Hexing the "ProjectG.exe" And Discussion ( Season 1)

Target Version: 2.14c
Target IP: 192.168.0.1 / 127.0.0.1

Step 1. Unpacking ProjectG.exe with PEID. (PEID v0.93 Attached)

http://noriteri.ipop.co.kr/cgi-bin/n...4346038&type=2
... Look at above image for how to do it.


Step 2. Open unpacked.exe from your HEX Editor such as UE32, HE


Step 3. Change IP's

[Auth Server]
FIND: 32 30 32 2E 31 30 2E 33 32 2E 32 31 - 202.10.32.21
CHANGE: 31 39 32 2E 31 36 38 2E 30 2E 31 00 - 192.168.0.1

If you change ip's to 127.0.0.1 than this is a code for it.
31 32 37 2E 30 2E 30 2E 31 00 00 00

[Login Server]
FIND: 32 31 31 2E 34 33 2E 31 39 34 2E 32 32 - 211.43.194.2
CHANGE: 31 39 32 2E 31 36 38 2E 30 2E 31 00 00 - 192.168.0.1

If you change ip's to 127.0.0.1 than this is a code for it.
31 32 37 2E 30 2E 30 2E 31 00 00 00 00

[Game Server]
FIND: 36 31 2E 33 33 2E 36 35 2E 31 36 31 - 61.33.65.161
CHANGE: 31 39 32 2E 31 36 38 2E 30 2E 31 00 - 192.168.0.1

If you change ip's to 127.0.0.1 than this is a code for it.
31 32 37 2E 30 2E 30 2E 31 00 00 00

[BEFORE]
http://noriteri.ipop.co.kr/cgi-bin/n...4346011&type=2

[AFTER]
http://noriteri.ipop.co.kr/cgi-bin/n...4346012&type=2


Step 4. Change Client Version
FIND: 32 2E 31 34 63 5F 74 65 73 74 5F 30 30 - 2.14c_test_00
CHANGE: 32 2E 31 34 63 00 00 00 00 00 00 00 00 - 2.14c


Step 5. Disable Hack Shield
FIND: 8D50055783C9FF33C08BFAF2AEF7D1490F84
CHANGE: 8D50055783C9FF33C08BFAF2AEF7D14990E9


Step 6. Disable update routine (Disable -babo)
FIND: C0752353
CHANGE: C0EB2353


Step 7. Save and change file name from unpacked.exe to whatever you like such as ProjectG.exe or update.exe


.:: Changing Reference of LegacyProjectG to work on Windows 2k5 and below ( win98,etc )

1] Open up your favorite Hex editor
2] Search forBF02526573746F72654C6173744572726F72

3] Replace With A2025365744C6173744572726F7200000000
4] Save, and enjoy

Credits to: W1N9zr0 of the LG Team.
And me of course ( LGKeiz )
Edited on Saturday, April 15, 2006

Thanks a lot advenire! YOU THE MAN!!!

thanks, i will check this thing... ;)

great guide thx :angel_hyp

how do you find those Hex numbers are for disabling hackshield?

Code:

---

Step 5. Disable Hack Shield
  8D50055783C9FF33C08BFAF2AEF7D1490F84
  8D50055783C9FF33C08BFAF2AEF7D14990E9

---

how can i use PEID??
i don't konw how to unpack ProjectG.exe

O.o why must you change the IP's in the EXE's what changes?

oh the gameguard will cause the PEID to break >_< how to unpack if it has a gameguard?

ok i get it already thank you

Quote:

---

Originally Posted by pistonhonda

how do you find those Hex numbers are for disabling hackshield?

Code:

---

Step 5. Disable Hack Shield
  8D50055783C9FF33C08BFAF2AEF7D1490F84
  8D50055783C9FF33C08BFAF2AEF7D14990E9

---

---

i can't find it too. somebody help us!!!

Is it possible to hex a DNS server address to the exe? Since I have dynamic IP, I was wondering if it is possible.

Thanks.

