Need help to connect!

[dezon]

Hello guys,
I made everything as Chumpy said and in CentOS is everything ok.
I ping with other pcs the CentOS and its ok.
Ping other pcs from CentOS and its ok.
Ping internet from CentOS and its ok.

The instalation was without bugs, everything is ok when i type service cabal status like:

[root@dhcppc2 ~]# service cabal status
GlobalDBAgent (pid 14003) is running...
GlobalMgrSvr (pid 14018) is running...
CashDBAgent (pid 14023) is running...
DBAgent_01 (pid 14038) is running...
ChatNode_01 (pid 14310) is running...
WorldSvr_01_01 (pid 14340) is running...
LoginSvr_01 (pid 14067) is running...
[root@dhcppc2 ~]#

The CentOS ip is: 192.168.1.33, yes, I have router but I can log in with PUTTY and WINSCP withuot problem.
The client do not says nothing, just the loader bar comes to the end with the simple message: Try later.

Any idea?
ps.: sorry for english =\

[MentaL]

[Annabeth]

Man , check ip language.enc , internal.txt servlist.txt in client ^^

[xSilvan]

try to unlock Port 38101 and 38121 :D or send here log....

[dezon]

try to unlock Port 38101 and 38121 :D or send here log....

Im running the server on LAN, is needed to unlock there ports?
How can I find the logs?

Man , check ip language.enc , internal.txt servlist.txt in client ^^

Hello, how do I change the language.enc IP?
My client folder does not have servlist.txt only internal.txt and I setup CentOS IP.

Thanks to ALL!

---------- Post added at 06:29 PM ---------- Previous post was at 04:52 PM ----------

Well guys, let me explain more:
I have 2 pcs:

1) Running windows 7 ultimate 32bits that I have installed mssql 2005 express also installed virtual box (I have more experience than vmware and I had no problem on networking), also installed CentOS 5.6 and also installed the chumpywumpy repack 2.81.

2) Running windowx xp sp3 only for playing.

In the host PC (win7), I had no problem to ping the Win XP pc and vice versa.
In the Virtual Machine with CentOS, I can ping the Host (win 7) also I can ping the Win XP and vice versa on the all pcs.

In the win xp pc, I used Putty to test the connectivity and no problem on testing, also made from win 7 and no problem too.

I installed the repack 2.81 from chumpywumpy and no problem too.
At mssql, I followed the chumpywumpy tutorial pdf, I made as he said there and no problem too, all databases was restored and etc.

At end of cabal server instalation, if I type "service cabal status", it says that all server is ON (green).

The ips!!!!!
Well, the win7 Ip is: 192.168.1.31
the CentOS ip is: 192.168.1.33
and the XP ip is: 192.168.1.32.

At the internal.txt I changed the 127.0.0.1 ip to 192.168.1.33 and I tried to connect, but the blue loader bar still comming to the end and saying "please, try later".

I already created some accounts using the GM TOOLs and It worked.

Any idea?!

ps.: Thanks for all help!

[monster119]

How about to give us you'r logs... ???

I think it would help us a lot....

Cheers ;)

[dezon]

How about to give us you'r logs... ???

I think it would help us a lot....

Cheers ;)

Ok sir, here we go: cabal.rar
Thanks in advance !!!

---------- Post added at 10:16 PM ---------- Previous post was at 10:06 PM ----------

Guys, I've tried to re-install the cabal_config but now, Im having this error:

Here's a copy of all actions in time of installation!

[root@dhcppc2 ~]# cabal_config

################################################################################
########################## The Divinity Project v2.81 ##########################
############# Cabal Online server setup script by mrmagoo (chumpy) #############
################################################################################
Stopping the server... cat: /etc/cabal/server_list: No such file or directory
done.
Removing old configuration... done.

Do you want to delete old logfiles? [Y] : y
Deleting old logfiles...

Do you want me to find your WAN IP? [Y] : n
Finding local IP: 192.168.1.33

Use the WAN IP for a public server.
If the local IP is different use it for a LAN only (offline) server.

