i need help some people already want to play on my server and not as set ips agradesco them please help me
Printable View
i need help some people already want to play on my server and not as set ips agradesco them please help me
Please use search button..
We all have to use it and some time or another.
Here is a post among many tips for you.
There is many guides and so much information on this site its amazing...:rolleyes:
Chumpys Guides
http://forum.ragezone.com/f459/my-collection-545201/
Quote:
Originally Posted by archangel1969
in these guides are as set wan ips?
I will be putting the configuration of the ips please search the forum and found nothing and I'm not entangled as configured in wan and what if please help me will thank you:blush:
if your using chumpys 2.5 server repack you will in cabal_config or type cabalhelp youll see how it so easy to configure wan ip.
please tell me how to configure ips estoi I wan wondering if it's easy or just want to tell me so and so is being told is configured as you do not help me in anything you do not understand me I know it's easy but the configuration is urgent :?:
Will you at least LOOK at the options in cabal_config. My script will work out the IP and configure the server for you, in fact the only thing you need to do other than accepting the defaults is to enter your MSSQL server details.
As for saying you searched for forum and found nothing what about...
This sticky:
http://forum.ragezone.com/f451/commo...d-faqs-469775/
This guide:
http://forum.ragezone.com/f460/a-bas...e-etc-545188/#
These guides:
http://forum.ragezone.com/f460/dead-...ack-v2-444970/
ALL of those explain how to do it the manual way if you insist on ignoring the advice my configuration script offers or your centos DNS is borken because you ignored that bit of the setup guides. One is even a "FAQ" sticky which should have been the very first thing you read.
chumpy not understand this part if you want people to connect to the IP address and AddrForClient == in the / etc / full / files WorldSvr_XX_YY.ini that file is that? WorldSvr_01_01.ini that this is the file? which there must be wan ips?? all? or just have AddrForClient wan ip 127.0.0.1 and the rest? I do not understand that in the other part when it says the installation script means to enter into the putty and type the command cabal_config put there in the first wan ip which ip connect says: there has to be wan??? the other hand the file / etc / odbc.ini must have the server ip MSSQL database that is the ip of windows??? and says the network if you have one do not understand, wan if he does not understand is wan or the lan??? als and when he says all other ip address must be 127.0.0.1 which refers to? the client must have internal.txt the wan ip is the wan ip numbers or letters for example? oxioncabal.no-ip.org or 145.167.1.24? I do not understand those parts please explain
I cannot put this into simpler words. You clearly know nothing about networking and nothing i can say will change that.
1. STOP trying to configure things yourself, you clearly don't understand what you are doing.
2. READ what i posted before.
When you run cabal_config IT WILL AUTOMATICALLY DETECT THE RIGHT IP FOR YOU. YOU DO NOT NEED TO CHAMGE ANYTHING. What part of this statement requires more questions about IP addresses??
If it can't detect the IP then your config is wrong and you need to follow the guide on how to add a working DNS server.
When it asks for the mssql IP every single guide clearly states you enter the windows LAN IP.
DO NOT edit ini files yourself as the problem is clearly you editing things you do not understand.
show photos of what I do not understand chumpy to guide me please
http://img35.imageshack.us/img35/927...iguracion1.jpg
AddrForClient ip wan?? and all 127.0.0.1?
http://img391.imageshack.us/img391/4...iguracion2.jpg
IPAdress wan??
http://img256.imageshack.us/img256/2...iguracion3.jpg
IP player will connect to wan?? numeric ip or letters cabal.no-ip.org?
http://img35.imageshack.us/img35/705...iguracion4.jpg
Enter MSSQL server ip local ip ??? or wan ip of windows? numeric or letters? cabal.no-ip.org
http://img256.imageshack.us/img256/7...iguracion5.jpg
Wan ip numeric or windows or Letters cabal.no-ip.org? or ip local or windos???
http://img34.imageshack.us/img34/732...acionfinal.jpg
cabal internal.txt ip wan numeric or cabal.no-ip.org or letters
Please guide me that I set before if it was not bad but I think that seemed off was getting bad so I want you please guide me friend chumpy want your photos put me or tell me how you configure please help:?:
Will you stop going into config files. You do not need to edit anything yourself.
http://img35.imageshack.us/img35/705...iguracion4.jpg
"Do you want me to find your WAN IP? [Y] : N"
Why are you doing this?? The script is trying to find the right IP for you and put it in the right places. It does this specifically because you don't know what to put and i added that feature specifically so i dont have to have this exact conversation with everybody who doesn't know how a network works. You should say Yes here and it will set the IP addreses for you. If if errors instead of ignoring the problem you should fix it by adding a working DNS server in the centos network config.
As for the MSSQL serevr IP it's the windows IP which is what the guides tell you.
You do no need photos to understand anything you just need to follo the instructions i gave you 3 posts ago and let the server work out it's own config. You do not need to edit any file youself, not even one.
which ips then as you have your set up your server as you got wan thus guide configured to place your configuration so please put me in wan guided like I just want to be guided by not configure them so as you put pictures to help me ip and tell me you put on each side?
?:?:
I'm telling you that you do not need to know the wan ip and you don't need to enter it anywhere. Please stop ignoring what i tell you. Tell it to find your wan ip, do this:
"Do you want me to find your WAN IP? [Y] : Y"
That is all you need to do. Nothing more. I have already told you that the mssql ip is the windows one.
I have been repeatedly telling you what you need to do to make it work for 2 whole days now. Will you please just do it.
my configuration is when I ask "Do you want me to find your WAN IP [Y]: Y"
And I put the ip and wan detected
ip in MSSQL you leave the windows, in AddrForClient IPAddress = and = in the / etc / full / WorldSvr_XX_YY.ini you leave the wan ip. in / etc / odbc.ini you leave all the IP of the windows. in all other 127.0.0.1 in the configuration of Customer internal.txt you leave the wan ip that configuration that I have this correctly configured?:?:
I have a question when the server is in wan get in to play with the wan internal.txt on the same server pc? or you can not play on the same computer as I do to enter the same computer server to play wan? ok?
--------------------------------------------------------------Quote:
Originally Posted by noname12
You need to have the correct ports open and set your internal text in client your wan IP. Chumpy program is so easy a 5 year old can set it up, just follow what the setup asks how hard can it be. You need to understand basic networking. If you cant figure this out dont even bother setting up a server..
Please stop fustrating developers, And listen to what they are telling you, english is and has been the universal language for quite a while, please just follow the guides and what you are being told. :rolleyes: