I'm searching for Perfect World Client 1.3.6 but don't find nothing!
I have the Perfect World Client 1.3.1 but don't know how to update this to 1.3.9.
Help me! :(:
Printable View
I'm searching for Perfect World Client 1.3.6 but don't find nothing!
I have the Perfect World Client 1.3.1 but don't know how to update this to 1.3.9.
Help me! :(:
put into google pw patch 13-19
SAME PROBLEMQuote:
Originally Posted by vinicius.edson
http://www.perfectworld.com.my/downloads-patch.asp
Anyone can explain which update is for which version ?
2 to 6 // 6 to 12 // 12 to 13 // 13 to 16 etc...
How i need from 1.31 client to update for 1.36 or 1.39 ? :grr:
Don't patch the client pass 13 (1.3.1) unless your server truely is a 1.3.6 or higher one and that's just assuming it's that and not because at patch 16 and beyond connection protocol has been changed to prevent the client files from being modded to connect to unofficial PW servers easily.
Is there a clear guide on how to patch the client of 1.3.6 since it is more difficult ? (I have found nothing on this in 3 days of searching) Thanks for any consideration.Quote:
Originally Posted by test1234567
Ok...here is the guide to set up client 1.3.6 but this guide is for those with client version 1.2.6
File u need:
1. Perfect world client v1.2.6
2. Patch file 2-6, 6-12, 12-13
Configure client
- Install the client. Make sure the client version is not over version 1.3.6
- If your version is below the version 1.3.1 then manually patch it to version 1.3.1 or version 1.3.6 (patch 12 – 13)
- Firstly, STOP the client updating after installation
- Then open the files inside the PW Client folder because it need some editing. With notepad, edit:-
PW\patcher\server\updateserver.txt
Code:
Delete everything then put the codeQuote:
"patch" "http://nopatch"
Perfect World\element\userdata\server\serverlist.txt
Code:
Change the server name and put your ip address (don’t change the port ip 29000)Quote:
Your server name 29000:192.168.1.10 11
DELPHI 29000:delphi.perfectworld.com.my 12
Perfect World\element\userdata\currentserver.ini
Code:
Change the servername and the ip addressQuote:
[Server]
CurrentServer=pwserver
CurrentServerAddress=29000:69.145.180.18
- Save all the edited file then test the server
Thank you so very much for your reply. I will try this and post the result. As of now...I am getting the error message: "Your end client is outdated.." 0.oQuote:
Originally Posted by asreinna
It is at 1.3.1 (patched to 12-13) (But not past it). Hmm...and by the looks of it, the patches take the client PAST 1.3.6 to 1.3.8..:scared:..not sure how to get the client to 1.3.6. (takes an aspirin)...ok...round two.
i have here 1.3.6 but its in MYCN,
@asreinna
do you know to fix bug quest and bug skill?
@rubixcube40
which client did u use? if the client pass 1.3.6 then u need to downgrade it but i dunno how to do it....hehe
@shockwav3
dunno...skill work fine on my server
I have two clients presently... 1.2.6 myen, and 1.3.9 International.Quote:
Originally Posted by asreinna
I have installed 1.2.6 MyEn, then, with your advice Asreinna, have patched it to 1.3.1. My server successfully connects to the database....and the register page is working. The problem I keep running into is...(jpeg attached)...no server connection...
