[Antrix] I have a error in antrix.exe

Cud sombdy say me what i am doing wrong ?
http://img528.imageshack.us/img528/3...tledzx6.th.jpg

This screen doesn't say that much.
Post your conf files, core rev, database used... please :)

I fixed thet error but i got a new when tryed to run it online
here are my configs

antrix

Code:

---

#######################################################################
# Antrix Configuration File
# Last updated at revision 236
#######################################################################

# Database Section
#
#  Database.Host      - The hostname that the database is located on
#  Database.Username  - The username used for the mysql connection
#  Database.Password  - The password used for the mysql connection
#  Database.Name      - The database name
#  Database.Port      - Port that MySQL listens on. Usually 3306.
#  Database.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

Database.Hostname      = localhost
Database.Username      = root
Database.Password      = 456987
Database.Name          = antrix
Database.Port          = 3306
Database.Type          = 1


# Host Directive
#
#    This is the address that the server will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#

Host = 0.0.0.0


# World Server Listen Port Directive
#
#    This is the port that the world server listens on.
#    It has to be the same as what is specified in the
#    realms table in the LogonDatabase.
#    Default: 8129
#

WorldServerPort = 8129


# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none, or -1 to disable.
#    -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

LogLevel.Screen = 0
LogLevel.File = -1


# World server packet logging feature
#
#    If this directive is turned on, a file called `world.log`
#    will be created in the server's directory and all packets
#    sent and received by clients will be dumped here in bfg
#    format.
#    Default: 0
#

LogWorld = 0


# Session Limit
#
#    This directive controls the amount of sessions that will be
#    accepted by the server before it starts to add people to
#    the server queue.
#    Default: 100
#

PlayerLimit = 100


# Message Of The Day (MOTD)
#
#    This message will be displayed by the server in the chat
#    box every time any user logs on. Colors can be used in the
#    standard WoW format.
#    Default: "No MOTD specified"

Motd = "No MOTD specified."


# Send Build On Join
#
#    This directive controls whether the server's internal revision
#    will be sent to clients upon entering the world. Use it to help
#    testers report bugs.

SendBuildOnJoin = 1


# Send Stats On Join
#
#    This directive controls whether the server will send the online player
#    count to a cilent when it enters the world.

SendStatsOnJoin = 1


# Power regeneration multiplier setup
#
#    These directives set up the multiplier in which regen values will be
#    multiplied by every 2 seconds.
#    Powers:
#        Power1 = Mana, Power2 = Rage, Power3 = Energy
#   
#    Reputation:
#        Kill = Rep gained on kill, Quest = rep gained from quests
#
#    Honor:
#        Honor = multiplier used to calculate honor per-kill.
#
#    PvP:
#        PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)

Rate.Health = 1
Rate.Power1 = 1
Rate.Power2 = 1
Rate.Power3 = 1
Rate.QuestReputation = 1
Rate.KillReputation = 1
Rate.Honor = 1
Rate.PvPTimer = 300000


# XP (Experience) Rate setup
#
#  The xp that a player receives from killing a creature will be multiplied
#  by this value in order to get his xp gain.
#  Default: 1
#

Rate.XP = 1
Rate.QuestXP = 1


# Rest XP Rate
#
#  Value is the amount of rest XP a player will recieve per minute of rest time.
#  Default: 1
#

Rate.RestXP = 1


# Drop Rate
#
#  This value will be multiplied by any gold looted and the drop percentages of the
#  items for creatures will also be multiplied for this to determine which items
#  to drop.
#  Default: 1
#

Rate.Drop = 1
Rate.DropMoney = 1


# Player save rate
#
#  Value in milliseconds (ms) that will be between player autosaves.
#  Default: 300000 (5 minutes)

Rate.Save = 300000

# Compression rate
#
#  Value is from 1-9, the compression level passed to zlib to compress
#  update packets. A higher value will consume less bandwidth but more cpu cycles.
#  Default: 1 (Best Speed)
#

Rate.Compression = 1


# Queue Update Rate
#
#  This directive controls how many milliseconds (ms) between the updates
#  that the queued players receieve telling them their position in the queue.
#  Default: 5000 (5 seconds).
#

Network.QueueUpdateInterval = 5000


# Update Distance
#
#  This directive controls the distance (internal yards) that the player can "see" up to
#  and receieve updates for. For smaller servers, you can probably increase this number.
#  Increasing this number will also increase the servers bandwidth consumption and CPU usage.
#  Default: 80
#

PlrUpdateDistance = 80


# Level Cap
#
#  This variable controls the level that stats will be generated up to internally.
#  Beyond this level players can still see a higher level visually but their stats won't
#  increase beyond this point.
#

