Printable View
A present from a little fairy dropped into my lap so here to share:
English PT 3215.
It has all 11 classes (including Martial Artist)
Sea of abyss map.
Verus set
150 level cap.
Hope these get some joy.
I will be tinkering with them so i'll share info as I break things :D
https://mega.nz/#!r45FHa7B!jE8DIzqXJ...BuAaj1Ra_XG_RY
Enjoy :D
OMG, Downloading nowwwwwQuote:
Originally Posted by Phatkone
- - - Updated - - -
Could you upload this in other mirros too?Quote:
Originally Posted by Phatkone
It worked!!!Quote:
Originally Posted by Phatkone
@Phatkone could you have the match full source??
if i had the source i would have shared it obviously.Quote:
Originally Posted by wahaha
link off
No, it's not.Quote:
Originally Posted by sigrist
https://i.imgur.com/YnDFAPA.png
Try a different browser...
Can you help me with the offset for the limit of damage, defense and absorb?
I saw the "Hacking alert" in the LogFile and I cannot kill the monsters because the damage is just around 20 30
@SunnyZ u had released these files some weeks ago, and then u delete it ,right?
@SunnyZ do you think you could make a new VM with those files ? that would be awsome :)
Update :
I tried to do it myself but I failed :(
Update 2 :
Got it working, it was just a client side config issue.
A new VM would still be appreciated if possible
Hi,how can make it wor,still get the "unable to connect to server"í ½í¸¥í ½í¸¥í ½í¸¥Quote:
Originally Posted by EvilDan
I have just added those lines in the ptreg.rgx file in the client folder
"Server1" "192.168.1.93"
"Server2" "192.168.1.93"
"Server3" "192.168.1.93"
-> use your server ip adress obviously
- - - Updated - - -
I really hope it does cause its one of the best server I have been playing with. Thanks a lot for this release !Quote:
Hope these get some joy.
ty,it's working now,but when def above12000,the damage will drop to like 10,how to solve it?
Been playing with this release for a few days now and I must say its prettty much the best server I ever had. Sadly, the Verus Armor seems to be missing.
Anyone got a mixing editor that works with this ?
This came out pre- Verus gear, for some reason the martial artist class has verus though.Quote:
Originally Posted by EvilDan
as for mix editor, no.
however, i made a html/js/php based one for older files that I am going to tinker with and make work for these files.
I take that back, its definetly there -> Item DA302Quote:
Originally Posted by EvilDan
- - - Updated - - -
One thing that is bugging me is that I cant access BlessCastle, the npc wont let me teleport and says my account is not authorized or im underage. Any advice on that ?
- - - Updated - - -
That would be nice cause the original mixes are quite uselessQuote:
Originally Posted by Phatkone
sorry i was thinking of abyss items.
I'm getting disconnected pretty often when taking to npc. Best example I can give is if I go to force master in ricarten, make any force then click again on force master to make another one -> I get disconnected. On the server, the log file says "Empty NPC Call hack has been detected." Any idea how to fix this ??? im obviously not tryin to hack my own server :P
I also get disconnected when finishing the first rankup quest, log says "Redistribution Hack has been detected"
Please help, im lost on this
@EvilDan
That has been an issue for the last few versions. most notably saw it with the eura force master. not sure what causes it.
So I guess there is no hope to fix that unless there is a new release...
I can't throw away any items!!! help me, please
It's disabled in ricarten town and I dont know how to change that but it works everywhere else for me
ok, me too, thks broQuote:
Originally Posted by EvilDan
https://imgur.com/a/7etAInM
can u help me :love:
I'm not sure but I think there is something special with the NPC Ahin. I used Nadia-Removed to make my premium shop and I don't have this message
Ahin is a special NPC that should appear in SOD to offer some items for sale, I dont really know how it works
- - - Updated - - -
I think thoses files are not in a 100% clean state, it seems a few things have been modified before release. Like the Arin npc in navisco selling pots, I dont think it should be there. Same thing for the sheltom peddler in pillai. I also found that a few monsters of secret lab have an incorrect defence and hp, they must have been lowered by someone to do a quest faster. Anyway, nothing too hard to fix :)
Quote:
Originally Posted by EvilDan
I tried changing another npc and that message is gone, thank you very much
Quote:
Originally Posted by snoxl2010
Remove this line
https://i.imgur.com/zBlkJ9z.png
So it's here, thank u very much, SunnyZ :D
@SunnyZ I can't invite another char in my clan, I get an unknown error (54). Can you help me fix that ?
