Image Guide to Port Forwarding

results may vary as all routers are NOT the same
step 1
hhttp://img258.imageshack.us/img258/5442/step1ht6.jpg
step 2
http://img170.imageshack.us/img170/9615/step2bn2.jpg
step 3
http://img170.imageshack.us/img170/2530/step3in3.jpg
step 4
http://img234.imageshack.us/img234/9289/step4nd3.jpg
step 5
http://img234.imageshack.us/img234/6158/step5kk6.jpg
step 6
http://img234.imageshack.us/img234/3208/step6to4.jpg
step 7
http://img406.imageshack.us/img406/6383/step7uz3.jpg
step 8
http://img217.imageshack.us/img217/2853/step8yu2.jpg
step 9
http://img217.imageshack.us/img217/594/step9ug8.jpg

credits- MasterShake

very nice, straightforward and thorough. i know many people will benefit from this.

HOWEVER: what i try to forward 51211 to 51213, this happens:

http://img244.imageshack.us/img244/6...wardingud9.jpg

i know what the problem is.

instead of opening 51211 to 51213 AND 51213 to 51215

you need to open 51211 to 51215 because 51213 was in there twice, some routers let it work, others dont.

good luck :)

it doesn't work. i tried that, but instead, i get login server connect fail or some ranking server related error.

this configuration gives me no errors except the joinserver one:

http://i15.tinypic.com/6h7lnuq.jpg

and ports cannot be there twice. any help?

are you sure the last three numbers in your local ip are 100 and not 101 or 102
?

http://i7.tinypic.com/6cykl03.jpg

i cant argue with that lol.

im not sure what the problem is >.<

How do I get port forwarding with a D-Link router?

on most routers, there is a small button in the back of the router(if not, look for it on the router)

just press and hold it for 30 seconds

then your info will be

Username: *leave this blank*
pass: admin

good luck :D

Quote:

---

Originally Posted by Picadilly

How do I get port forwarding with a D-Link router?

---

Sorry :P I just edited the post ;) I need to know how to port forward for this here example :)

I don't know how to PF with a D-Link

maybe if i resetted my router do you think it could work?

it might

and picadilly,most routers are the same, it could be worded differently than Applications and gaming, but its generally the same setup

Nice guide there Congrats

<--- Off Topic ---> Vista lolz

*snaps fingers*

i think i know what's wrong! maybe its the fact that my network is secured.
maybe it would work if i unsecured it.

--------------------------------------------------------------------------

EDIT: nope, i am 100% sure now that it is not a port/ip problem...

maybe i should stop using forever faulty guide and use yours.

*tries that* await edit to see if works.

Quote:

---

Originally Posted by Nightwing7

Nice guide there Congrats

<--- Off Topic ---> Vista lolz

---

thank you, and it is, thats why i dont have my own server :P

Quote:

---

Originally Posted by lothera

*snaps fingers*

i think i know what's wrong! maybe its the fact that my network is secured.
maybe it would work if i unsecured it.

--------------------------------------------------------------------------

EDIT: nope, i am 100% sure now that it is not a port/ip problem...

maybe i should stop using forever faulty guide and use yours.

*tries that* await edit to see if works.

---

i thought you have been using my guide, thats why i was confused :P im not sure what his guide contains, ive never looked at it

Quote:

---

Originally Posted by MasterShake

it might

and picadilly,most routers are the same, it could be worded differently than Applications and gaming, but its generally the same setup

---

The only remotely close thing I have is the Firewall obtion...

well mastershake, his guide is basically an exact copy except with different server files and different instructions regarding ips :P

i figured that much, he saw the success of mine and wanted to be popular :P

picadilly, printscreen FTW :P

that way i can see the problem

http://img373.imageshack.us/img373/1706/dlinkgc0.jpg
If you need more info, let me know!

Quote:

---

Originally Posted by Picadilly

The only remotely close thing I have is the Firewall obtion...

---

theres a button right there that says "APPLICATIONS"

thats extremely close to applications and gaming, use send me a screen of the applications page

http://img363.imageshack.us/img363/6228/dlinkbc2.jpg

There you are :)

lol mastershake it works now :D thanks for everything


(i went throu the guide one last time, and triple checked everything, still dont know what was wrong but it works lol so who cares :P) anyways, see ya :D

great job lethera, and good luck with your MU

also, picadilly, i edited the picture to tell you what to do with it

http://img101.imageshack.us/img101/7105/dlinkbc2on7.jpg

Thanks for the help!

I just don't know which ports to open for my Habbo Hotel retro... :P If anyone can help me, let me know!

ok i need some help. i don't know what the username and pass is for my default gateway. i followed your steps and nothing happens. then i press and hold the button for 30 seconds and nothing. i tried again for like 3 mins and nothing. what can i do now?. and i have anothere prob (bit off toppic sorry). ok i can't get a sollution for this. i have a 1.02n server files (HasteMu) and in the readme it says i have to change ip in these links that look like mains. i tried editing them with main edditor but the program will just terminate. any idea's?
thx for your help

~Chris12~

Quote:

---

Originally Posted by MasterShake

on most routers, there is a small button in the back of the router(if not, look for it on the router)

just press and hold it for 30 seconds

then your info will be

Username: *leave this blank*
pass: admin

good luck :D

---

What button? the on/off button

Or the Reset button?

sorry for doubble post i don't know why that happened

very good guide but u can also go here (and ur guide u shown only 1 router):
http://portforward.com/english/route...outerindex.htm
but instead of the ports that is says u forward the ports u want
BTW 10/10

Great, easy to follow guide. It will help a lot of people.

