CzF 1.00.08 Server Guide

CzF 1.00.08 Server Guide

Before we begin, here are some of the things you need to know.

You are required to install MSSQL 2005 which can be download here.
No need to attach the database, just restore it like you use to do on other version.

You will need some of the following system requirements to run this files.

Minimum system requirement:

• 1GB RAM
• 2.00 GHz cpu speed
• Win XP
• 5 mbit connection

Recommended:

• 2GB RAM or higher
• 2.50 GHz or higher
• WIN Server 2003
• 10mbit and UP

This guide consist of two versions: router and non-router. You will need to read this before you begin.

If you are NOT using any router, don't get panic about which IP you gonna put in each files.
If you are using a router, there are some couple of things you will need to know:

1. There are two different IPs
2. LAN IP and,
3. WAN/GLOBAL IP

In order to get this information, we must do the following things (follow images provided below):

1. http://images.dwteam.org/tut1.jpg
2. http://images.dwteam.org/tut2.jpg
3. http://images.dwteam.org/tut3.jpg
4. http://images.dwteam.org/tut4.jpg

To get your WAN/GLOBAL IP, visit WhatIsMyIP.com

Lets begin.
THIS IS NON-ROUTER VERSION, CLICK HERE FOR ROUTER VERSION.

Also i would like to remind everybody, YOU CAN RUN THE FILES IN ANY DRIVE (e.g Drive C:, Drive D:, etc).

Lets begin by opening CS folder. Inside that folder, you should have the following files (see image provided below):

• http://images.dwteam.org/tut5.jpg

Now, open "ListServer.dat" you will see something like this (see image provided below):

• http://images.dwteam.org/tut6.jpg

Replace "(your ip here)" to your WAN/GLOBAL IP. Now you will have something like this (see image provided below):

• http://images.dwteam.org/tut7.jpg

Open DataServer folder. Inside this folder you should have the following files (see image provided below):

• http://images.dwteam.org/tut8.jpg

Open "AllowableIpList.txt"you will see something like this (see image provided below):

• http://images.dwteam.org/tut9.jpg

Now put WAN/GLOBAL IP on the following line (see image provided below):

• http://images.dwteam.org/tut10.jpg

Quote:
NOTE: DO NOT INCLUDE "."
NOW DO THE SAME THING BY OPENING "DATASERVER2"

Open "Event_Server" folder. Inside this folder you should have the following files (see image provided below):

• http://images.dwteam.org/tut11.jpg

Now open "Data" folder. You should have the following file inside this folder (see image provided below):

• http://images.dwteam.org/tut12.jpg

Open "svconfig.ini" and you will have something like this (see image provided below):

• http://images.dwteam.org/tut13.jpg

Now change "(your sql login)" to your SQL username. Change "(your sql pass)" to your SQL password. Now it is important that you should put sql username and password. This will prevent outsiders connecting to your sql server without authentication.

Now you should have something like this (see image provided below):

• http://images.dwteam.org/tut14.jpg

Open "HackLogServer" folder and inside the folder you should have the following files (see image provided below):

• http://images.dwteam.org/tut15.jpg

Open "HackLogServer.ini" and you should have something like this (see image provided below):

• http://images.dwteam.org/tut16.jpg

Now change "(your ip here)" to your WAN/GLOBAL IP. Now you will have something like this (see image provided below):

• http://images.dwteam.org/tut17.jpg

Open "Ranking_Server" folder. You should have the following files inside the folder (see image provided below):

• http://images.dwteam.org/tut18.jpg

Open "svconfig.ini" and you should have something like this (see image provided below):

• http://images.dwteam.org/tut19.jpg

Now we have to put SQL username and SQL password. Please note that it is recommended that you should put your SQL username and password to prevent unauthorized access without authentication.

You don't need to change SQL username cause it is set already. All you have to do is to change the SQL password. Change "041898" to your SQL password. Now you should have something like this (see image provided below):

• http://images.dwteam.org/tut20.jpg

Now exit "Ranking_Server" folder and open "Data" folder. You should have all of these files (see image provided below):

• http://images.dwteam.org/tut21.jpg

Open "commonserver.cfg". You should have something like this (see image provided below);

• http://images.dwteam.org/tut22.jpg

As you browse down, you will see alot of shitty text. Now im not gonna explain to you each one of them. This is a guide for setting up the server to get 100% ONLINE.