Out,
~AznSoldier

i would like to know, how to pack projectG.exe to the original projectG after i change IP already
For hide my IP like you open Projectg.exe(original) you can't find my IP
Thank you all of you

Quote:

---

Originally Posted by sunggamer

i would like to know, how to pack projectG.exe to the original projectG after i change IP already
For hide my IP like you open Projectg.exe(original) you can't find my IP
Thank you all of you

---

Using aspack.exe to pack it but aspack isn't freeware.

Quote:

---

Originally Posted by sunggamer

i can't find it too. somebody help us!!!

---

Find last 8 digit code it looks like D1490F84 than change it to D14990E9.

I already search
83C9FF33C08BFAF2AEF7D1490F84
But i have found 3 places
Which one i have to replace or change all?
ps. i use thai client(unpack already)
Thank you very much for your reply

Quote:

---

Originally Posted by advenire

Using aspack.exe to pack it but aspack isn't freeware.

---

Thnk you vermuch

Quote:

---

Originally Posted by sunggamer

I already search
83C9FF33C08BFAF2AEF7D1490F84
But i have found 3 places
Which one i have to replace or change all?
ps. i use thai client(unpack already)
Thank you very much for your reply

---

replace all

added to Guides & Tools & Fixes, Great job.

Like projectG_LAN.exe launch.ini file something like that
because my internet change IP everytime that i reconnect
PS. i can't use DNS to refer my IP also...

Anyone HELP please. thank you very much

Quote:

---

Originally Posted by sunggamer

Like projectG_LAN.exe launch.ini file something like that
because my internet change IP everytime that i reconnect
PS. i can't use DNS to refer my IP also...

Anyone HELP please. thank you very much

---

you can use localhost ip (127.0.0.1)

I have move to the new thread just find in this link
http://forum.ragezone.com/pangya-onl...er-115969.html

Quote:

---

Originally Posted by sunggamer

This app i develop by VB6.0 for pangya patch version 2.14f_test_03
you can use IP or DNS on the first line of serverip.txt

---

So Cooooooooooooool ~ ^^

Quote:

---

Originally Posted by sunggamer

this version you can set client version

---

Err ... Is this program works for 2.14f only?

is there a possible way to disable gameguard?

Quote:

---

Originally Posted by Chibi Dream

is there a possible way to disable gameguard?

---

Hack Shield is same as gameguard.

Is the hex strings being posted is for what client? or is it for all client?

Can you explain howto unpack projectG.exe with PEID or Olly?

I realy want to know very much....

Thank you

Quote:

---

Originally Posted by advenire

Err ... Is this program works for 2.14f only?

---

Yes!!!
But you can modify your projectOri.exe by yourself
1. you must change 3 IPs near 127.0.0.1 to .....
Hex code 00 00 00 00
2. let's see your patch version and type the correct patch version to 2'nd line in txt files
3. you must diable game gaurd(See instruction on first page of this thread)
4. Change to disable to type -babo also
5. Have fun your new pangya patch...

Quote:

---

Originally Posted by grape

Can you explain howto unpack projectG.exe with PEID or Olly?

I realy want to know very much....

Thank you

---

Look at attached image.

Quote:

---

Originally Posted by Chibi Dream

Is the hex strings being posted is for what client? or is it for all client?

---

Until now, those addresses inside ProjectG.exe (Indonesia version) are same as guide.

thanks,. btw when I try to unpack project G I get an error saying

"No UPX signature were found.".

mmm what client that u use??? indonesian,thailand or what??

english/international

Quote:

---

Originally Posted by Chibi Dream

english/international

---

Well, that English version's of PangYa isn't packed by UPX. Only program which packed by UPX can unpacking with PEID.

An English version of PangYa was packed by ASProtect.

i think that using asp protec..

u can see in pe id what protech that projectg use.

