Can someone help me please I can not connect my WinSCP on CentOS
Ip of CentOS entered nix happen
Timeout shows me he is always on
pls help
guilty for my English
Can someone help me please I can not connect my WinSCP on CentOS
Ip of CentOS entered nix happen
Timeout shows me he is always on
pls help
guilty for my English
same thing for me...but it coud be because i have dynamic ip and dont know what ip's so set
But first of all answear to mansen and then if some1 know answear to me aswell
Can you ping the centos IP? You won't be able to connect unless you can ping it.
Make sure you are trying to connect to the correct ip by checking "ifconfic" on centos. Also i would recommend manually supplying centos with an ip address as i am convinced a lot of these networking problems are down to people with routers having 2 DHCP servers (your router and the vmware one) and the wrong one is handing out the ip which stops communication somehow. i have never had these problems, but i always specify the ip manually.
do you mean "ifconfig"? anyways thanks a lot for the help i was searching this forum for that... thank you very much!!! it helped a lot! go Chumpy!Originally Posted by chumpywumpy
i can ping my ip but the only thing its that winSCP and putty cant connect to the centos....says something like connection refused....but when i installed WMware at IP settings i selected the dynamic 1 because my ip its like that and im thinking now maybe this would be the problem....dynamic ip can be sometime very annoying because doesent exist a program that can "freez" the curent ip
Oops yes it's "ifconfig". Typing too fast :P
If you don't have a lan (i.e. you windows ip doesn't start with 192, 10 or 172) then your vmware netwroking should be set to NAT not bridged.
Can you post the last 2 octets of your windows and centos ip (e.g. xxx.xxx.123.456, leave the first 2 out for security) as it will give me an idea of how your network is configured.
il post the first part of each ip in case you need it
The Local Are Connection is 169.xxx.35.79
And im using an internet that connects via username and password...so i have 2 connections for starting the internet...the second 1 is 86.xxx.138.94
im installing again now VMware because i formated my pc...i will set now NAT connection not bridget
Ah, you have a LAN so VMware networking should be on bridged.
I would manually supply the ip address, netmask and gateway to the centos machine. I'm convinced that these mysterious networking problems are down to conflicts with 2 different DHCP servers (the router and the vmware one). I'm guessing the subnet mask for the local area connection is 255.255.255.0 so set your centos to something like 169.xxx.35.100 and the same netmask and gateway as the windows local area. That will stop it using DHCP and might fix it.
yea....subnet mask its 255.255.0.0(you wear close anyway)....il try now to re-set the ip and i will tell you after if it succedet
chumpy can you help my plss? because at winscp i tryed use my router ip 192.xxx.x.3 and 192.xxx.x.1 bu t winscp give my connection refuse and idk what to do plss help my. Yahoo id: nightsro_nightsro add my plss
Install openssh server and disable your firewall:
yum install openssh-server
iptables -F
Reply With Quote