Caution to those who don't understand port forwarding - it's opening your pc up to attack by would-be hackers. only open ports you NEED, not ranges, and NOT DATASERVER PORTS - this will help you in long run.

GL all, and 10/10 on guide!!

Quote:

---

Originally Posted by darkness4

very good guide but u can also go here (and ur guide u shown only 1 router):
PortForward.com - Free Help Setting up Your Router or Firewall
but instead of the ports that is says u forward the ports u want
BTW 10/10

---

if people need help with other routers, i can help them, its not like i only know how to forward ports on MY router

Quote:

---

Originally Posted by TheJAZZman

Great, easy to follow guide. It will help a lot of people.

Caution to those who don't understand port forwarding - it's opening your pc up to attack by would-be hackers. only open ports you NEED, not ranges, and NOT DATASERVER PORTS - this will help you in long run.

GL all, and 10/10 on guide!!

---

thank you ;)

umm.... does this work if youve got a single adsl modem?..lol

if you dont have a router, you dont need to port forward :P

ohhh.....lol man how the hell do you know all these stuff? Guess Ive fallen behind time... anyway once again thanks! Im following your guide right now and hope I wont have any problems with it...(crosses finger)..
:)

maybe your old :P

lol, sorry, but good luck, and if you have any questions feel free to pm me or post in the thread :D

thank you for your guide, it worked perfectly! i cant believe im playing this! wooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo im quitting job now screw it

When I open Windows Task Manager, and then search for cmd, the popup comes up, but theres none of the info in at liek shown in the pic. als thats in the pop up is:
Microsoft Windows XP [Version 5.1.2600]
<C> Copyright 1985-2001 Microsof Corp.

C:/Documents and Setting\HP_Aministrator>_

and thats it, none of that default gateway stuff

hey i dunno how to forward ports i kow how to get into my router web page ill give u a picture ! can u pls tell me what to do or edit it or something like with picaddillys pic! ----->>> http://i15.tinypic.com/4qnyzqh.jpg

Page cannot be displayed..wtf is that?

my local ip is 192.168.1.101 and gateway is 192.168.1.1 and my mdl is WRT54G and i cant get to linksys i wrote admin at the password and it tells me that the pass is incorrect can any1 help me?

sry 4 double post i pressed the button twice =[

nice guide so good :D

Something a lot easier is to turn on DMZ and point it to your computer instead of forwarding individual ports. Just get a firewall to block what you don't want. Thats what I do.

can any1 help me? i found a program that allows mre to forward ports but i dunno how
http://i160.photobucket.com/albums/t192/iots09/dddd.jpg

Hey guys,

I figured out that the problem is not in my router but in my modem.
The idiots at AT&T thought it would be nice to screw with me and
make a firmware update, and Add NAT/Gaming to their modem options,
which I see no need in since there are no ports blocked anyways.
Anywho,... Point is I need help! I did IPpassthrough and whatnot and I
have not been able to get my server online!!! at all... its weird. I have no router
on right now. and I can play on my WAN IP (Global IP) Localy, but my freinds cannot connect to me!

WTF is going on!!!?

Can someone please help?

this needs to be a sticky since even AFTER this guide i still see people asking
"what is port forward"
"i dont know how to port forward help pls"
"i did everything, but dont get the port forward part"

:)

I have a problem:

ive port forwarded and my LAN ip address is 192.168.2.1

is this the ip i put in my loader as i have already made the things i need to make but ive loaded my loader with this ip and the sulake bit loads nearly all the way, and then goes blank, please help

here is the problem: NOT EVERYONE HAS THE SAME ROUTER...

so it may be different for most ppl >.<

yep tats the problem:not the same router type

best thing for every1 to get a static ip(i soon will get 1) and end the Port forwarding War:biggrin:

Hee Hee I think i acidently portforwarded

Quote:

---

Originally Posted by Picadilly

Thanks for the help!

I just don't know which ports to open for my Habbo Hotel retro... :P If anyone can help me, let me know!

---

Habbo retros are generally run on "port 90"

HI im not sure how to forward ports for my router, since it doesnt say start to end.. ill send a pic of my router config page:

http://img518.imageshack.us/img518/5120/port1189oq1.png

Quote:

---

Originally Posted by .YourName

i know what the problem is.

instead of opening 51211 to 51213 AND 51213 to 51215

you need to open 51211 to 51215 because 51213 was in there twice, some routers let it work, others dont.

good luck :)

---

Hey , Whats This Portforward ing For ? As In Habbo,World Of Warcraft Whatever , Im tryig to portforward for habbo.

http://img340.imageshack.us/img340/9469/10957128zl8.jpg

If it`s right, then I am confused couse no1 can connect to myserver....


EDIT:

http://img507.imageshack.us/img507/8925/22810084wa4.jpg

This is the Port Forwading Menu....

http://img183.imageshack.us/img183/8350/29342367zt1.jpg

Maybe this is what I need? and how to configure it if it is


I am stucked :sq_yellow

@guide... it is not needed to open some useless port like opening prot 79... 81... you can just do...

80 to 80
44405 to 44405
55901 to 55903

@baraev: check the ports if they are already open... if no then there must be something wrong with the settings...
i saw some port error in your image router... some ports are having conflicts...

Where excatly is the error?

Quote:

---

Originally Posted by baraev

Where excatly is the error?

---

In the launcher is it your Local ip or you wan ip you are using ??

Your local is; 192.168.0.101
wan ip; Your IP: 208.116.34.18

Its my WAN IP in the Launcher