Now search for "ChaosEventServer" and "DevilSquareEventServer". You should now be at this line (see image provided below):

• http://images.dwteam.org/tut23.jpg

Change "127.0.0.1" to your WAN/GLOBAL IP. You should have something like this (see image provided below):

• http://images.dwteam.org/tut24.jpg

Find "EventChipServerIp" (see image provided below):

• http://images.dwteam.org/tut25.jpg

Change "127.0.0.1" to your WAN/GLOBAL IP. (see image provided below):

• http://images.dwteam.org/tut26.jpg

Find "HackLogServer" (see image provided below):

• http://images.dwteam.org/tut27.jpg

Change "127.0.0.1" to your WAN/GLOBAL IP. (see image provided below):

• http://images.dwteam.org/tut28.jpg

Now close out that file and open "IpList.dat" and you will see something like this (see image provided below):

• http://images.dwteam.org/tut29.jpg

Change "(your ip here)" to your WAN/GLOBAL IP. (see image provided below):

• http://images.dwteam.org/tut30.jpg

Now open "MapServerInfo.dat" and you will see something like this (see image provided below):

• http://images.dwteam.org/tut31.jpg

Change "(your ip here)" to your WAN/GLOBAL IP. (see image provided below):

• http://images.dwteam.org/tut32.jpg

Open "ServerInfo.dat" (see image provided below):

• http://images.dwteam.org/tut33.jpg

Now change the server name to your's. It is important that you must put the correct server name if you are running sub-servers. (Prefer to CS folder tutorial part)
Change the server code. (prefer to CS folder tutorial part)

Open "Lang" folder inside your Data folder and open "kor" folder. This folder contains all the items and items options data for the server. Please do not mess with any of the files if you don't know what you are doing.

Now, open "commonloc.cfg" and you will have something like this (see image provided below):

• http://images.dwteam.org/tut34.jpg

Change "(your ip here)" to your WAN/GLOBAL IP (see image provided below):

• http://images.dwteam.org/tut35.jpg

For "ClientExeVersion" and "ClientExeSerial" , it is necessary to changed if YOUR client version is different from the default settings that is provided in the release. Please prefer HERE for more info.

LootingTime is for the duration where the items that is dropped from another players and from monsters that doesn't belong to you. For example, if you set this to 50 (value used in SECONDS) secs, the player need to wait 50 seconds in order for him/her to pick up items that is not belong to him/her.

Now, exit out to the main folder, open "ODBC" folder and run "ODBC.reg".

After that, we are ready to run the server.

There are two options for you to run the server:

1. Run through shortcuts
2. Run through StartUp Application

If you decide to run through shortcuts, follow the following steps:

Start by opening "Links" folder, make sure the shortcuts to each .exe path is correct, if not, change it to the correct one.

Right click each shortcut and select "Properties", you will see something like this (see image provided below):

• http://images.dwteam.org/tut36.jpg

Shortcuts need to configured:

Code:

---

Joinserver
ChatServer
Exdb
GameServer
CastleSiegeServer

---

Look for "Target" then modified the following shortcut:

Joinserver:

Code:

---

  X:\MuServer\JoinServer\JoinServer.exe /p55970 /caWAN IP /cp55557

---

ChatServer:

Code:

---

      X:\MuServer\ChatServer\ChatServer.exe WAN IP

---

Exdb:

Code:

---

      X:\MuServer\ExDB\ExDB.exe WAN IP

---

GameServer:

Code:

---

      X:\MuServer\GameServer\GameServer.exe WAN IP 55970 WAN IP 55960 55901

---

CastleSiegeServer:

Code:

---

      X:\MuServer\SiegeServer\GameServer\GameServer_CS.exe WAN IP 55970 WAN IP 55960 55919

---

Thats all, i hope you understand and you will succeed making your own server. Should you need any help, don't hesitate to contact me.

