[Video]: Setup a Server [ start --> finish ] in 18 minutes!

name: MU Server Speed Run
description: MU Server Setup from START to FINISH in 18 minutes [ VIDEO ]

Ok i originally made this video as a joke to see how fast i could set up a server, then i realized i could just post it as a guide on RZ ;D so if u need a guide on setting up a 1.2q server then this is for you, also if u already know how to set one up this is kinda entertaining. this video ( also known as a Speedrun - Wikipedia, the free encyclopedia ) shows you can go from nothing even being installed, to your character connected and in lorencia in like 15 minutes ! lol


client & server files: http://forum.ragezone.com/f196/guide-1-2q-full-guide-html-guide-over-73-images-235999/


video: (kinda average quality to make it a smaller file size.. lol my first one was like 2gb.. >_< )
http://files.filefront.com/speedrunavi/;8550260;/f


enjoy,[B]
rolex


p.s. - i know its possible to do it in under the 10 minutes, what do u guys think is the fastest time possible? =D

cool good work

thx man

Cool lol, dunno abt the fastest server install..you know..it depends of computer..like if its a new installed pc it would boot in like 10-20 seconds but then if its an old one with everything installed(video, audio, firewall, antivirus, blah blah)...it takes a lot more

verry good XD tks a lot

verry good XD tks

does this work for router? or just non router support?

Nice Vid. Good Work in Taking the time to make it
Most Appreciated

Quote:

---

Originally Posted by RayOfLight

Cool lol, dunno abt the fastest server install..you know..it depends of computer..like if its a new installed pc it would boot in like 10-20 seconds but then if its an old one with everything installed(video, audio, firewall, antivirus, blah blah)...it takes a lot more

---

yea buddy.. lets say i had a 6 ghz comp.. that would definitely shave off mad minutes lol
different from lets say the SNES cause all of them had the same hardware speed heh

=D

Quote:

---

Originally Posted by komodo

verry good XD tks a lot

---

thx for the comment

Quote:

---

Originally Posted by Jianwei92

does this work for router? or just non router support?

---

well i have a network in my house but i demonstrated this video without it hooked up ( my comp is the server ).. so yea sorry man this was only non-router support >_<

Quote:

---

Originally Posted by rozandas

Nice Vid. Good Work in Taking the time to make it
Most Appreciated

---

wow thx man.. i appreciate your comment buddy

when i used Mu server setup everything says read but then this error msg says after evrything is done Login Server Failed so can some1 help me??

AWSOME! Instead of guides we should get these. Now i dont have any questions :D Good work man!

Quote:

---

Originally Posted by I Rule MU

AWSOME! Instead of guides we should get these. Now i dont have any questions :D Good work man!

---

thx bro glad it helped!.. btw is that your baby? i have a 4 month old daughter ;D

help!!!
my exdb and connectserver cant connect......

help!!!
my exdb and connectserver cant connect
it say error connecting failed....blah2...an cant log in..
it say error #129 when i logged in....

Yay a video guide, Now I can really make a Mu Private server.

Quote:

---

Originally Posted by fire101

when i used Mu server setup everything says read but then this error msg says after evrything is done Login Server Failed so can some1 help me??

---

Quote:

---

Originally Posted by julung

help!!!
my exdb and connectserver cant connect......

---

Quote:

---

Originally Posted by julung

help!!!
my exdb and connectserver cant connect
it say error connecting failed....blah2...an cant log in..
it say error #129 when i logged in....

---

try checking all of your ip's and ports.. if that dont work then post screenshots

Quote:

---

Originally Posted by Ryukoken

Yay a video guide, Now I can really make a Mu Private server.

---

good luck with that buddy ;D

Hello,

With respect to your topic here, I used the same files and tried creating my own server, I believe there are some lacking datas in the server files, coz after much reviewing the IP's and the ports in my server, my connectserver does not have a window like the one you have in the video, and when i run the server it would hang in that part, only after i would maximize the dataservers window, would the connectserver window becomes ready, but still no specific window for it, all others has and are all connected. Then i tried connecting to the client, i got disconnected all the time if i use port 44405. I also tried using port 55901, ican connect to the game but after 60 seconds i would get disconnected. All my ip's are all local coz i want to test it first but still unable to connect. Can you please give me a link to download the client you use as well as the server files. Thank you in advance.

Wow That Is Very Good For Ppl Who Want Make Server Good Work Rolex is Very Good Work Perfect 10/10!

Wow, Thanks. Easy as cake :drinks_no

good work, very easy..:)

Great guide

It made my 1.2q server work :p

erm... memmber erm can i ask u 1 question?? after go serverstartup than wait till everything ready than i go ingame but cant it say disconnected by wind ...(using 1.2q also ) pls help thx how do i get the server online

btw from all the steps i did correctly only ...
the muweb failed

You probably have a router? ^^

yup i do have a router .. and i am using the foreverdark router guide what so no problem y there still prob?

this is non router guide

yeah i noe but the onli diff between router and non-router is onli router need port-forwarding which i had done so

what client should i use after??

