[problem] hosting ran online classic ep7 4 class

Good Day Ragezoners!

I have configured all the files, my servers(LOGIN, FIELD, AGENT, SESSION) are running, I have already port forwarded all ports in cfg, allow all the ports on my firewall, and updated my param.ini file (I used my WAN IP). I tried to test my client on Virtual Machine, it runs, no errors if I used LAN IP on my param.ini, but when I use my WAN IP on param.ini, it has error is says "Internet Connection Error, Do you want to quit RAN?".

I tried also to test my client with the WAN IP on param.ini, using other PC not connected to the same network I used with my server, it allows me to choose server and channel( I have only one server and channel), but when I clicked the Connect button, it says "Server Connection Failed"..

Please help me guys, I badly need your help :(

Thanks a lot in advance and more power Ragezoners!

You can use canyouseeme.org to check if you have successfully opened the ports.

You can also check your CFG ports.

- - - Updated - - -

Quote:

---

Originally Posted by lars

You can use canyouseeme.org to check if you have successfully opened the ports.

You can also check your CFG ports.

---

yes sir, it is all open now sir.. when i select channel it always says that "Server Connection Failed". Please help me :(

Does the server source come with logs in the data folder or anything like that, which can display the error itself or the conflict?

https://drive.google.com/open?id=1CI...ha64sIjm4V3PKv

I have here the video of my problem sir :(

The messages are too blurry to see, but is there any other specific message other then “connection failed”. I’m also wondering whether you can open ‘Task Manager’ to see whether you’ve got anything else using those specific ports?

what ports is it using?

Quote:

---

Originally Posted by Bradley

Does the server source come with logs in the data folder or anything like that, which can display the error itself or the conflict?

---

As i check here on my source code sir, I dont see any error logs here :(

Alright but can you do the following.

1) What ports is your server using?
2) Close the server down
3) open task manager and see If anything is using these ports

Quote:

---

Originally Posted by Bradley

The messages are too blurry to see, but is there any other specific message other then “connection failed”. I’m also wondering whether you can open ‘Task Manager’ to see whether you’ve got anything else using those specific ports?

what ports is it using?

---

the ports i used on my cfg sir are those available ports

5001,5002,5003, 5109

Can you check If all of these ports are open as well open task manager and see If any other service is using these?

Quote:

---

Originally Posted by Bradley

Alright but can you do the following.

1) What ports is your server using?
2) Close the server down
3) open task manager and see If anything is using these ports

---

Is PID and ports are the same sir?
As I check here on my task manager sir, it does not show the ports here but I have the PID

ServerName PID
Session 3280
Login 3400
Field 5708
Agent 8928

@arwekaj09

Can you open your CMD and run the following commands

Quote:

---

netstat -aon | findstr '[port_number]'

---

Do this with each individual ports that your server is processing/using, and once this is done: feel free to send it back as a reply.

Quote:

---

Originally Posted by Bradley

@arwekaj09

Can you open your CMD and run the following commands



Do this with each individual ports that your server is processing/using, and once this is done: feel free to send it back as a reply.

---

@Bradley
https://firebasestorage.googleapis.c...5-220782310bee

- - - Updated - - -

did you check if the login port in netclient and in your login cfg is the same?

Quote:

---

Originally Posted by Mustafa5

did you check if the login port in netclient and in your login cfg is the same?

---

my login cfg and server login ports are the same sir..