For more guides, visit MuOnline Guides Center - Home

good job thanks

thanks, it took me 3 months to finish the guide :P

You're a bit late, 1.00.8 is outdated, and there's guides on this version already. 10/10 for the effort tho.

meh, other guides is nothing compare to mine ;)

but thanks, and i think it still useful to new members

best guide ever...others is just..."messy" hahahha

i have a question..how to change/reskin ur own loading screen? do i need a converter? ><

i just joined the guide center..WOW very organized looking..looking forward to have more guide^^ cuz i really need them :P

Quote:

---

Originally Posted by Alwayz

best guide ever...others is just..."messy" hahahha

i have a question..how to change/reskin ur own loading screen? do i need a converter? ><

i just joined the guide center..WOW very organized looking..looking forward to have more guide^^ cuz i really need them :P

---

thats the word ^^

about the loading screen, ill look on it tomorrow (dont have client at the moment)

and thanks ^^, my guides is always organize and im keeping it that way :p

Yes, you always need a converter, it's very rare that the client load a direct jpeg, bmp etc.

yeah, i need to check my DVD backup for that tool

Use Mu skiner

It can convert :P

yeah, that tool is great.

another one of your awsome guides. thankyou.

Quote:

---

Originally Posted by ChineseGuy

meh, other guides is nothing compare to mine ;)

---

qft.

Databases for Sql 2000 (in server files its for Sql 2005) : Download

Great guide,real quality.Welcome back and great work =P

thanks :)

wow , nice guide (10/10) i will use it ! thx again :jump1:

Server Files details :

You now know how to set it up but here are some details in case you haven't seen the original release thread :

Full Season 1 WITH some season 2 monsters and season 2 quests.
NO Elpis NPC
100% Bugless EXCEPT for pull back when you warp to new map.Sure,its annoying,but think :
All events,maps,ingame features such as friend's list,guilds,chaos machine > BUGLESS

So enjoy these files people and remember to thank CzF,Wiredex for first guide which was helpful and Liselotte(ChineseGuy lol) for professional guide which really makes it easy for newbies and for pros.

Pullback can be fixed :). Either way nice guide liselotte not that I needed it but very nice ^^

please help no connection buttons when i enter the game.. thanks in advance.. i already did checking ip config.. waaaaaaaaaaaa help me

Quote:

---

Originally Posted by oninko

please help no connection buttons when i enter the game.. thanks in advance.. i already did checking ip config.. waaaaaaaaaaaa help me

---

read the guide through again..i followed it and it works perfectly

Quote:

---

Originally Posted by djspankman

Pullback can be fixed :). Either way nice guide liselotte not that I needed it but very nice ^^

---

Really? How can be pullback fixed??

And BTW: Very nice guide, I think that is the best here for this files :)

Good ! Nice 10/10

CS LOG

09: 34:38 Loading Config.ini
09: 34:38 Loading ListServer.dat
09: 34:38 Server active.
09: 34:38 Loading server list
09: 35:58 (0) GameServer Online. 201.24.204.54(55901)
09:37:06 Invalid Packet with Header: 0xA9 Len: 0x06

plss?? help me :~~
player connect
and havee error in CS :~~
:(

good guide but, when i try to connect on my server i got YOUR ARE DISCONNECTED FROM SERVER

what should i do?

check your main, hex it with your ip

i've checked and now i see the "server" but when i click on it, the login bar doesn't appear, so i can't login...

?

Glad that Crystal-X still remember me .
I thought no one remember me xD
Nice work ChineseGuy aka Liselotte .
Was actually offended when i saw 1.00.08 Guide again lols .
But its pretty good and better than mine i can say .
Its recommended for noobies who cant read my tutorials .

finally i log on server... but know... NO MONSTER ON ALL MAPS

check your mapserverinfo.dat, make sure all ip are correctly configured

Quote:

---

Originally Posted by ChineseGuy

check your mapserverinfo.dat, make sure all ip are correctly configured

---

How do you know if its correcly configured?

Because I have heard it must not be over 15 characters or some

Are there some rules? :)

look at this

http://images.dwteam.org/tut31.jpg

see the part where you gonna put your ip?

the S musnt delete or all npc and mobs will not shown in the server

Quote:

---

Originally Posted by ChineseGuy

look at this

http://images.dwteam.org/tut31.jpg

see the part where you gonna put your ip?

the S musnt delete or all npc and mobs will not shown in the server

---

Yeir I know, but what about character limintation?

i dont know, but all you have to put it your ip (numbers)

also, it wont support special characters

I forgot but the characters limitation are less den 13 or 15 .
Maybe u can make a dynamic IP like
yoyo.zapto.org , this will work because i know it will .