Well, I think I found the solution myself by messing in the clanInsertClanWon.asp.
The IDX field was inserted with the same value as an existing row in UL so I fixed it by using a "select max(IDX) + 1 from UL"
Now i'm having clan error 19 when I expel a char from clan. I had a look in clanWonRelease.asp and it seems those lines are not working.
userid = Trim(Request("userid"))
gserver = Trim(Request("gserver"))
chname = Trim(Request("chname"))
clName = Trim(Request("clName"))
clwon1 = Trim(Request("clwon1"))
ticket = Trim(Request("ticket"))
If I force a value in those variables, its works but I don't know how to fix properly.
Any advice ?
I can't apply the damage because the defense is higher
help me how to fix
Good day, i have downloaded the files but I cant make it work. Can someone please make a tutorial on how to make it work. I am a noob but I love to play this game. Thank you in advance.
there are plenty of guides on this forum.Quote:
Originally Posted by bloodykeith
@insania chat to Olivia in discord, she found the damage / def / abs caps already but has yet to share it with everyone else.
Thank you for the replyQuote:
Originally Posted by Phatkone
Hello, i have a little Problem!
I cant connect between VirtualBox and Windows 10 as client.
Is there a problem using Windows10 as client and Windows7 as Server?
I tried to search, but always no results O.o
thanks in advance =)
Do you mean like server and client connect or a remote connect? Also are you trying to connecting via a forwarded ip, hamachi or some other method?Quote:
Originally Posted by Sumomo
I think with IP. I Tried many VirtualBox Pt-Servers. But the Client cant connect. I had some PT-Servers running bevore. But never Windows10 as Client. =)
try turn off firewall from vmQuote:
Originally Posted by Sumomo
seems that the link:https://pt.kilroy.com.au/ doesn't work...Quote:
Originally Posted by Phatkone
I have a copy of the dll generator here: EuphoriA's Workshop | SQL GeneratorQuote:
Originally Posted by yjbytyx
thx，sunnyz~~~~~Quote:
Originally Posted by SunnyZ
Sorry doing renos at home so servers are turned off for another week.
@SunnyZ remind me to send you the updated ones that have the option for sod2recbysandurr vs sod2record%d%d table
@SunnyZ remind me to send you the updated ones that have the option for sod2recbysandurr vs sod2record%d%d table
Hi @Phatkone,Quote:
Originally Posted by Phatkone
Could you give exact what guide (link) that can work with EPT3215, I found a lot of guide but they are very different
hi
Offset limits, give me a fix
What?Quote:
Originally Posted by oshowo
example)
Offset limits
005D6EAA Defense
005D6EB6 Abs
005D6EC2 Atk
If someone post a guide to find them, I'll try and post the addresses
what about them?