check ur glink file
code:
change here is the ip address into ur ip address...dont change 127.0.0.1Quote:
nano /home/glinkd/gamesys.conf
Thank you Asreinna, your continued help is most appreciated. I have checked the glinkd file, and I found something most...unusual...there are no IPs of 127.0.0.1 anywhere on the glinkd. Instead, there is:Quote:
Originally Posted by asreinna
[GLinkServer1] . [GLinkServer2]
type = tcp . type = tcp
port = 29000 . port = 29000
address = 10.0.2.15 . address = 192.168.(my lan ip)
so_sndbuf = 12288 . so_sndbuf = 12288
so_rcvbuf = 12288 . so_rcvbuf = 12288
ibuffermax = 16384 . ibuffermax = 16384
obuffermax = 65536 . obuffermax = 65536
tcp_nodelay = 0 . tcp_nodelay = 0
listen_backlog = 10 . listen_backlog = 10
accumulate = 131072 . accumulate = 131072
max_users = 3000 . max_users = 3000
halflogin_users = 6000 halflogin_users = 6000
sender_interval = 200000 . sender_interval = 200000
accumu_packets = 32768 . accumu_packets = 32768
mtrace = /tmp/m_trace.link . mtrace = /tmp/m_trace.link
compress = 0 . compress = 0
close_discard = 1 . close_discard = 1
urgency_support = 1 . urgency_support = 1
version = 10301 . version = 10301
----------------------------.-------.-----------------------------------------------
[GLinkServer3] . [GLinkServer3]
type = tcp . type = tc
port = 29000 . port = 29000
address = 192.168.(my lan ip) . address = 192.168.(my lan ip)
so_sndbuf = 12288 . so_sndbuf = 12288
so_rcvbuf = 12288 . ibuffermax = 16384
obuffermax = 65536 . obuffermax = 65536
tcp_nodelay = 0 . tcp_nodelay = 0
listen_backlog = 10 . listen_backlog = 10
accumulate = 131072 . accumulate = 131072
max_users = 3000 . max_users = 3000
halflogin_users = 6000 . halflogin_users = 6000
sender_interval = 200000 . sender_interval = 200000
accumu_packets = 32768 . accumu_packets = 32768
mtrace = /tmp/m_trace.link . mtrace = /tmp/m_trace.link
compress = 0 . compress = 0
close_discard = 1 . close_discard = 1
urgency_support = 1 . urgency_support = 1
version = 10301 . version = 10301
-----------------------------------------------------------------------------------
[GDeliveryClient]
type = tcp
port = 29100
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 1048576
obuffermax = 1048576
tcp_nodelay = 0
accumulate = 268435456
[GProviderServer1]
type = tcp
port = 29301
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 1048576
obuffermax = 1048576
tcp_nodelay = 0
accumulate = 268435456
[GProviderServer2]
type = tcp
port = 29302
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 1048576
obuffermax = 1048576
tcp_nodelay = 0
accumulate = 268435456
[GProviderServer3]
type = tcp
port = 29303
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 1048576
obuffermax = 1048576
tcp_nodelay = 0
accumulate = 268435456
[GProviderServer4]
type = tcp
port = 29304
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 1048576
obuffermax = 1048576
tcp_nodelay = 0
accumulate = 268435456
[GFactionClient]
type = tcp
port = 29500
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 1638400
obuffermax = 1638400
tcp_nodelay = 0
accumulate = 268435456
[LogclientClient]
type = udp
port = 11100
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 65536
obuffermax = 1048576
accumulate = 1048576
[LogclientTcpClient]
type = tcp
port = 11101
address = 10.0.2.15
so_sndbuf = 65536
so_rcvbuf = 65536
ibuffermax = 65536
obuffermax = 1048576
accumulate = 1048576
[Threadpool]
threads = <1,3><****1><****1><0,1>
max_queuesize = 1048576
prior_strict = 1
:?:
Erk...sorry!!:rolleyes::rolleyes: my mistake...Quote:
Originally Posted by asreinna
Actually '127.0.0.1' is '10.0.2.15'...i make a mistake there...
Ur glink is correct it seems...
but based on ur ip...i want to ask something? Do u use dynamic IP?
You can't use your IP because it's probably a dynamic IP...so to make things easy just use hamachi....
@asreinna
what version of your server?
version 1.3.6 from sofag/szaer/totoman releaseQuote:
Originally Posted by shockwav3
I searched for those files...(the sofag ones) didnt find anything....even went to the website...all links are dead. So....I officially surrender. I have a gazillion server files..colinex, vmware, you name it...but I'm giving myself a migrain trying to set this up.Quote:
Originally Posted by asreinna
Uggg. If someone wants to be a hero and help me (via messenger) it sure would mean alot.
There is no server 1.3.6 it's just a "tag"
It's modded 1.2.6 old server files (chinese) with 1.3.1 client files so it be called 1.3.6 for convenience...
All servers are the sames.. but every people have do some mod's on the originals files.
if 1.3.6 eng server didn't exist yet, then, what may be the solution for skillbook bugs?
i tried higher client from RU and CN skillbook works but, the language isn't english..
The language is not defined by the server. Only from client.
Check files in 'configs.pck' and try to replace the following files by english files from an english 'configs.pck':
List of the files to be replaced:
Code:fixed_msg.txt
item_ext_desc.txt
item_desc.txt
item_ext_prop.txt
task_err.txt
server_error.txt
skillstr.txt
buff_str.txt
also the interface.pck ones
maps in the surfaces ...and so on
@Romulan
@kristkos
you mean guys by this you've said i can fix the skillbook to work properly?
skillbook bug...im not yet encounter this problem...can give me details to this error?
i cant learn skillbooks of heaven/hell, though i can learn some skillbooks from low level skills(like tiger strike, lions roar) but on doom skills i cant learn them (like flaming dragon, backthrust etc).
Did you have the daimon(dark/purple) or fairy(pure white) level3 on your char?
@Romulan
of course yes! ^_^, do you have solution for this? thanks in advance