If u try to make a dynamic IP like this "yoyothisiscoolMUserver.zapto.org"
I gurantee you wont be able to start it up .

I Have a Error In My Data Server:
WZ_CreateChracter Stored Procedure Version 1
What i Do Now ?

Uhm.. amazing guide and all.. but it says there is router support. Says to "CLICK HERE".. meh.. doesn't work.. and I wasn't able to find router support on this guide.

oh, hmm, i must've copy the whole version of my guide which include router support, but this one isnt support router.

do u have to download sql 2005

yes you do, you need sql 2005 to use the db

chineseguy can u help me out do u have a msn? or xfire?

yeah, i have msn, but i dont usually go online much because msn is fkcing my cpu so i couldnt handle it.

if you have problems, post here or on my site.

thanks

well im new at mu online so i have no clue what realy to do

what do i do after i download sql 2005?

back up the database

how? can you take me tro some steps?

im not sure how to make a database can any1 help?

i think you should try to search in here for some basic tuts before you use this files. Newbies should run 97d server(for test only) to experience a lil bit more about muserver then after you know some basic stuffs(backing up database, server setup, troubleshooting, etc) then you can move on to newer version

thats what i did when i start hosting. I started from 97, study a lil bit then i move on to newer version even though i having problem with newer version, i tried to search more tuts in here and now, im a pro baby ;)

WZ_CreateChracter Stored Procedure Version 1

This Error Appears When I Open My Dataserver!
What i need to do now ?
My Dataserver dont open!!
WZ_CreateChracter Stored Procedure Version 1
WZ_CreateChracter Stored Procedure Version 1
HELP ME CHINESEGUY!!

Execute this query

Code:

---

CREATE Procedure WZ_CreateCharacter
        @AccountID                varchar(10),                --// 拌沥 沥焊
        @Name                        varchar(10),                --// 某腐磐
        @Class                        tinyint                        --// Class Type
AS
Begin

        SET NOCOUNT ON
        SET        XACT_ABORT ON
        DECLARE                @Result                tinyint

        --//  搬苞蔼 檬扁拳
        SET @Result = 0x00       

        --====================================================================================
        --        某腐磐 粮犁咯何 犬牢
        --====================================================================================
        If EXISTS ( SELECT  Name  FROM  Character WHERE Name = @Name )
        begin
                SET @Result        = 0x01                                --// 悼老 某腐磐疙 粮犁                                               
                GOTO ProcEnd                                               
        end

        BEGIN TRAN
        --====================================================================================
        --        拌沥 粮犁 咯何 犬牢  棺 后 浇吩 沥焊 犬牢窍咯 历厘               
        --====================================================================================
        If NOT EXISTS ( SELECT  Id  FROM  AccountCharacter WHERE Id = @AccountID )
                begin
                        INSERT INTO dbo.AccountCharacter(Id, GameID1, GameID2, GameID3, GameID4, GameID5, GameIDC)
                        VALUES(@AccountID, @Name, NULL, NULL, NULL, NULL, NULL)

                        SET @Result  = @@Error
                end
        else
                begin
                        --// 某腐磐 后 浇吩 汲沥
                        Declare @g1 varchar(10), @g2 varchar(10), @g3 varchar(10), @g4 varchar(10), @g5 varchar(10)                                               
                        SELECT @g1=GameID1, @g2=GameID2, @g3=GameID3, @g4=GameID4, @g5=GameID5 FROM dbo.AccountCharacter Where Id = @AccountID                       
                        if( ( @g1 Is NULL) OR (Len(@g1) = 0))

                                begin
                                        UPDATE AccountCharacter SET  GameID1 = @Name
                                        WHERE Id = @AccountID
                                                                               
                                        SET @Result  = @@Error
                                end
                        else        if( @g2  Is NULL OR Len(@g2) = 0)
                                begin
                                        UPDATE AccountCharacter SET  GameID2 = @Name
                                        WHERE Id = @AccountID

                                        SET @Result  = @@Error
                                end
                        else        if( @g3  Is NULL OR Len(@g3) = 0)
                                begin                       
                                        UPDATE AccountCharacter SET  GameID3 = @Name
                                        WHERE Id = @AccountID