- - - Updated - - -
i found what looks like two different sets of offsets on server side:
Code:005D565A 81B8 FC000000 98>CMP DWORD PTR DS:[EAX+FC],3A98
005D4B64 7D 20 JGE SHORT server10.005D4B86
005D4B66 81B8 04010000 90>CMP DWORD PTR DS:[EAX+104],190
005D4B70 7D 14 JGE SHORT server10.005D4B86
005D4B72 81B8 EC000000 D0>CMP DWORD PTR DS:[EAX+EC],7D0
005D4B7C 7D 08 JGE SHORT server10.005D4B86
005D4B7E 398E 208C0000 CMP DWORD PTR DS:[ESI+8C20],ECX
005D4B84 74 5D JE SHORT server10.005D4BE3
005D4B86 8D86 208C0000 LEA EAX,DWORD PTR DS:[ESI+8C20]
005D4B8C 3908 CMP DWORD PTR DS:[EAX],ECX
005D4B8E 74 11 JE SHORT server10.005D4BA1
005D4B90 C745 D0 D0070000 MOV DWORD PTR SS:[EBP-30],7D0
And found these comparisons for 10000 (defence limit?)Code:005D565A 81B8 FC000000 98>CMP DWORD PTR DS:[EAX+FC],3A98
005D5664 7D 20 JGE SHORT server10.005D5686
005D5666 81B8 04010000 90>CMP DWORD PTR DS:[EAX+104],190
005D5670 7D 14 JGE SHORT server10.005D5686
005D5672 81B8 EC000000 D0>CMP DWORD PTR DS:[EAX+EC],7D0
005D567C 7D 08 JGE SHORT server10.005D5686
005D567E 398E 208C0000 CMP DWORD PTR DS:[ESI+8C20],ECX
005D5684 74 5D JE SHORT server10.005D56E3
005D5686 8D86 208C0000 LEA EAX,DWORD PTR DS:[ESI+8C20]
005D568C 3908 CMP DWORD PTR DS:[EAX],ECX
005D568E 74 11 JE SHORT server10.005D56A1
005D5690 C745 D0 D0070000 MOV DWORD PTR SS:[EBP-30],7D0
005D5697 894D D4 MOV DWORD PTR SS:[EBP-2C],ECX
Code:004CB174 81B8 90FEFFFF 10>CMP DWORD PTR DS:[EAX-170],2710
004CB1A4 81B8 90FEFFFF 10>CMP DWORD PTR DS:[EAX-170],2710
004CB1D4 81B8 90FEFFFF 10>CMP DWORD PTR DS:[EAX-170],2710
Where can i set the database connection?
Same place as always.Quote:
Originally Posted by Lujnar
Sql.dll
THX and sorry for the dumb questionQuote:
Originally Posted by Phatkone
Thanks Phatkone^_^
The game closes itself as soon as I enter the game. (This take 3 seconds on average). Can anyone help?
Look up DEP (Data Execution Prevention) and disable it.Quote:
Originally Posted by Lujnar
Thanks again! *.*Quote:
Originally Posted by SunnyZ
So just confirming. I have tested these and the values, 15k defence, 2k attack (character max) and 400 Absorb
So;
Defence cap: 005d565a
Abs cap: 005d5666
Atk cap: 005d5672
[CODE]
005D565A 81B8 FC000000 98>CMP DWORD PTR DS:[EAX+FC],3A98 <!-- Defence
005D4B64 7D 20 JGE SHORT server10.005D4B86
005D4B66 81B8 04010000 90>CMP DWORD PTR DS:[EAX+104],190 <!-- Absorb
005D4B70 7D 14 JGE SHORT server10.005D4B86
005D4B72 81B8 EC000000 D0>CMP DWORD PTR DS:[EAX+EC],7D0 <!-- Max Atk
005D4B7C 7D 08 JGE SHORT server10.005D4B86
005D4B7E 398E 208C0000 CMP DWORD PTR DS:[ESI+8C20],ECX
005D4B84 74 5D JE SHORT server10.005D4BE3
005D4B86 8D86 208C0000 LEA EAX,DWORD PTR DS:[ESI+8C20]
005D4B8C 3908 CMP DWORD PTR DS:[EAX],ECX
005D4B8E 74 11 JE SHORT server10.005D4BA1
005D4B90 C745 D0 D0070000 MOV DWORD PTR SS:[EBP-30],7D0
[CODE]
Hey Phatkone, what about the aging system? has a lot of failure chance, is possible to modify it on olly? Because on oldest versions we could change easily via Hex, but newer versions we can't.
