Printable View
Anyone can help me? I can't open my ports even though i had configured my port forwarding options in the router. I had configured the firewall and tried everything, still the canyouseeme.org result is this:
Error: I could not see your service on ***.***.***.***on port (44405)
Reason: Connection timed out
Error: I could not see your service on ***.***.***.***on port (55901)
Reason: Connection timed out
PLEASE HELP ME?? Your help is very much appreciated
Do you try to check your port when your server is running or not? because server must be running in order to success.
Else you will have to portforward correctly be sure you portforwareded theports on your LAN IP (IPv4 from run>cmd>ipconfig
and it should normally work.
I had tried it sir, but it still won't work. I used my IPv4, still it wont open ports. I had searched if my ISP was blocking it but its fine. anymore solutions sir?Quote:
Originally Posted by KarLi
No more solutions, call your internet and ask them.
Perhaps, do you use wireless connection? because that might be the issue.
im using lan connection sirQuote:
Originally Posted by KarLi
can you show me screenshots 2-3 how you open your ports?Quote:
Originally Posted by whitecrow2420
try to allowed the program in your firewall
i use wirless connection and my ports are fine sometimes it lan that cause it.Have u tried turning off your firewall?
I cant take screenshot for now.. But i followed those instructions made by ragezone members. Here's a screenshot of my router.Quote:
Originally Posted by KarLi
http://imageshack.com/a/img911/7213/caeQL4.jpg
I had already configured my firewall with my IPv4 and ports 44405 TCP and 55901 UDP.
I run my server files then I checked my ports, but still the result is the same. I'm using Windows XP SP2
- - - Updated - - -
i already did it.Quote:
Originally Posted by Heart4Ever
- - - Updated - - -
I already tried turning it off and on many times.Quote:
Originally Posted by dragonseth
@whitecrow2420
dont use mixed port types / tcp/udp/both
use for all Both and recheck again.
I have an Dedicated Server win2kr2 .. I try to open port in Window Firewall. But still have the same problem with him on router.
Anyone can help please?
Did you buy that dedicated server? maybe you need to ask your host to unblock UDP/TCP portforwarding.
YES. i bought it. and i try to ask them so they said they not block any port at the end. But when we try to add port in WindowFirewall. The port checker still coming up with Port still closed.Quote:
Originally Posted by KarLi
You know why ? any solution?
Do you run your server first and then see if ports are opened?
because port must be running to be working.
if yes, try to do it not in firewall but in router settings.
it Dedicated Server. You not able to open in router only in Firewall. Thanks i will try later.
- - - Updated - - -
it Dedicated Server. You not able to open in router only in Firewall. Thanks i will try later.
Your host must help you do it mate, they tell you to do it on firewall yes, normally it should work through the firewall.
This may sound stupid and a long shot but some modems have a built in firewall
if you're using a modem AND a router, please make sure you have opened the ports on BOTH.
this is quite the pain in the arse since I had a modem and router combo and they both hard firewalls.
what I did was:
Open modem interface > Set static IP for router i.e 192.168.1.110 (example)
Then open router > set a static LOCAL IP for the server machine
then on the dedicated server machine, open the IPV4 settings and set the IP in question.
It doesn't matter if you do it in this order or opposite, just make sure everything is opened.
If it is, and you're still blocked, chance is your ISP is blocking your ports.
In that case, change ISP