                                        SET @Result  = @@Error
                                end
                        else        if( @g4 Is NULL OR Len(@g4) = 0)
                                begin
                                        UPDATE AccountCharacter SET  GameID4 = @Name
                                        WHERE Id = @AccountID

                                        SET @Result  = @@Error
                                end
                        else        if( @g5 Is NULL OR Len(@g5) = 0)
                                begin
                                        UPDATE AccountCharacter SET  GameID5 = @Name
                                        WHERE Id = @AccountID

                                        SET @Result  = @@Error
                                end               
                        else
                                --// 秦寸 后 浇吩 沥焊啊 粮犁 窍瘤 臼促.       
                                begin                                       
                                        SET @Result        = 0x03                                                       
                                        GOTO TranProcEnd                                                               
                                end                         
                end

       
       

        --====================================================================================
        --        某腐磐 沥焊 历厘
        --====================================================================================
        if( @Result <> 0 )
                begin
                        GOTO TranProcEnd               
                end
        else
                begin
                        INSERT INTO dbo.Character(AccountID, Name, cLevel, LevelUpPoint, Class, Strength, Dexterity, Vitality, Energy, Inventory,MagicList,
                                        Life, MaxLife, Mana, MaxMana, MapNumber, MapPosX, MapPosY,  MDate, LDate, Quest, DbVersion, Leadership,money )
                        SELECT @AccountID As AccountID, @Name As Name, Level, 0, @Class As Class,
                                Strength, Dexterity, Vitality, Energy, Inventory,MagicList,  Life, MaxLife, Mana, MaxMana, MapNumber, MapPosX, MapPosY,
                                getdate() As MDate, getdate() As LDate, Quest, DbVersion, Leadership,0
                        FROM  DefaultClassType WHERE Class = @Class                                       

                        SET @Result  = @@Error
                end

TranProcEnd:        -- GOTO
        IF ( @Result  <> 0 )
                ROLLBACK TRAN
        ELSE
                COMMIT        TRAN

ProcEnd:
        SET NOCOUNT OFF
        SET        XACT_ABORT OFF

        --====================================================================================
        --  搬苞蔼 馆券 贸府
        -- 0x00 : 某腐磐 粮犁, 0x01 : 己傍肯丰, 0x02 : 某腐磐 积己 角菩 , 0x03 : 后浇吩 粮犁窍瘤 臼绰促 
        --====================================================================================
        SELECT
          CASE @Result
              WHEN 0x00 THEN 0x01                --// 己傍 馆券
              WHEN 0x01 THEN 0x00                --// 某腐磐 粮犁
              WHEN 0x03 THEN 0x03                --// 后浇吩捞 粮犁窍瘤 臼绰促.
              ELSE 0x02                                --// 扁鸥 俊矾内靛绰 积己 圾菩 馆券 
          END AS Result
End
GO

---

what is the best 97d tut?

Mine haha :P

ok could you give a private tut ?

Quote:

---

Originally Posted by Wiredex

Glad that Crystal-X still remember me .
I thought no one remember me xD
Nice work ChineseGuy aka Liselotte .
Was actually offended when i saw 1.00.08 Guide again lols .
But its pretty good and better than mine i can say .
Its recommended for noobies who cant read my tutorials .

---

OF COURSE I REMEMBER YOU! xD
I remember all of my friends ;)
Your guide is very good too,I mean,I setup my 1.00.08 thanks to you.Liselotte's guide is also fantastic,but doesnt mean better than yours.Its the same quality,just with a different spice.
If anyone knows how fix pullback,post it here(and I doubt anyone can fix it,otherwise CzF would have done it themselves,and they real coders)

whats pullback?

nice guide ;)

Quote:

---

Originally Posted by ChineseGuy

whats pullback?

---

Everytime you warp/teleport your character to a map and you move,it pulls you back to the spot where you spawned to move.
I will PM you about something important,a little offer + some resources.

oh, i think its come kind of a anto-move hack, everytime you move to new map, the anti-hack check your locations or something like that and its pull you back to confirm the process.

in other theory, its a client issue.