Thank you so much advenire

there is not launcer......... u must hack the projectg.exe.....plzzz read all post

sorry for my bad english

projectg_lan sudah tidak bisa dipakai.u harus hack projcetg ganti ipnya... baca saja ada caranya kok

it said No UPX Signature were found -- then I press OK, still want to try unpack it? --

I click Yes -- then it said were unable to find OEP, could be a modified version.

when I try to unpack UPX

it said No UPX Signature were found -- then I press OK, still want to try unpack it? --

I click Yes -- then it said were unable to find OEP, could be a modified version.

Quote:

---

Originally Posted by cobraslayer

when I try to unpack UPX

it said No UPX Signature were found -- then I press OK, still want to try unpack it? --

I click Yes -- then it said were unable to find OEP, could be a modified version.

---

you must install upxplugin. it is an *.dll file. someone has posted this plugin somewhere in this subforum. i cannot remember. sorry... use search tool.

That upx plugin include attached PEID.rar

Quote:

---

Originally Posted by cobraslayer

when I try to unpack UPX

it said No UPX Signature were found -- then I press OK, still want to try unpack it? --

I click Yes -- then it said were unable to find OEP, could be a modified version.

---

Where did you do unpack processing?

Unpack PangYa.exe must located it's own installed folder. (C:\Program Files\Ntreev\PangYa)

Cobraslayer, I bet your ProjectG.exe is packed with ASProtect 1.23 rc4. What does the message line in PEID tell you, ASProtect or UPX? The Philippine ProjectG.exe version is packed with ASProtect 1.23 rc4. At first I also did not notice, so I used the Unpacker for UPX plugin, it also said no UPX signature found, I also pressed Yes when it said if I want to continue anyway, it also produced the same message (cannot find OEP). When I rechecked the message line, it said ASProtect, not UPX.

Anyone experienced enough in unpacking ASProtect 1.23 rc4 packed files? Or has anyone unpacked a ProjectG.exe packed by ASProtect? I need help please. Thanks in advance.

Quote:

---

Originally Posted by yaozer

Cobraslayer, I bet your ProjectG.exe is packed with ASProtect 1.23 rc4. What does the message line in PEID tell you, ASProtect or UPX? The Philippine ProjectG.exe version is packed with ASProtect 1.23 rc4. At first I also did not notice, so I used the Unpacker for UPX plugin, it also said no UPX signature found, I also pressed Yes when it said if I want to continue anyway, it also produced the same message (cannot find OEP). When I rechecked the message line, it said ASProtect, not UPX.

Anyone experienced enough in unpacking ASProtect 1.23 rc4 packed files? Or has anyone unpacked a ProjectG.exe packed by ASProtect? I need help please. Thanks in advance.

---

I did it before for Korean Season 2.
It was very complicated to do.
I will write down here, how to do it.

You will need below tools to unpack ASProtected files.
1. DisAssembler
2. Debugger Tool
3. HEX Editor
4. File Analyzers Packer Detector
5. Unpacker
6. Patch Builder
7. Packer
8. Resource Editor

I am using 2.14f and I can't find the 2.14c_test_00 how do find it

Quote:

---

Originally Posted by cobraslayer

I am using 2.14f and I can't find the 2.14c_test_00 how do find it

---

Using ASCII search mode for find 2.14f

OR

Find: 32 2E 31 34 66 5F 74 65 73 74 5F 30 30 (2.14f_test_00)
Change: 32 2E 31 34 66 00 00 00 00 00 00 00 00 (2.14f)

Hi

I play the Brazilian version of Pangya (2.14a)

I have read Advenire's guide but didn't understand very well.. the guide is about creating private pangya servers?

Because only thing I want is to hack my pangya client to desable Hack Shield and use cheats...

I wasn’t able to run the game after patching the IP adresses (program freezes or says ‘unable to connect to login server’)

I also didn’t find the bytes for ‘change client version’ . (What’s the purpose of that?)

Then I patched only the bytes for ‘disable HackShield’ and ‘disable update routine’ and the game seems to run fine.

So what’s the purpose of changing those IPs, if I can play the game even without changing them?

Also, if I play even so, can they know that I'm running a hacked version of PangYa?

Thank in advance.