Thanks again for these addresses provided.
Hi,
Thanks heaps for sharing this, its much appreciated.
I haven't played with this stuff for ages. I've used the virtual box years ago and I just tested that and it still works. Can i just simply drop the server files in that or is there something special i need to do?
Thanks
Rob
Yep, copy/paste server files, get fresh sql.dll, edit hotuk IP's, you're good to go on any old vm that has sql database setup and working account registration website etc.Quote:
Originally Posted by caesar007
If anyone knows the failure rate it will give me an idea for what to look for, but i believe there are multiple tables to make for the various stones (elder, aging, super aging etc)Quote:
Originally Posted by jeanpm
All I could find on BR forums is this old table, if interest you :tee:
+1 0% 0
+2 0% 0
+3 0% 0
+4 0% 0
+5 0% 0
+6 0% 0
+7 0% 0
+8 0% 0
+9 0% 0
+10 25% 19
+11 30% 1E
+12 35% 23
+13 40% 28
+14 45% 2D
+15 50% 32
+16 55% 37
+17 60% 3C
+18 65% 41
+19 70% 46
+20 80% 50
On old method, we search on hex values "00 00 00 00 00 00 00 00 00 00 00 00 0F 00 00 00 14 00 00 00 19 00 00 00 1E 00 00 00 23 00 00 00"
And that was the table without aging stone, but today have several tables, so for anyone who wants to try, good luck!
@Edit: I also remember that some guys said that the way to find the table isn't looking for the failure chances, but where is the table referenced. Don't know if that helps, maybe :fanny:
cheers, i'll try my luck with those values,Quote:
Originally Posted by jeanpm
as for the other note, i wouldnt know where to look for the references to begin with haha
Thanks,Quote:
Originally Posted by SunnyZ
excuse my ignorance, I can't find the sql.dll file on the current server or anywhere.... can you point me in the right direction?
Cheers
Yeah, becaue they are unique to the computer the server is being hosted on. Generate a fresh sql.dll here: EuphoriA's Workshop | SQL GeneratorQuote:
Originally Posted by caesar007
Thanks to Phatkone
Hi:ê°ê¸´ 눈:
Where do I go to change these values? Still pretty new to this all.Quote:
Originally Posted by Phatkone
How to use the GM account? Should I have some special patch? The GMgame.exe does nothing, only open and close.
I solved the question. The problem was Windows 10 64 bit. Works fine with Windows 7 32 bitQuote:
Originally Posted by gas980
Nothing wrong with win10 64bit. turn off DEP and also make sure windows isnt blocking the program (right click -> properties, first page has a checkbox about blocking it if its blocked)Quote:
Originally Posted by gas980
Hi
energy regeneration
life regeneration
muscular regeneration
offset limit
by any chance
Do you know the code?
Thanks! I needed to delete some Assa text files after disabling DEP on Windows 10 64 bit. I tested it and also works without disabling DEP on Windows 10 32 bit.Quote:
Originally Posted by Phatkone
why in gods name would you run 32bit in 2020?
I use it in Virtual Machines only to test old games like Priston. Most of the time, I only use Linux, and I don't feel comfortable with dual boot. When gaming in the Brazilian Priston server, I observe fewer Disconnects in 32bit VMs.Quote:
Originally Posted by Phatkone
Hi :)
anyone have a tuto to setup the server ?
Thanks
does this file have a coin shop?can someone send me sql files please
You will need to build such a system yourself.Quote:
Originally Posted by Rafaelfuinha
Cash shop is website based, can use sql to list out all your items you want in a cash shop.
Then you just send items to a correctly labled text file in postbox folder in your server folder.