Why do i get Disconnected from my own server after 30 min max,... i set my server on the same pc that i'm playing maybe that is the problem and i set the ip to my Lan ip 192.168.2.104 should i use local host ip 127.0.0.1 ? help me plss...
What do i need to do!?:frusty::frusty::frusty::frusty::frusty:

Quote:

---

Originally Posted by pucabacsi

Why do i get Disconnected from my own server after 5 min max,... i set my server on the same pc that i'm playing maybe that is the problem and i set the ip to my Lan ip 192.168.2.104 should i use local host ip 127.0.0.1 ? helm me plss...
What do i need to do!?:frusty::frusty::frusty::frusty::frusty:

---

First... i can run a server on a 192.168.x.x ip w/o any problems,
Second... I can run both a server + client on my server without a problem,
So, it can only be one of the following:

• you computer does not have the required hardware/software for a mu server + client running simultaneously.
  • Solution: check your computer specs, if they are horrible... upgrade your comp
• your server files are bugged, or the main you are using does not support the server you are running
  • Solution: download all suggested files from a server release
• you configured something wrong during the setup
  • Go over your server config

Oke so my comp confs are good i got a Dual core 4800+ amd athlon 2 chache 2 giga ram in dual 10066 mhz Geforce 8500gts 256 256 ddr2 667mhz i think i got the good pc for this, i got alot of free memory.... maybe i got Vista something is wrong whit that the files are good checked two times and the settings are good and the files. i have a singel error Kernel library not found on server start ,connect server is that the prob ?
And i tried to connect with another pc and it was the same i got dc in 1 min :(( help me plss

From where u dowload MuServer 1.02Q please tell me!

cool ill watch it cuz im bord

where do u dowload MuServer 1.02Q ?

1.2q ?... -.-"

yea 1.2q

i can't dowloads with filefront :( plase uplod with rapidsher

thanx ;d

i cant download from filefront

Hi, i have a problem, when i run the Startup, it says Skill File cant be found

What version?

cool... nice nice one... tnx for the share mate... very helpful one..

Hello, i cannot access the specified link

that was a quick guide ! Thanks alots ! Will try it !!

Shit.

Hello,I cant access the link either x_x

y i cant go the the client web?

thnx you! for this video Guide! 10/10 of me is Realy nice

Verry good work thx

thank

Link to client and serverfiles doesnt work ;S

I cant download client & server files: http://forum.ragezone.com/f196/guide...images-235999/

maybe can upload in RapidShare: 1-Click Webhosting?

thi is real good guide

Anyone knows which client he using? 1.02, 1.02b, 1.02k, 1.02r, 1.02v?
I think he uses 1.2q foreverdark server.
But I am not sure whats the client version. I am still trying out.

FINALLY, i get my server up.
I am using:
This video tutorial
http://files.filefront.com/speedrunavi/;8550260;/f
1.2q foreverdark server
http://***************/index.php?dir=...20ForeverDark/
wind client for this server
http://hosted.filefront.com/TheMuDivision

Good tutorial

thnkx a lot man =]

cool good work

Nice one.:thumbup1:

But for beginners, this is not really good since you have to be slow... they have to understand all.

thank you very much

thx for sharing!!!

It seems like a great guide.. except I can't access the server files for no reason.. I wrote more detailed information to you by PM :)

thx bro

Good Video i like it :)

someone upload the server files at mediafire pls :)

supero xvr la guia me sirvio muxo me ayudo bastante

algn q sepa esp

agn q me ayude xfavor kn mi server

keroa yuda algn q em amnnd eun mp para q me ayude xfas

weeeeeeeeeeeeeeno xvr la guia me funiono peor ems altan errores los ire psoteando avr sia lgn me ayuda

dude is this for route or non router users?? ..

cause u did,nt showed us what port we need to portforward, and replaced IP everywhere :s LOL

i don't have permision to Server & Files :((
Cool Guide

Thank you :) Good :)

Can somebody help me fix this error :S
http://www.upload.ee/image/55870/Error.JPG

i have a question , there is a different between setup this season and season 4?
does the season 4 setup have something different in his procedure?
tnx BTW.:):

I can't download client & server files , why? i don't have permisiuns!

Please can some one give me the link for mssql 2000 because i can't find it.

good works thanks alot

awesome nice 1

nice guide ill try and beat it :P lol nice work man

Thnx for the upload maybe it'll help.

cool dude really helpful :D

dude, need your help in setting up a server:( i can't run it in my pc.

Good lock, Very Very Server

yea man

dont bump 6 months thread dude :/

thx man

good job man

Rolex i keep getting disconnected from server when i launch WHY? :P

thanks for your info

please help me that i could not access this link...

does it work to run a mu server on windows 7?

i get this when i try to download the server files.

Quote:

---

richardv23, you do not have permission to access this page. This could be due to one of several reasons:

1. Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
2. If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

---

The Link Of The Video Doesent Work For Me ;(

wow!!!nice:D

I can't access the Client & Server files on RZ

Quote:

---

vBulletin Message

disati, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

---

Please Reupload The Video Guide Tnx