Server IP address [] : 192.168.1.33
Enter MSSQL server IP : 192.168.1.31
Enter MSSQL DB username : sa
Enter MSSQL DB password (text is not displayed) :
Enter log level [3] : 3
Enter max players per channel [100] : 10

Configurations available :
 1 - Mercury (1 chan. Normal)
 2 - Venus  (1 chan. PK)
 3 - Mars (1 chan. War)
 4 - Jupiter (1 chan. Tierra Gloriosa)
 5 - Saturn (2 chan. Normal/TG)
 6 - Neptune (3 chan. Normal/War/Tierra Gloriosa)
 7 - Pluto (3 chan. PK/War/Tierra Gloriosa)
 8 - Leo (4 chan. Normal/PK/Prem War/Tierra Gloriosa)
 9 - Sirius (4 chan. Normal/PK/War/Tierra Gloriosa)
10 - Draco (5 chan. Normal/Prem/Prem PK/Prem War/TG)
11 - Test Server (1 chan. PK)
12 - Duality (2 server, 1 norm and 1 War channel)
20 - Divinity (3 server, 1 norm and 1 PK channel each)

Enter a configuration [11] : 1
Total RAM available: 756 MB, estimated RAM usage: 250 MB

Initialising Mercury configuration...
GlobalDBAgent: link... ini... service.
GlobalMgrSvr: ini... service.
CashDBAgent: link... ini... service.
DBAgent_01: link... ini... service.
ChatNode_01: link... ini... service.
WorldSvr_01_01: link... ini... service.
LoginSvr_01: link... ini... service.
Creating: Common.ini... odbc.ini...
Setting permissions...
Creating: Const.scp...

Setup complete. Start the service? [Y] :y

/etc/init.d/cabal: /home/cabal/daemons/wancheck_daemon.sh: /bin/sh^M: bad interpreter: No such file or directory
Starting GlobalDBAgent:                                    [  OK  ]
Starting GlobalMgrSvr:                                     [  OK  ]
Starting CashDBAgent:                                      [  OK  ]
Starting DBAgent_01:                                       [  OK  ]
Starting ChatNode_01:                                      [  OK  ]
Starting WorldSvr_01_01:                                   [  OK  ]
Starting LoginSvr_01:                                      [  OK  ]

Enable auto restart of stopped/crashed services? [N] : y
Auto restart enabled.

All done. Run me again any time to change your config.
Rates are set to 1x. If you want to change this type cabal_rates.

[root@dhcppc2 ~]#

Thanks!

[Annabeth]

< Speak Braziliam : Cara é só você usar o encpacker pra editar o language.enc , language.enc fica na pasta data do cabal ^^ . e internal tbn , servlist na pasta do client olhe direito q vc vai encontra se não tiver e pq ta faltando files. >

Speak English : Guy , you need use encpacker for unpack "language.enc" for change it ^^ . you use IP of Cent0s , later pack e move for folder data ^^. you don't have Language.enc ServerList or internal? you client no have all files ^^ check.

Speak Portuguese : Erro no logs então voce faz o seguinte . Executa o Comando no Putty >>"cd /root"<< depois voce coloca cabal_install se for Centos4.8 . se for a forma mas antiga vc usa > cabal_install.sh daê você executando aparecerar "Upgrade you serv "
coloque "N" duas vezes , dps "Y" em tudo qando termina de atualiza é so usa o cabal_config e tenta novamente ^^

Speak English : ERRO ON LOGS you need use comand "cd /root/" later use "cabal_install" for Cent0s4.8 for Cent0s4.5 you need use "cd /root/cabal_install.sh " later "N" two times later "Y" for all time ,later you use cabal_config for Cent0s4.8 , Cent0s4.5 you use /home/cabal/cabal_config.sh ^^

OBS : Usa outro canal , usa canal 11 " Use other channel , use channel 11 " channel 1 can have bugs



SORRY BAD ENGLISH ><

[dezon]

< Speak Braziliam : Cara é só você usar o encpacker pra editar o language.enc , language.enc fica na pasta data do cabal ^^ . e internal tbn , servlist na pasta do client olhe direito q vc vai encontra se não tiver e pq ta faltando files. >

Speak English : Guy , you need use encpacker for unpack "language.enc" for change it ^^ . you use IP of Cent0s , later pack e move for folder data ^^. you don't have Language.enc ServerList or internal? you client no have all files ^^ check.