Plenty of information on that posted here.
https://forum.ragezone.com/f286/postbox-folder-1171997/
how do I see the user table?
user accounts are in accountdb.dbo.allgameuser or accountdb.dbo.{X}gameuser where {X} is the first letter of the account nameQuote:
Originally Posted by Rafaelfuinha
the character files are in userdata folder as binary files, you'll need a parser like my charlist tool to pump that data into a database to view the information in them
OI can help me I searched for the endresses within Game.exe and Serve.exe of the skills and I didn’t think I could tell all the skills ’addresses if possible in DMGExample Silraphim delai 5 sec leaves 1 sec
how to open the event Crystal
i edited the hotuk file
*EVENT_CRISTAL
but it doesn't work
thks all
Pretty sure *EVENT_CRISTAL is to turn normal monster spawning crystals (hopy, hobgoblin, decoy, bargon) etc into their boss counterparts.Quote:
Originally Posted by snoxl11
If it doesn't work out the gate, might need to add a number after it, normally it 1 or 2
*EVENT_CRISTAL 1
*EVENT_CRISTAL 2
- - - Updated - - -
Yeah
*EVENT_CRISTAL 1
Will enable all monster crystals to spawn their boss variant.
https://i.imgur.com/Abiik2A.jpg
https://i.imgur.com/RwqCh22.jpg
Quote:
Originally Posted by jeanpm
on this server.exe the aging tables are the following:
004E2386 |. 8975 18 MOV DWORD PTR SS:[EBP+18],ESI ; Table1
004E2719 |. 8955 20 MOV DWORD PTR SS:[EBP+20],EDX ; Table2
004E2858 |. 8975 18 MOV DWORD PTR SS:[EBP+18],ESI ; Table3
004E298C |. 894D 18 MOV DWORD PTR SS:[EBP+18],ECX ; Table4
004E2AE6 |. 894D 18 MOV DWORD PTR SS:[EBP+18],ECX ; Table5 (table for no stone)
and certainly there you can see the sequence of data expected.
also seems the diferent tables are used based on wich stone you used.
btw, location of this table infered from the "same" location from process in server that we have sources, and using by lookup reference the constant for aging stone 80B0A00 aka "sinBI1|sin10"
someone can make available the tutorial to install this server, if possible with client and website.
very ty all
Explore all the pages about pristontale serverQuote:
Originally Posted by darthloud
Can anyone reup the link on another host?
The original Mega link is still working fine.Quote:
Originally Posted by blurpi
I tried to find and change the aging chances using these table addresses, but I didn't find the expected data (the age rate percent value to change). Is there any extra step needed to do? I'm using OllyDbg.Quote:
Originally Posted by telatoro
If you have any tutorial or clue about how I can do it, would be very appreciated. Thanks!
Can't the character name use other languages?
Hello, I have a few questions.
1)Can't the character name use other languages?
2) Monsters do not appear in ardo and bellatra.
3) Monsters do not appear in Ghost Castle and Lizard Swamp.
4) Can't add kpt New monster, npc (server won't turn on)
5) Adding kpt tmABCD will change the character's movement shape.
thank you
thanks for your https ,if it has a https for CHN may be batter
You can contact me if still want a solution. The issue is from clanWonRelease.asp:Quote:
Originally Posted by EvilDan
clwon1 = Trim(Request("clwon1"))
ticket = Trim(Request("ticket"))
This is the best Classic repack available on RZ and should be pinned. ZeroPT has a major advantage being open sourced with the code available, but this simply has the best features available. It's running in a clean state. Tested and verified to work very nicely!
any one here know what file should i edit to change characters attacks damages power?
You cannot enter Bless Castle.
How can I get in?????
Likarten and Philai can go to any area.
but
The portal to Bless Castle won't open.
Make sure this line is in the servers hotuk
*EVENT_BITMASK 32
*EVENT_BLESSCASTLE
*EVENT_SIEGE_TIME 4 23
Specifically "*EVENT_BITMASK 32" enables the NPC in bamboo forest to send you to BC
to expand on SunnyZ's comment, make sure there is a flag somewhere in the BC castle area, otherwise the guards etc won't spawn.
Energy
Muscle
Life
regenerative power
Does anyone know the maximum offset value?
I don't know about these.