Im not sure about default gateway...

umm.. i need good man who can help me to start the server (through TeamViewer ). I have a really big problem... My Contacs: msn - mulkis@windowslive.com and skype - ryder_sha . Please help me. I tried to run server several times.
And yeah.. there are several spots...
1st. In my Local Area Connection. There is no "Default Gateway"
2nd. Can't connect to Winscp but can connect to CentOS.
3rd. My internet is Dial-Up. So maybe there is problem?

Firewalls are turned off. In windows and in CentOS.
And yeah.. ip configs..
http://img7.imageshack.us/img7/4502/...b081123ir0.gif
http://img145.imageshack.us/img145/6...b081123im4.gif
More....
http://img8.imageshack.us/img8/297/s...b081216uh5.gif

IF need something more say to me.

Waiting for your help :)

Is your vmware networking set to NAT or Bridged? It looks like your centos has picked up a WAN IP instead of a LAN one so it should be the one on the ppp adapter and NAT.

It is set to NAT. I've tryed to put Default Gateway from PPP but nothing happens.
And about router... I don't have it. Maybe this is problem? Or.. i can start the server without it?

Regards, Grandas.

CentOS started ok. problem still is.chumpywumpy i've set default gateway from PPP adapter and connection type NAT but i've still got same problem.

EDIT: Sorry for double-post.

I'm not really sure on this one, it's a fairly unusual setup and i bet the cause is the same as the other mysterious networking issues that get reported. I'm half convinced it is a DHCP problem but until i get my internet access back and try testing a few myself it is a very tricky one to pin down.

I know the node type being "unknown" is not good. Once case is below and if you google "node type is unknown" you will find a few other solutions/reasons.

http://support.microsoft.com/kb/310570

OK your gived microsoft site ain't helped so gonna try googling :):
Something more... i was trying to release and renew and watch what i've got..
http://img24.imageshack.us/img24/101...b121636rk1.gif
OK... I've changed to hybrid. This is how to... Need to go to regedit then HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netbt\Parameters\ and add a DWORD Value (that i've done) and call it DhcpNodeType in value write 00000008. And it will change. But... i still cant see my default Gateway. there are screen:
http://img13.imageshack.us/img13/631...b121658ev0.gif

OK sorry for mistake... after another PC restart node changed again to unknown
And i turned on a "proxy enable"
And mine Local Area Connection in taskbar is writing "Limited or no-connectivity" Maybe there is problem or not?

Yes that is a problem. If the ppp adaptor is supplying your internet what is plugged into your ethernet (network) port?

If i understand right than in my ethernet port is somekinda cable (blue) which is connected to that port and modem. there is screen: http://img135.imageshack.us/img135/8434/cabletx4.jpg
If not than say what i need to do.

OK i found something interesting... Iread somewhere that windows xp service pack 2 is taking the Default Gateway IP but i have service pack 3 and maybe there is problem? Or problem for "limited or no conectivity" can be from my ISP?

[mod]do not double post, use edit[/mod]

Service pack 3 won't be anything to do with it (i have SP3 too). What i don't understand is why you have an ethernet cable without a lan or a cable provider. I'm tempted to say ignore the ethernet completely and follow the IP) address in the PPP adapter, set your VMWare networking to "NAT" and see what the VMWare DHCP server gives to centos in terms of ip/netmask and gateway. I think that is the best plan.

Ok i will try it :)
Here what i've got:
http://img132.imageshack.us/img132/1...b171511ac9.gif
And yeah.. tryed to login into winscp but same.. connection timed out