[QUOTE=woody020971]Hi

I play the Brazilian version of Pangya (2.14a)

I have read Advenire's guide but didn't understand very well.. the guide is about creating private pangya servers?

Because only thing I want is to hack my pangya client to desable Hack Shield and use cheats...

I wasn

I have gotten this message from the login server
"AcceptEx() failed in TrigAcpt(): 10055"
What does it mean? and what should I do?
I'm just a newbie here. Thx a lot for your help.

This time, it showed that "Register to Server failed" and "LSCD closed"
It automatically closed itself. What should I do???? T_T

However, when I change the IP address back to 127.0.0.1, the problem i mentioned above is gone, but it shows "AcceptEx() failed in TrigAcpt(): 10055" again.
I don't know what it means. Please help

i have change all step but i can't change step 4 to find
Step 4. Change Client Version
FIND: 32 2E 31 34 63 5F 74 65 73 74 5F 30 30 - 2.14c_test_00
CHANGE: 32 2E 31 34 63 00 00 00 00 00 00 00 00 - 2.14c

thank's for your answer !

Im using 2.5...so I cant find the strings..nid help!

file rar is broken.i can't use it.when i redownload file is bad.

Hi, I'm playing Pangya Philippines, and I tried searching the hex strings in the post here, but to no avail. Does anyone know what to do to disable nprotect? The client shuts down when I run it with Pangya Helper.

Thanks! :3dflagsdo

ASProtect 1.23 RC4 - 1.3.08.24 -> Alexey Solodovnikov

No UPX found ummm what shall i do??? this is Pangya Philippines

can some one please help me produce a gproject.exe 2.15b?
IP: pangya.bounceme.net
i have been trying to edit my ip for days, i wish u all could help me, i have some error, so please dont ask me to try again, i have even seen the video trail, i seen all posts, please help me produce this gproject.exe, i will specially thank you for that

[PIE]hellos. how can i find strings? i cant find even a single one. please help me. i need it..[/PIE]

:(:(:(

Why it's said [0xc0000005] exception error raised at [0x01fd680f] what is it

Step 5. Disable Hack Shield
8D50055783C9FF33C08BFAF2AEF7D1490F84
8D50055783C9FF33C08BFAF2AEF7D14990E9


i cant find helpppp please

i cant login please help

the hex strings are the same on all versions of pangya?

Quote:

---

Originally Posted by coioti

the hex strings are the same on all versions of pangya?

---

Not all.

i could disable hack shield and use pangya helper with no problem, but cant see the force o the wind lol; its all black the window where i supose to see the wind.
the version is 2.16
is this some kind of protection when we disable hack shield?????

Don't think so, it should be different server causes different thing.
Hmm... I mean the server file we using aren't suitable for the client you using.

ah ok ty for help bro

Does this work on KalOnline? What hexeditor should I use? Is it safe? Can I use SpeedHack then?

Does it work for KalOnline?

Quote:

---

Originally Posted by Kaldude

Does this work on KalOnline? What hexeditor should I use? Is it safe? Can I use SpeedHack then?

Does it work for KalOnline?

---

No its does not, but im finding out how it will...

hi has someone tried to hex the projectG.exe of pangya philippines? if someone has done it can someone send me a pm or send me a pm of the link? tnx in advance
oh btw the version is 2.21c and if someone wants to request the projectg.exe of pangya philippines im happy to upload it or send it! tnx again!

Quote:

---

Originally Posted by xopj

ASProtect 1.23 RC4 - 1.3.08.24 -> Alexey Solodovnikov

No UPX found ummm what shall i do??? this is Pangya Philippines

---

Can unpack with stripper.

help. i tried stripper but after i unpacked the file, i couldnt find the gameguard's hex string. :/ Anyone knows how to disable gameguard in JP pangya? Thanks alot.

Question is any of this possible in the english version?Because i tryed unpacking the ProjectG.exe Flie with both programs provided and i'me haveing no good luck.And thanks for the help.

no sorry, indonesian version only

Oh okay.Well sence the indonesian server blocks no indo ISP and i would like to play that version what other choices do i have?

