[Question] About Put online server ?

I trying open online ..follow

///......
1)Enter the web: http://whatismyip.com/
2)Copy IP
Change all IPS, the following files:


Code:

Directory: /etc/localChange IPS: ChatNode_24, GlobalMgrSvr, LoginSvr, LoginSvr_01, WorldSvr and WorldSvr_24_01


Code:

Directory: /home/cabalChange IPS: gen_config

Remember: Only you put IPS, ie. "127.0.0.1" replaced by the ip that tells the page.

Annotation: I have configured the ips the well and the server walks perfectly online, if you have a different configuration and you're online, perfect, I work that way.

/////


after i fixed i can't connect the server


advice me pls ><

i have the same error as this guy lolz...

If you set everything to the wan ip (the one whatismyip gives you) then your computer must be connected to the internet directly and not behind a firewall or router. Both will stop the server talking to itself as well as stopping you connecting and this will be showing up all over your logs if you had checked.

You need to use 127.0.0.1 in all config spots except 2, the one near the top of loginsvr_24_01.ini and the one "for the client" at the bottom of chatnode_24.ini.

If you use a router your need to forward ports 38101 and 38121 to the centos machine ip and any firewall will need to have these ports open.

ok i forwarded those ports. So all i have to do is change all ip in ini's files to 127.0.0.1 except the one near the top of loginsvr. So what ip do i put in there? wan or lan?

the wan one (from whatismyip) in those two spots.

@chumpywumpy
sir can u make a thread on how to set cabal online? plss?

Video Here
You need open ports?, visit:
http://www.portforward.com/english/r...outerindex.htm[

@darkxl
wow thnx men!!! Im sorry for bothering u ^_^

@darkxl
Thnk sir ^^ i'll try

@darkxl

when i follow your video

i can't connect my server.

because of ?


help me plz

thnx

EDITED:
dark thnx hehehe and thnx to xz3r0x for telling bk wat to port to forward and thnx to bk for asking hahahaha. I forwarded port 38111.

Help.. i dont know my name router because i live in dormitory.U have program to know router?

if you dont have psychical access to the router u wont be able to forword those ports. Talk to your dormitory sys admin, maybe he will be a good person, and will forword those ports to your ip.. but i doubt it... But try and good luck bro :)

i can use HAMACHI Program?

maybe, but then u would have to bridge wmvare to your hamachi network card, and i dunno if it is possible, also you would have to change ips in server config to hamachi ip ;)

Edit: i just googled and found that there is hamachi for linux (main hamachi page) so installing it in your centos box, and changing server ips to linux hamachi ip, should let clients to connect to your server using hamachi

How i can use HAMACHI. I must install hamachi in Centos or windows?

How i can use HAMACHI. I must install hamachi in Centos or windows?

sorry. i double post T_T

you three posted :) well u must install hamachi on centos, because cabal server needs an hamachi ip, u don't need to install hamachi on windows, because your server can connect to your db throu your local ips. and your client can connect throu local ips to server, just public users would need to install hamachi, and point your centos hamachi ip in their client configs ;)

ok . i understand Thk man *0* NicEEEEEEE

I use hamachi it work
I can play online now...very happy

I just get errors that it cant run the server with WAN ip, but i can play with my local IP

Congratulations to all those who were able to put in server mode "online"
In my opinion "Hamachi" stinks xDD

http://61.19.248.235/uploads/2e9683b671.jpg
when i write 'hamachi list' it show ip-addr why? T_T Help me plz..

Quote:

---

Originally Posted by darkxl

In my opinion "Hamachi" stinks xDD

---

Agreed :( Hamachi is simply not needed if everything is configured properly and it introduces lag as there is a whole new (and unnecessary) service involved. I've run into it in several private server communities.

Still, it does help those who have no idea how to configure their network which saves people like me trying to explain it in a way that they understand or simply having to do it for them. The problem starts when the Hamachi users start asking questions as the people that could normally help them generally know nothing about Hamachi works and therefore can't help them with their "weird" setup.

@`CcyClOnE` - I am going to be writing a guide or two over the next few days. Actually making a server available outside the LAN is a complicated affair though as a guide cannot cover every router/modem combination and it really needs to or the guide will only work for some. It's another problem i have had before but i'm going to do some testing and see if a trick i used for provate servers on another game will work here.

All port in file '' ChatNode_24, GlobalMgrSvr, LoginSvr, LoginSvr_01, WorldSvr and WorldSvr_24_01''
i must config Port on HAMchi ? My port hamachi 32771

such as
[DBAgent]
Addr=5.230.143.99
Port=38180 -------> change or not

not to change any port!!!!!!!!!!!!!!

thk darkxl i can't login T_T .

Quote:

---

Originally Posted by bk2483

i have the same error as this guy lolz...

---

Don't leech here as you have told me from the other forum that Ragezone members are all leechers!!! Then what are doing here? Leeching?

lolz funny how this fag always talk about leeching files. i guess when i shared my ep4 db u didnt leech it. well anyways thnx to chump and dark and xz3rox for helping me make my server online.

@juri the fag
at least im saying thank you not like u always flame and talk crap. and leech.

@dark or chump
how to set aa server online using static ip.?

Quote:

---

Originally Posted by `CcyClOnE`

@dark or chump
how to set aa server online using static ip.?