I think your right.Security is good,but that pull back is sure annoying!I thought it was a bug,and I was trying to fix it in the GS ^^ eheh guess I suck,but hey lol thanks for the info.
Lost Castle event enabled in this server.I forgot the NPC code though,I think its around the ~300s.I will get it and post it soon :)

My Error In Dataserver Continues , After that query you pass me , ChineseGuy
The error of Dataserver continues.

234 = NPC Code - Goblin NPC for Lost Castle event!

Dude,are u trying this on sql 2005 or 2000?If its on 2005 ur doing it,try it on sql 2000 with :
Databases for Sql 2000 (in server files its for Sql 2005) : Download

Worked fine for me! =] Connected on Lan and Globally.

http://img139.imageshack.us/img139/9093/errorrn2.th.gif



Please help...i working all night and i can't fix this...All is configurated and tested , but wen i connect i see server,i past my acc and pass and then wain...And DISCONECT.. and gs have this error (only when i connect)
PLEASE HELP :(
Sry for my bad English , I'm BG

hi, please make sure the client version and serial in main.exe match on server side.

I us CzF client original... and when i open main.exe i have Chineses and i can't understand,in my kor forlder i have "9.99.9" and "XXXXXXXXXX"

What serials i need to past ?

Well if you use czf client with czf files it's all good.

wow...nice guide i gonne make my mu server now=) xD

how i can restore backup???

just select the backup daabase and restore it.

HI.
I have router and i have some questions.
What ports i need to enable in router?
It's all correct if I put WAN IP everywhere? Dont I need to use Lan IP?

I already configure files like in guide (putting WAN IP) and i have error when im try to run GS_cs.
error ss:
BLAD.JPG | Fotki, Zdj?cia, Obrazki Fotosik.pl

And when i try to run GS i have error: LoginServer connect fail.

help

hmmm...ChineseGuy can u make me some SS's where i can restore database...i don't get it ..how to restore it:S

somewhere in SQL Server Configuration Manager???

hmm, you dont, you need to attach i guess

Quote:

---

Originally Posted by Polli18

somewhere in SQL Server Configuration Manager???

---

You need to download the Studio Manager

i cant use GM commands like /gmove /trace /drop etc..
Why ?? someone answer me plz !! ASAP

Thanks!!

hey can anyone help me pls?

I have an error " GSDBSet ODBC Connect Fail" when I run Database...

Does anyone have a clue how to do it?
I understand that this is an ODBC prob...Maybe is because I have WinXP64 bit ...

Is there any ODBC for XP 64?

Cheers

i believe no, try to run on 32-bit

Hi, I need help...
I made my server, Used a NO-IP address instad of IP.
Everything is set, I run the client... BOOM!!
No servers.
My Connect Server also show that there's no servers...
Please help me =(

qual a configura

it works with sql 2000 ?!

amazing guide : ) ty :P

good work ^_^

I encountered, a problem.

I use the muserverstarter included in the repack and its stuck at running gameserver-cs

it will also happen if i use the link folder

Thanks dude, but is this applicable to other ver of MU Server that I might use?
I seriously have some issues with IP config =((

I'm having problems when I'm Starting Up MuOnline?

any solutions?

I did everything in the guide..

is there anyway I can add accounts to my server? My server is up and running and I can see my friend (through reading gameserver.exe) trying to login---however I don't know how to add accounts!

Thanks for your time!

i can`t login.... its shows me PASSWORD incorrect , everytime.. please help someone :/

Odbc connect error... using 2005 sql. any help? just for DataBase / DataBase 2
Event SERVER Loads PERFECT!!!!....

it is the best work i have ever seen!thank you!

The ip in main is 127.0.0.1??

Good tutorial, thanks you.

can i use SQL 2000?

May i ask were serverfile?

***************

THIS IS NON-ROUTER VERSION, CLICK HERE FOR ROUTER VERSION.
the router version doesnt work

can some one help me, i run the server but it in the CS it stucks
pls help

hy y have a question abut this MuServer . Im running CZF 1.00.08 MuServer and y can't find where to edit the Experience in Party! y whant to edit party experience when are 5 players in party to get 10-20% more experience!

hmmm try to look in Gameserver folder and see if theres a config file where you can make some custom changes to the game. its really old so I don't remember.

wow i havent post in this section for a long time.