[RELEASE] How to Set Up Ac Web Ultimate Repack 7.8 Updated for 2.4.3

1)Download the updated repack >--HERE--<(Original post---[Release] AC Web Ultimate Repack 7.8 - Updated for 2.4.3 - WarpNPC

http://i279.photobucket.com/albums/k...l922/Step1.jpg

2)Download Hamachi From www.hamachi.cc Then Install It!!! Then Create a New Network
http://i279.photobucket.com/albums/k...l922/Step2.jpg
3)Extract the downloaded content with WinRAR to your C:/ Drive.

4)Open up your Ac-web folder then Arcemu then configs and then open up Realm.conf and edit the following Change what i have changed in red.

Quote:

---

#######################################################################
# ArcEmu Realms Configuration File
# Last updated at revision 336 by Dameon
#######################################################################

#********************************************************************************
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. *
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "SET THIS TO YOUR HAMACHI IP"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
#
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America,
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "AC Web Ultimate Repack" <<<< EDIT TO YOUR REALM NAME!!!
Address = "127.0.0.1:8129" <<< EDIT THIS CHANGE ONLY 127.0.0.1 To YOu Hamachi IP!!!
Icon = "PVP"
Population = "1.0"
TimeZone = "1">

Timezone = "1"

---

5) Now open Your Arcemu-Logonserver and edit what i have in red!!!

Quote:

---

#######################################################################
# ArcEmu Realms Configuration File
# Last updated at revision 425 by neo_mat
#######################################################################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost" <<< CHANGE Localhost TO YOUR HAMACHI IP!!!
Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 2.1.1 was build 6739.
#

<Client MinBuild = "8089"
MaxBuild = "9999">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "ascent"
AllowedIPs = "127.0.0.0/24" <<< change Only the 127.0.0.0 To Your Hamachi Ip!!!
AllowedModIPs = "127.0.0.0/24"> <<<<<change Only the 127.0.0.0 To Your Hamachi Ip!!!

---

6)Now open arcemu-world and edit what i have in red!!!

Quote:

---

#######################################################################
# ArcEmu Configuration File
# Last Update: $Id: arcemu-world.conf rev1319 $
#######################################################################

#/********************************************************************************
# * How to use this config file: *
# * Config files are in a block->variable->setting format. *
# * A < signifies the opening of a block, the block name is expected after that. *
# * After the block name, a space and then the settings sperated by = / ' '. *
# * *
# * e.g. *
# * <block setting="0" someval = "1"> *
# * *
# * Comments can be in C format, e.g. /* some stuff */, with a // at the start *
# * of the line, or in shell format (#). *
# ********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
# Database.Host - The hostname that the database is located on
# Database.Username - The username used for the mysql connection
# Database.Password - The password used for the mysql connection
# Database.Name - The database name
# Database.Port - Port that MySQL listens on. Usually 3306.
# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = SQLite (MySQL is stable, others are not)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<WorldDatabase Hostname = "SET THIS TO YOUR HAMACHI IP" Username = "root" Password = "ascent" Name = "whydb" Port = "3306" Type = "1">
<CharacterDatabase Hostname = "SET THIS TO YOUR HAMACHI IP" Username = "root" Password = "ascent" Name = "logon" Port = "3306" Type = "1">

---

7)Go into your repack folder again and go into Tools.
Then pick your country enUS-USA, enGB-Europe (i think)
and then copy ad.exe and the maps folder and put it in your WoW Directory.
C:\program files\world of warcraft\
It should take roughly 15-20mins. Then once its finished delete the Ad.exe and move the maps folder into your ArcEmu directory
C:\AC Web Ultimate Repack\Arcemu just pop it in there.
http://i279.photobucket.com/albums/k...l922/Step7.jpg
UPDATE: Before your server will start u must Start up Mysql Then go into your database using a Program Like Navicat You Can Get it From Here And Install it Then Click Connection And Enter ascent for The Password And Then Edit The Connection Name To What You Want it to be Then Click Ok
http://i279.photobucket.com/albums/k...2/Navicat1.jpg
Now Double Click On Your Connection
Now Click Manage Users
Now CLick Add User
Put root For username
For Host Put your Hamachi Ip
And For Password Put ascent
Then Click Ok
http://i279.photobucket.com/albums/k...2/navicat2.jpg

Now Click Select All Then Click Save!!!
http://i279.photobucket.com/albums/k...2/navicat3.jpg

8)Then just start up your server (Logonserver,World) apache is only used for your website so dont worry about that for now.

http://i279.photobucket.com/albums/k...22/step7-1.jpg

9) Set Realmlist too Your Hamachi Ip and login with the default user and pass
user:admin
Pass:admin
and there you go it should be running perfect
http://i279.photobucket.com/albums/k...cal922/WoW.jpg

You MUST update game to Patch 2.4.3
You MUST have .Net Framework 3.5 installed
for the repack applications to work


IF there is ANY problems, spelling mistakes or issues please post here and let me know so i can fix this.
Or Add me On Msn Mjnorcal922@aol.com I will Be Making a Video On How To Make The Site And Set Up the Server Later!!!

You also need to change some path's in mysql ,and apache for them work.

This is what happens when i double click the connection.
http://i207.photobucket.com/albums/b...0/Untitled.jpg