Printable View
I finally found a editor that changes o3d files. Haven't tried it but it should work.
Just try it out. :D
I will supply absolutely NO support for this. I just found it. :D I did not create it
Download: http://www.swegrafix.net/upload/files/makeo3d.rar
i'll check it out and report in a bit
*edit* You need 3ds files, cant import dds :x i'll look for a converter
You know... DDS only holds the textures. ^^ Not the Model. :PQuote:
Originally Posted by chanaz
Lol i just remembered that. Im about to try and make a keyblade (2h sword) wish meh luck
Good Luck man(gal?). :D Hope it works. :D
no luck so far, freezes up whenever i load a file, i'll try dxf (im a guy :p)
Okay. :D Damn it... I really hope that someone can figure out a way to make this work. :)
:X i found something out, the flyff o3ds arent in the same format this editor uses. This is for darkstone files and the flyff ones are in a different format. they use this stuctureI found this from fatduck of XentaxCode:Code:
--------------
Header section
--------------
byte uknCount1
struct uknData1 {
byte
} uknData1[uknCount1]
dword ?? //always 0x15
byte X 4 //??
dword X 8 ?? //always 00
byte X 39 //??
dword ?? //always 0x3E
dword ?? //always 0x3F
byte flag1 //??
byte flag2
byte flag3
byte flag4
byte flag5
struct uknData2 {
float X 3
} uknData2[flag2]
dword //??
dword //??
dword //??
dword lodCount
------------
Mesh Section
------------
struct LODmesh {
dword X 2
dword uknCount3 //?? Something related to bones
struct uknData3 (
dword
} uknData3[uknCount3]
dword
dword nTermimator //0xFFFFFFFF
float X 16 Matrix4X4 //transformation
float X 6 BBox //?? Bounding Box
byte X 40 //always 00
dword XCount //?? Vert Shader
dword VtCount //verts count
dword FcCount //face count
dword FcSize //Face indices size
struct XData {
float X 3
} XData[XCount]
struct VertPool {
float X 3 posXYZ
float weight1
float weight2
word Bone1
word Bone2
float X 3 NormalXYZ
float X 2 UV
} VertPool[VtCount]
struct Face {
word idx1
word idx2
word idx3
} Face[FcCount]
struct XIndex {
word idx
} XIndex[VtCount]
dword XXCount //same as XCount
struct XXData {
dword
} XXData[XXCount]
----------------
material section
----------------
dword
dword MatCount //?? *material count(even MatCount = 0, still have material)
struct Material {
float x 3 colorRGBA
float x 3 colorRGBA
float x 3 colorRGBA
float x 3 colorRGBA
dword //always 00
dword TexLeg
char[TexLeg] szTexture
} Material[MatCount]
dword matIDCount //face material count
struct FaceMatID {
dword //always 0
dword MFcCount //face for this MatID
dword MatID
dword //always 4
byte X 120 //all 00
} FaceMatID[matIDCount]
} LODmesh[lodCount]
lol xD check my thread: http://forum.ragezone.com/f457/3d-converter-491908/
>.> u beat me to it. and i thought i was gonna be the first to do itQuote:
Originally Posted by pipelli
Hey feel free to make a better tool :)
my can not even convert every file!
Also mine can not convert back.
Could you release source code? :DQuote:
Originally Posted by pipelli
There is no need for source code, since i just did what fatduck said 1 or 2 years ago..
ok, i found 1 or 2 differences to his description but if you try to do this you'll find them yourself...
i had no knowledge about 3d formats before i just said "Im gonna do this now".
the procedure is just like that: read byte uknCount1, read next uknCount1 bytes, read the dword, read this with lenght of that and blabla..
hmm now to get to making it backwards into a o3d again
Then we just need to get the structure of the obj. :D