LevelCap = 70


# GM Client Channel
#
#  This should be set to 'gm_sync_channel' for the My_Master addon to work.
#
#  Default: gm_sync_channel
#

GmClientChannel = "gm_sync_channel"


# Seperate Channels Control
#
#  This directive controls whether horde and alliance chats will be seperated across channels.
#  Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
#  across channels.
#
#  Default: 0
#

SeperateChatChannels = 0


# Terrain Configuration
#
#  Set the path to the map_xx.bin files and whether unloading should be enabled for the main world
#  maps here. Unloading the main world maps when they go idle can save a great amount of memory if
#  the cells aren't being activated/idled often. Instance/Non-main maps will not be unloaded ever.
#
#  Default:
#      MapPath = "maps"
#      UnloadMaps = 1
#

MapPath = "maps"
UnloadMaps = 1


# Breathing Setup
#
#  If the breathing code is causing problems or you want to run a fun server, you can disable
#  water checks by enabling this directive.
#
#  Default: 1
#

EnableBreathing = 1


# Speedhack detection
#
#  If this directive is turned on, speedhack detection will be activated and speedhackers
#  will be warned / kicked.
#
#  Default: 0
#

SpeedhackProtection = 0


# Cheat log setup
#
#  These two directives set up the cheater logging file, if turned on any cheat / packet
#  exploit / speedhack attempts will be logged here.
#
#  Default: off
#

LogCheaters = 0


# GM log setup
#
#  These two directives set up the GM command logging fie. If turned on, most gm commands
#  will be logged for this file for abuse investigation, etc.
#
#  Default: off
#

LogGMCommands = 0


# Mail System Setup
#
#  These directives control the limits and behaviour of the ingame mail system.
#  All options must have Mail prefixed before them.
# 
#  ReloadDelay                - Controls the delay at which the database is "refreshed". Use it if you're
#                                inserting mail from an external source, such as a web-based interface.
#                                0 turns it off.
#                                Default: 0
#
#  DisablePostageCostsForGM    - Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
#                                Default: 1
#
#  DisablePostageCosts        - Disables postage costs for all players.
#                                Default: 0
#
#  DisablePostageDelayItems    - Disables the one hour wait time when sending mail with items attached.
#                                Default: 1
#
#  DisableMessageExpiry        - Turns off the 30 day / 3 day after read message expiry time.
#                                WARNING: A mailbox still cannot show more than 50 items at once
#                                (stupid limitation in client).
#                                Default: 0
#
#  EnableInterfactionMail      - Removes the faction limitation for sending mail messages. Applies to all players.
#                                Default: 1
#
#  EnableInterfactionMailForGM - Removes the faction limitation for sending mail messages, but only applies
#                                to GM's. EnableInterfactionMail overrides this.
#                                Default: 1
# 

Mail.ReloadDelay                = 0
Mail.DisablePostageCostsForGM    = 1
Mail.DisablePostageCosts        = 0
Mail.DisablePostageDelayItems    = 1
Mail.DisableMessageExpiry        = 0
Mail.EnableInterfactionMail      = 1
Mail.EnableInterfactionMailForGM = 1


# Compression Threshold
#
#  This directive controls the limit when update packets will be compressed using deflate.
#  For lower-bandwidth servers use a lower value at the cost of cpu time.
#
#  Default: 1000
#

CompressionThreshold = 1000


# Status Dumper Config
#
#  These directives set up the status dumper plugin. Filename is an absolute or relative
#  path to the server binary. Interval is the time that the stats will be dumped to xml.
#
#  Default: stats.xml / 120000 (2 minutes)
#

StatDumper.FileName = "stats.xml"
StatDumper.Interval = 120000


# Connection Timeout
#
#  This directive specifies the amount of seconds that the client will be disconnected
#  after if no ping packet is sent. It is advised to leave it at the default.
#
#  Default: 180
#

ConnectionTimeout = 180


# MapMgr Preloading
#
#    This directive controls whether the entire world will be spawned at server startup
#    or on demand. It is advised to leave it disabled unless you are a developer doing
#    testing.
#
#    Default: off
#

MapMgr.Preloading = 0


# Background Loot Loading
#
#    This directive controls whether loot will be loaded progressively during startup
#    or in the background in a seperate thread. Turning it on will result in much
#    faster startup times.
#
#    Default: on
#

Startup.BackgroundLootLoading = 1


# Multithreaded Startup
#
#    This controls whether the server will spawn multiple worker threads to use for
#    loading the database and starting the server. Turning it on increases the speed
#    at which it starts up for each additional cpu in your computer.
#
#    Default: on
#

Startup.EnableMultithreadedLoading = 1


# Guild Setup
#
#    This directive controls whether the full 10 signatures will be required in order
#    to turn in a petition. Smaller servers would be better off having it turned off.
#
#    Default: off
#

