Installing ''Microsoft Loopback Adaptor''
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
After this go to your router and create a DNS Server with your local IP: 192.168.1.xx
http://img299.imageshack.us/img299/8...lvedog2.th.jpg
And from Advenced Security open the ports!
http://aycu09.webshots.com/image/247...9063650_rs.jpg
Than go : C:\Windows\system32\drivers\etc\
Open the ''Host file'' and u will see the followed information :
[CODE]# Copyright (c) 1993-1999 Microsoft Corp.
#
# Dit is een voorbeeld HOSTS-bestand dat wordt gebruikt door Microsoft TCP/IP for Windows.
#
# Dit bestand bevat de toewijzingen van IP-adressen naar hostnamen. Elke vermelding
# moet op een afzonderlijke regel staan. Het IP-adres dient in de eerste kolom te worden
# geplaatst, gevolgd door de bijbehorende hostnaam. Het IP-adres en de hostnaam dienen
# gescheiden te zijn door ten minste
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
ths is for play in same pc with server?
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
why should i use this?how can it helps me?
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
Crive
ths is for play in same pc with server?
yes
Quote:
Originally Posted by
♥ Deiulicious ♥
why should i use this?how can it helps me?
Because some people who have Router cant open server! And they shay...
Hey man i have a problem I start server all Good all run OK but i cant see the server what happend?......
Soo here i come, with my guide!
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
I havent router, i install "Microsfot LoopBack Adapter".
And CS show error "Connection network disconnected" in red color.
LoopBack connection "Connectivity limited or nulled" and i dissabled connection default from windows.
I have selected option "Obtain an IP address automatically" I select the option below?.
Sorry for my bad english, im from Argentina.
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
you must set the IP on LoopBack Adapter
Like here:
http://img179.imageshack.us/my.php?i...pconfigro5.jpg
And dont forget about PORTS!
[ tienes que usar todo como es en la imagen, si usas los mismos tiene que andar!(sorry for my bad cattalan) suerte]
I no te olvidas de abrir los ports!
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
hackalin
tks..
np my friend! :P
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Do u have the guide for linksys instead? From the dns part i dun understand, if ur talking about the router, if ur not talking bout the router, then tell us the site?
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
where i can download this Microsoft Loopback Adapter?
is this software or drives or a kind of thing?
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
christoper
where i can download this Microsoft Loopback Adapter?
is this software or drives or a kind of thing?
Start>Control Panel>ADD HardWare and fallow the steps
turn the Control Panel to clasic view!
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
skyblader33
Do u have the guide for linksys instead? From the dns part i dun understand, if ur talking about the router, if ur not talking bout the router, then tell us the site?
go to your router http://192.168.1.1 and create a DNS Server with your local IP: 192.168.1.xx
exemple in this img:
http://img299.imageshack.us/img299/8...lvedog2.th.jpg
And from Advenced Security open the ports!
The ports are someting like TCP IP:192.168.1.xx start to: 80 end : 80
do not open ports like start 80.... end 55999 this is crapy!:punch:
exemple in this img:
http://img375.imageshack.us/img375/1...rtssye8.th.jpg
1 Attachment(s)
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
HurryPoker
Im look u post neet more information of routers
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Im look u post neet more information of routers
put your local ip in x:\windows\system32\drivers\etc\hosts
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
what ports i should open >? why you deleted numbers from ports?
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
audrezz
what ports i should open >? why you deleted numbers from ports?
because are secret for my server security! the server ports like:
JoinServer
Port = 55970 or your port!
DataServer1
Port = 55961 or your port!
DataServer2
Port = 55963 or your port!
ExDataServer
Port = 55906 or your port!
EventServer
Port = 44456 or your port!
RankingServer
Port = 44455 or your port!
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
fredson37
Im look u post neet more information of routers
if you see the www files theat mean u dont have router you have modem!
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Hi all
I use router with 2 pc connected.
i follow all guide steps and wen i set global ip in properties TCP/IP my no-ip DUC v2.2.1 Update to
Updating to IP: Internal xxx.xxx.xxx.xx and network people cant connect, only me.I need no-ip Updating to IP: NAT/Router/Proxy xxx.xxx.xxx.xx for network people conect and me too
im tired about this trouble.
plz somebody help me
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
lol you don't have to restart you're pc each time you connect/disconnect the adapter!
anywayz, good guide ;)!
PS : You could at least explain ;; "What a loopback adapter does, and where do you need it for"
Re: [Guide] Installing ''Microsoft Loopback Adaptor''
Quote:
Originally Posted by
noobies
lol you don't have to restart you're pc each time you connect/disconnect the adapter!
anywayz, good guide ;)!
PS : You could at least explain ;; "What a loopback adapter does, and where do you need it for"
What is the Microsoft Loopback adapter and why do I need it for SQL Server?
The Microsoft Loopback adapter is a testing tool for a virtual network environment where network access is not available. Also, you must use the Loopback adapter if there are conflicts with a network adapter or with a network adapter driver. You can bind network clients, protocols, and other network configuration items to the Loopback adapter, and you can install the network adapter driver or network adapter later while retaining the network configuration information.
SQL Server is dependent on network functionality - even for the set-up routines. Specifically it needs to use named-pipe/mailslot functionality on NT machines. These usually require a network card to be present. If you don't have a network card then go to control panel/networks, choose add adapter and then add the Microsoft loopback adapter - which is just a dummy driver, no hardware involved. This needs to have working network protocol(s) bound to it. Let whichever protocols you have use default parameters, EXCEPT for tcp-ip. If you are using this then do NOT specify dhcp assigned address, use 192.168.1.1 as the IP address and 255.255.255.0 as the subnet mask. This is a standard RFC1918 non-routed IP address so shouldn't clash with any dial-up address you may be given by an ISP.
If the server service does not start after installing the loopback adapter and you get the following message in the event log, then you need to re-install your *NT* service pack to synchronise your NT networking files. "The server service terminated with the following error: Not enough server storage is available to process this command"
One way of testing that the named-pipes functionality works is to run the makepipe and readpipe utilities that come with SQL Server. Run makepipe in one command window. Then run readpipe in another. If these work (i.e. the readpipe connects to makepipe and closes it down) then it is a good indication that networking functionality is ok.
For Win9x machines you don't need a loopback adapter to install but you do need to have the "MS Network Family Driver" installed and the default network client.
