help !!!! now only active 101 serverNo.
Printable View
help !!!! now only active 101 serverNo.
For Emulator (Archer/Guardian) or Commercial server?
The below is for commercial (Leaked) Nova and Corsair servers:
If you want to have 2 servers running on the same box, you will need 2 virtual machines to run them in. Each VM multiplies the hardware requirements by the space needed for each server. I really hope you have a big enough PC to run all that. I suspect about 180GB per Field server.
I am not sure if you need separate Auth and Manager servers, but you will definitely need a second Field server.
I push the memory limits on my system with this (I run a 32/64 core/thread AMD Threadripper with 256GB memory) and I only have a single Normal (non-season/Hadum) server running.
thanks for your reply,i used corsair server. i copy a feild server folder named feild2. how to do active other serverNo (change datasheet_server.xlsm)?
solved!
but mem [COLOR=rgba(0, 0, 0, 0.87)]not enough.......[/COLOR]
Can you share pls how did you make it on corsair server both servers to work hadum and season?Quote:
Originally Posted by wahaha
it takes double size of RAMs? isnt it?
for each server (normal, Hadum, Season) you need a folder for a copy of the field server. Each field server requires about 128GB Plus another 120gb of swap space. So if you want to run both season and field servers you will need 256gb + 240gb swap space. To add in a Hadum server add another 128gb + 120gb to that. I can tell you now that there are very few non-server computers that support over 256GB physical memory.Quote:
Originally Posted by versacebg
I would recommend you run each field server in a separate PC or virtual machine so each can have a different IP address. The Auth and Manager servers will go on one of those field servers as long as that IP address is known in the game client service.ini. You will need to set that IP address in the datasheet_server.xlsm of each server so they are all in sync.
I knew that to manage du CH in the same machine needed to have two Network cards for that the server requires two semparate Mac adress is it possible to perform that function even with only one network card ?Quote:
Originally Posted by The Sourcerer
for example i got a server with 256gb ram and 500gb ssd my manager can't physically add me another network card coem do i run a second CH inside the machine for that i tried to configure the same IP and Mac in the datasheet_server but when i start the server the second channel i see it but in maintenance and i don't m ifa access thank you
I Described how to run two or more Channels on the same machine with the same IP/Mac combination in another thread and it works perfectly fine.
You need one DataSheet-Server that has the whole configuration as you want it in there for example with season and normal channel order does not matter just take serverNo's that are close to each other.
Here is a link to the post. If you need more instructions just ask^^
https://forum.ragezone.com/f1000/cor...6/#post9146686
https://forum.ragezone.com/f1000/cor...1/#post9146691
Link one explains how i got it working, link 2 has example Excel Sheets
I missed that post thanksQuote:
Originally Posted by seramyu
i have try whit your server config Calpheon 1 is ok when enter to serendia 2 i have this is errorQuote:
Originally Posted by seramyu
- - - Updated - - -
Whent eneter on Season CH is ok when enter to Normale Ch serendia 1 i recive this is error
https://i.ibb.co/Yd2sCGr/dev.jpg
https://forum.ragezone.com/image/png...BJRU5ErkJggg==
Problem solved ihave change info _startSiegeTerritory -2 and change ch worek normaly