Speak Portuguese : Erro no logs então voce faz o seguinte . Executa o Comando no Putty >>"cd /root"<< depois voce coloca cabal_install se for Centos4.8 . se for a forma mas antiga vc usa > cabal_install.sh daê você executando aparecerar "Upgrade you serv "
coloque "N" duas vezes , dps "Y" em tudo qando termina de atualiza é so usa o cabal_config e tenta novamente ^^

Speak English : ERRO ON LOGS you need use comand "cd /root/" later use "cabal_install" for Cent0s4.8 for Cent0s4.5 you need use "cd /root/cabal_install.sh " later "N" two times later "Y" for all time ,later you use cabal_config for Cent0s4.8 , Cent0s4.5 you use /home/cabal/cabal_config.sh ^^

OBS : Usa outro canal , usa canal 11 " Use other channel , use channel 11 " channel 1 can have bugs



SORRY BAD ENGLISH ><

Ok man, thanks for you help !!!
But, a question: when I get "Server IP address [xxx.xxx.xxx.xxx]", I leave the WAN IP or can I put the LAN IP (CentOS IP)?

Thanks!!!

PT-BR
Ok cara, valew pela força!
Mas tipo, quando aparece lá "Server IP address [xxx.xxx.xxx.xxx]", deixo o IP da internet ou eu posso deixar o ip do CentOS?!

Brigado!!!

[Annabeth]

Ok man, thanks for you help !!!
But, a question: when I get "Server IP address [xxx.xxx.xxx.xxx]", I leave the WAN IP or can I put the LAN IP (CentOS IP)?

Thanks!!!

PT-BR
Ok cara, valew pela força!
Mas tipo, quando aparece lá "Server IP address [xxx.xxx.xxx.xxx]", deixo o IP da internet ou eu posso deixar o ip do CentOS?!

Brigado!!!

Cara vc tem que coloca o ip do server no caso o IP do Cent0s é servidor dedicado ? ou caseiro ?

Guy, use ip of Cent0s in server ip address

[dezon]

Cara vc tem que coloca o ip do server no caso o IP do Cent0s é servidor dedicado ? ou caseiro ?

Guy, use ip of Cent0s in server ip address

Brother, caseirão mesmo kkk, eu botei o IP do CentOS até que agora a instalação não sei porque foi melhor mas ví nos log erro com o MSSQL agora e não acho solução, já procurei aqui mas nada, vou postar os logs.
Valew!

ENGLISH:
Brother, I got now another error with the DB MSSQL, I'll post the new log files.

Thanks anyways!

>>> NEW LOG FILES: cabal.zip

[Annabeth]

Portuguese ; cara manda seu email pra eu ajuda voce. mas manda private
English ; send you email on private for I'm help you

[Yamachi]

Portuguese ; cara manda seu email pra eu ajuda voce. mas manda private
English ; send you email on private for I'm help you

No, we do not do that here... If you want to help someone, do it in public in the thread that they've made. If someone else has the same problem, they will see your answer. This means less duplicate threads.

[Alphakilo23]

/etc/init.d/cabal: /home/cabal/daemons/wancheck_daemon.sh: /bin/sh^M: bad interpreter: No such file or directory

Your /home/cabal/daemons/wancheck_daemon.sh is in the DOS file format, Linux complains about the line break format.
try this:

dos2unix /home/cabal/daemons/wancheck_daemon.sh

It won't fix your original problem, though.

[dezon]

No, we do not do that here... If you want to help someone, do it in public in the thread that they've made. If someone else has the same problem, they will see your answer. This means less duplicate threads.

Yes, I agree with you, becouse this, I decided to remove my all configuration files include the virtual workstation and start a new one following again with more attention chumpywumpy tutorials.
Whem I get the server online I'll post here the solution for everyone!!!!
I believe that my real problem is becouse I'm not using the VMWare, I'm using Virtual Box so, I'm now trying on VMWare!!!
Thanks!

[dezon]

Hello Guys,
Maybe now, the server is running without problems but, the client still wont connect to the server!!!

Here is my new logs: cabal log.7z

Can any one check this files please and tell me what is wrong?!

Thanks anyway!

[11223344556677]

Maybe ur lagging ?

[Alphakilo23]

Hello Guys,
Maybe now, the server is running without problems but, the client still wont connect to the server!!!

Your LoginSrv_01.log doens't show any login attempts.
This indicates a network problem. Please double check your network configuration (VMWare adapters, Firewalls, port forwarding).

Maybe ur lagging ?

If it was due to network latency / drop the login server would've at least recorded a login attempt.

[dezon]

@11223344556677 - I think not becouse I'm on LAN, impossible laggin, host pc is cool running on Core i3 etc

@Alphakilo23 - I agree with you but, I really found the bug, the msssql was running with it port blocked, I released the port on the windows firewall and now it's working.

I had some other problems but now I understand how to "read" the logs and I made some configuration to my server become stable.
I think all is working fine!

To all guys that helped me, thank so much!
Good bye guys!