Edit:Can somebody upload the img's again.Because on the disableing the hack sheld it says that thses are invalid Hex strings. pleaz thank you.

I Only can find this :

[Auth Server]
FIND: 32 30 32 2E 31 30 2E 33 32 2E 32 31 - 202.10.32.21
CHANGE: 31 39 32 2E 31 36 38 2E 30 2E 31 00 - 192.168.0.1

[Game Server]
FIND: 36 31 2E 33 33 2E 36 35 2E 31 36 31 - 61.33.65.161
CHANGE: 31 39 32 2E 31 36 38 2E 30 2E 31 00 - 192.168.0.1

Client Version
332E303062 - 3.00b

And here I couldnot find

[Login Server]
FIND: 32 31 31 2E 34 33 2E 31 39 34 2E 32 32 - 211.43.194.2
CHANGE: 31 39 32 2E 31 36 38 2E 30 2E 31 00 00 - 192.168.0.1

Disable Hack Shield
FIND: 8D50055783C9FF33C08BFAF2AEF7D1490F84
CHANGE: 8D50055783C9FF33C08BFAF2AEF7D14990E9

Disable update routine
FIND: C0752353
CHANGE: C0EB2353



Anyone know how to hack ProjecG.exe for PangYa Session 2 version 3.00 or 3.00b ?

And is it we had to use new server for playing it ?
anyone have it, please share withme.

Who can hex for me ip : 10.0.0.18 ?? thanks alot

hwen i install PANGYA HELPER it update normally, but it is blocked evrytime;
someone knows why it blocked?
tyvm

someone knows why my pangya helper is blocked?

hack shield or game guard is probably blocking you

Edit:

Quote:

---

Disable Hack Shield
FIND: 8D50055783C9FF33C08BFAF2AEF7D1490F84
CHANGE: 8D50055783C9FF33C08BFAF2AEF7D14990E9

---

I'm not sure that it works correctly... try to rename the hshield folder to verify if it is disabled or not...

idk how to install that thing because the picture doesn't show... can someone help me?

i dont know how to unpackin it... someone please help me or e-mail me with the picture at dian_231@yahoo.com

Quote:

---

Originally Posted by advenire

Hack Shield is same as gameguard.

---

hey will u please help me? i have the pangya helper but the gameguard blocked me please tell me how ,.... tell me with the picture cause i dont get this or e-mail me with the picture at dian_cumi@yahoo.com Ty so Much:ranting2:

thanks

my problem is when i open the peid.rar it says choose the program to open this file... can someone please tell me why??

my problem is when i opened the peid it says choose the program you want to use to open this file with...

you must install the upx unpacker plugin for PEID (google is your friend)

can somebody send me how to unpack projectG.exe..pls send on e-mail
nitros@net.hr
plizzzzzzzzzzzzzzzzz
thank you

can someone email me the files that are being used for the korean version season 2 so i can see the game in english please uberwarrior@hotmail.com thanks

down loaded 215b to 215c but non of the string 2 the ip`s work on projectG. cant find the ip`s

somebody has the configured PROJECTG ?

please SHARE...

I did not make this file ...

Thx

hello

i'm playing Pangya Philippines..i was able to unpacked PrjectG using Stripper but i cant find the hex strings for disabling game guard..

can somebody help me pls?...

hey can someone send me the projectg.exe thats allready been hexed and all
i will give send a fastloader(psp software) back to the person who sends me the projectg.exe that has been hexed

my email seiji-laura@hotmail.com

Hi guys,

i'm using 2.14b for the cLient and 2.14g for the server.
it worked but i can't create room in match and tourn.
i'm already change the reg, but still not working

how should i solve the problem?? anybody help me, please.....

im playing also pangya philippines version 3.00d...can anyone tell how to hex it..i already unpacked it...

where i can proyekg.exe?

please anyone give me the hex code for disable game guard in v3.05 pangyasea?

where is my credit. ^ ^!