Server type problem to channel

[devit65]

I get this error when I type the server 128 to 01
Where do you think the problem


LoginSvr_01 log

[Sun Mar 24 2013 10:21:57.403640 3078511504]: [##ERROR##] OnCSCVerifyLinks(): NonClient UserNum(1), ip(192.168.1.150), Key(543957823, 0)
[Sun Mar 24 2013 10:21:57.870402 3078511504]: [##ERROR##] OnCSCVerifyLinks(): isSendVerifyPacket fail
[Sun Mar 24 2013 10:21:57.870481 3078511504]: [##ERROR##] 'OnCSCVerifyLinks' fail (Proc/Verify.cpp:55)
[Sun Mar 24 2013 10:21:57.870506 3078511504]: [##ERROR##] UsrMap Fail : MainCmd(102) Ret(37:0:55) Addr(192.168.1.150) CharIdx(0)
[Sun Mar 24 2013 10:21:57.870800 3078511504]: close(): closing(192.168.1.150)
[Sun Mar 24 2013 10:21:57.871418 3078511504]: 1.close user -1 [9DDEDD8] (192.168.1.150)
[Sun Mar 24 2013 10:22:24.491833 3086813680]: success accept 13(192.168.1.150:49458)
[Sun Mar 24 2013 10:22:24.492300 3086813680]: 1.open user 13 [9DDEDD8] (192.168.1.150)
[Sun Mar 24 2013 10:22:24.507660 3078511504]: [PreImage] Request Pass : UserID(devit65), UserIP(192.168.1.150)
[Sun Mar 24 2013 10:22:24.524962 3078511504]: AuthRequest: UserID(devit65), Addr(192.168.1.150)
[Sun Mar 24 2013 10:22:24.532937 3078511504]: ChangeToCheckData(): 1 user's auth Type (0)
[Sun Mar 24 2013 10:22:24.533379 3078511504]: AuthResult: UserID(devit65), Addr(192.168.1.150), Result(32), UserNum(1)
[Sun Mar 24 2013 10:22:27.143641 3078511504]: [##ERROR##] OnCSCVerifyLinks(): NonClient UserNum(1), ip(192.168.1.150), Key(543957823, 0)

WorldSvr_01_01 log

[Sun Mar 24 2013 10:22:44.559902 3085585296]: [##ERROR##] StatSchedule(): Verify Timeover(0)
[Sun Mar 24 2013 10:22:44.560648 3085585296]: close(): closing(192.168.1.150)
[Sun Mar 24 2013 10:22:44.562576 3085585296]: 1.close user -1 [A7406CC0] (192.168.1.150)

[MentaL]

[toast2250]

From the default layout, server 128 has a maintenance channel setup for which you need a IP of the client to enter. The DefaultServerCfg has a trade channel setup. Is your magickey mismatched?

I suggest you to completely remake the GlobalMgrSvr.ini to the layout of server and channels you want.

http://forum.ragezone.com/f460/serve...-types-911074/

[JemCanoy]

dont change server 128 to server 1 instead of changing it just create [Server01] below [DefaultServerCfg]

example

[DefaultServerCfg]

[Server01]
ServerType=16

[devit65]

From the default layout, server 128 has a maintenance channel setup for which you need a IP of the client to enter. The DefaultServerCfg has a trade channel setup. Is your magickey mismatched?

I suggest you to completely remake the GlobalMgrSvr.ini to the layout of server and channels you want.

http://forum.ragezone.com/f460/serve...-types-911074/

[DefaultServerCfg]

[Server128]
ServerType=16 working


[DefaultServerCfg]

[Server01]
ServerType=16 does not work


cause ??

[JemCanoy]

[DefaultServerCfg]

[Server128]
ServerType=16 working


[DefaultServerCfg]

[Server01]
ServerType=16 does not work


cause ??

just try to remove [DefaultServerCfg] to make [Server01] work

[knight90]

Because server 01 has the trade channel as default as a maintenance channel, try searching the channel 1 number on globalmgrsvr and changed it back to 1024 which is trade!