Guild.RequireAllSignatures = 0


# LogonServer Setup
#
#    This directive controls whether pings will be sent to the logonserver to check
#    if the connection is still "alive". Expect problems if it is disabled.
#
#    Default: on
#

DisablePings = 0


# LogonServer Setup
#
#    This directive controls the password used to authenticate with the logonserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_world"
#

LogonServer.RemotePassword = "net"

---

logonserver

Code:

---

#######################################################################
# Antrix Configuration File (Logon)
# Last updated at revision 236
#######################################################################

# LogonDatabase Section
#
#    These directives are the location of the `realms` and `accounts`
#    tables.
#
#    LogonDatabase.Host      - The hostname that the database is located on
#    LogonDatabase.Username  - The username used for the mysql connection
#    LogonDatabase.Password  - The password used for the mysql connection
#    LogonDatabase.Name      - The database name
#    LogonDatabase.Port      - Port that MySQL listens on. Usually 3306.
#    LogonDatabase.Type      - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

LogonDatabase.Hostname = localhost
LogonDatabase.Username = root
LogonDatabase.Password = 456987
LogonDatabase.Name    = antrix
LogonDatabase.Port    = 3306
LogonDatabase.Type    = 1

# Host Directive
#
#    This is the address that the realmlist will listen on.
#    To listen on all addresses, set it to 0.0.0.0
#    Default: 127.0.0.1 (localhost)
#
#    Note: ISHost is the interserver communication listener.
#

Host = 0.0.0.0
ISHost = 0.0.0.0

# Realm List Listen Port Directive
#
#    This is the port that the realm list listens on.
#    Unless you have modded the clients, this will
#    always be 3724.
#
#    Default: 3724
#

RealmListPort = 3724


# Server console logging level
#
#    This directive controls how much output the server will
#    display in it's console. Set to 0 for none.
#    0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
#    Default: 3
#

LogLevel = 0

# Account Refresh Time
#
#    This controls on which time interval accounts gets
#    refreshed. (In seconds)
#    Default = 600
#

AccountRefresh = 600

# Accepted Build Range Setup
#
#    These two directives set up which clients will be
#    allowed to authenticate with the realm list.
#
#    Set these to the same builds that the server was
#    compiled for.
#
#    As of the last update, version 2.1.1 was build 6739.
#

MinClientBuild = 6739
MaxClientBuild = 6739

# WorldServer Setup
#
#    This directive controls the password used to authenticate with the worldserver.
#    It must be the same between the two configs. If it is not, your server will
#    not register.
#
#    Default: "change_me_logon"
#

LogonServer.RemotePassword = "net"

---

realms

Code:

---

#######################################################################
# Realms Configuration File
# Last updated at revision 1259
#######################################################################

# Logon Server Setup
#
# Logon servers are the old "realmlist" or "auth" servers.
# At the moment, you can only set up one. This will be changed in the
# future.
#
# LogonServerCount      = Number of servers
# LogonServer[x].Address = The address (no port) of the server.
# LogonServer[x].Port    = The port on which the logon server listens.
# LogonServer[x].Name    = Not really relavant, but name the logon.
#

LogonServerCount    = 1

LogonServer1.Address = "81.198.69.184"
LogonServer1.Port    = 8093
LogonServer1.Name    = "Default Logon"

# Realm Setup
#
# This is the realms that will be added to the list for this instance
# of the server. You can have multiple realms (e.g. one for LAN, WAN).
#
# RealmCount          = The number of servers.
# Realm[x].Name      = The name of the realm.
# Realm[x].Address    = The address (and port) of that realm.
# Realm[x].Icon      = The type of realm (PVP, Normal, RPPVP, RP)
# Realm[x].Colour    = Realm colour in realm list display.
# Realm[x].TimeZone  = Time zone the realm is in.
# Realm[x].Population = (0 = low, 1 = medium, 2 = high)
#

RealmCount          = 1

Realm1.Name          = "Askta"
Realm1.Address      = "81.198.69.184:8129"
Realm1.Icon          = "PVP"
Realm1.Colour        = 1
Realm1.Population    = 1.0
Realm1.TimeZone      = 1

---

http://img75.imageshack.us/img75/207...led2ct3.th.jpg

realms.conf

LogonServerCount = 1

LogonServer1.Address = "81.198.69.184"
LogonServer1.Port = 8093
LogonServer1.Name = "Default Logon"

change it to

LogonServerCount = 1

LogonServer1.Address = "127.0.0.1"
LogonServer1.Port = 8093
LogonServer1.Name = "Default Logon"

ye i now thet fix thet error but can then other people join my server ?

Yes they can :)