---

what do you mean "using static ip" ?, so if its static, just enter it in configs and all, u should know that :) or maybe i dont understand your question... ;)

i did wat u said. but the servers wont connect. it just stop. if i use the lan ip of centos it connects.

Quote:

---

Originally Posted by xz3r0x

what do you mean "using static ip" ?, so if its static, just enter it in configs and all, u should know that :) or maybe i dont understand your question... ;)

---

when is useing ip from http://www.whatismyip.com/

i can start the server ..but i can't join my server

i think everything ok ... except port forward


how can i do it /??

ok here xz3rox.

example static ip: 11.11.11.11
centos ip: 192.168.100.2 in whatismyip.com its 11.11.11.11

then in the ini's file i put the static ip. but when i start the server it work..

Quote:

---

Originally Posted by `CcyClOnE`

ok here xz3rox.

example static ip: 11.11.11.11
centos ip: 192.168.100.2 in whatismyip.com its 11.11.11.11

then in the ini's file i put the static ip. but when i start the server it work..

---

I fink u wanted to say when u put your public(static) ip to your server configs, server fails to start :) right? So it's because your centos cant see you public ip (11.11.11.11) and it should be that way :) so to make it visible in your centos u could use ip alias :) (its a function to assign virtual ip addresses to psychical Ethernet device :) )

commands would be:

Code:

---

ifconfig eth0:0 YOUR_PUBLIC_STATIC_IP
route add -host YOUR_PUBLIC_STATIC_IP dev eth0

---

assuming your public ip is 11.11.11.11 the commands would look like this:

ifconfig eth0:0 11.11.11.11

route add -host 11.11.11.11 dev eth0

eth0 is main ethernet device in your centos :)

and know your centos thinks that eth0 has 2 ip one is private 192.168.x.x and other the public one :) u even can test it ifconfig eth0:0

and now your server will assume that your public ip is his private ip :) or something like that.

But ensure u forward all ports needed by client to your centos private ip 192.168.x.x and thats all ;) hope helps..

One more thing ip alias is lost after reboot of centos, so u must run the commands after every centos rr, or make a startup script ;) cheers

wow thnx men u really helped me but my problem now is the server cant conenct to the db. and how do u forward ports if u dont have any router

Quote:

---

Originally Posted by plemaster

when is useing ip from http://www.whatismyip.com/

i can start the server ..but i can't join my server

i think everything ok ... except port forward

how can i do it /??

---

well yes port must be forwarded to your centos private ip port numbers are:
38121, 38101, 35101, and all your WorldServers ports (by default there is only one WorldSrv_24_01 and the port is 38111)

But sorry i cant say how to forward them, because i don't know what firewalls/routers u use, or how to config them

Quote:

---

Originally Posted by `CcyClOnE`

wow thnx men u really helped me but my problem now is the server cant conenct to the db. and how do u forward ports if u dont have any router

---

yes if your windows already with static ip, its a little bit confusing then try to leave the ip in server configs private ones, destroy the ip alias and change only one ip to your public in WorldSrv_24_01.ini this AddrForClient=PUBLIc_IP

about port forwarding in windows don't know, maybe it lets to connect alredy, just disable the firewall on win

Just try. And one more thing, somehow i left all my ip in servers ini files, my private ones, and public clients still could connect ;) so i think it doesn't matter on ip settings, just right port forwarding ;) but not sure 100%

my problem is i cant connect i dont know how to forward port withouth router. hehehe

as i said, maybe your windows firewall is on and it disables requests to specific ports, just try to disable it :)

don`t know what to say anymore :) the best way would be to install centos on separate computer, plug the main cable to it, and from another ethernet device on that computer to windows pc, then set up a masquerade to windows ethernet. and u have a perfect cabal server + router in one :)

or maybe some super duper vmware and windows network configs :/

Sorry mate, can't help :/

ehheehehe thnx .the firewall is disabled. i will try to fix this hehee.

Quote:

---

Originally Posted by xz3r0x

well yes port must be forwarded to your centos private ip port numbers are:
38121, 38101, 35101, and all your WorldServers ports (by default there is only one WorldSrv_24_01 and the port is 38111)

But sorry i cant say how to forward them, because i don't know what firewalls/routers u use, or how to config them

---

thnk i'll try

Quote:

---

Originally Posted by chumpywumpy

If you set everything to the wan ip (the one whatismyip gives you) then your computer must be connected to the internet directly and not behind a firewall or router. Both will stop the server talking to itself as well as stopping you connecting and this will be showing up all over your logs if you had checked.

You need to use 127.0.0.1 in all config spots except 2, the one near the top of loginsvr_24_01.ini and the one "for the client" at the bottom of chatnode_24.ini.

If you use a router your need to forward ports 38101 and 38121 to the centos machine ip and any firewall will need to have these ports open.

---

You said you need to use 127.0.0.1 is all spots except 2, but in Darkxl's video he changes the ips in all the ini files...

Would you mind clarifying?

Ok i want to say 1 thing. dark show in post your login and gen files in this post and show in which places we need change ips and in which places we dont need change ips. ok?

And yes. i need change in all ini files those ips to my ip 195.216.178.161(centos ip is 192.168.184.130).