Printable View
Is there any way to increase drop rate item from a monster and boss???
I only know to type nano_/home/gamed/ptemplate.conf... but there is no drop rate item setting.
Is there anyone can tell me any command that i can type to modify some drop rate??
Thx.:D:
Sorry for my bad english, correct me if i say a bad word... i realy dont mean it.:ehh:
YOURUSERNAME/pwserver/gamed/ptemplate.conf
:rolleyes:Code:[GENERAL]
logic_level_limit = 150
;allow_login_class_mask = 247
allow_login_class_mask = 255
exp_bonus = 500 # EXP RATE
drop_bonus = 500 # DROP ITEM RATE
money_bonus = 500 # DROP GOLD RATE
sp_bonus = 500 # SKILL POINT RATE
Thx for fast reply.:thumbup:
(YOURUSERNAME/pwserver/gamed/ptemplate.conf)
My user name? username that i use for login? or my character name?
I already use my id login, character name, and server name in ur format. but i don't see any word like u say.:*:
when i type it, it just say:
-bash: username/pwserver/gamed/ptemplate.conf
but when i type:
nano_/pwserver/gamed/ptemplate.conf
i got a blank black:scared:
and started again with text:
[root@Fedora ~]#
For advance information i use xampp and mssql server.
:blushing: hope you have some solution.
did you use colinux?
I think it should work with this command:
If not, try this one:Code:nano /root/pwserver/gamed/ptemplate.conf
Code:nano /home/gamed/ptemplate.conf
Yeah i use colinux!
Umph,... in my first post i say: i already know about type
nano /home/gamed/ptemplate.conf.... but the drop rate bonus didn't give me some good item like 3 star equipment:?:
Even if i set the drop_bonus = 500!:*:
What is the max number? so the monster will be drop some good item.
Or is there any other command that i can use to get some item, even item mall.:P:
Thx, i realy like this forum coz ur' fast replay.:thumbup::thumbup:
the drop rate of 3stars equipement is defined in the elements.data not in the ptemplate.confQuote:
Originally Posted by Gearsecond
I suggest you a maximum of 999999. Because you may crash your server if you did more.
Nope. There is no GM command to spawn item in your inventory. You must use iweb to put the XML code of the item in your char's XML.
I suggest u use iweb...Quote:
Originally Posted by Gearsecond
Hoo, :*: too bad:P:
Humph,...thx for the information, it's realy helpfull.
iweb?? what is that? can u tell me?? i use batgm.exe, to give my charcter coin.(Buy some item mall, Even my item mall is crash:*: just a few item i can buy:ehh:)
is that what u mean??:?:
Like Romulan says: "the drop rate of 3stars equipement is defined in the elements.data not in the ptemplate.conf"
So,can the elements.data be rise up?? the drop rate for the item, thats what i mean.:P:
For more information, i only play this game with my family^^ 2-7Player... I like edited something sometimes, like i already did in RO before i play this game.
Thx..
the drop rate does not have much effect, its best to enable the "double drop" through iweb which makes each monster drop twice as many items.
iweb is an online GM web interface and you can get this interface at
http://YOURPWSERVER:8080/iweb
It used for manage your server and your char's DB.
Note: you must see this message in your colinux console to be sure that iweb is running up,
http://img689.imageshack.us/img689/2305/iweberr.jpg
---
Are you sure? Did you have test theses functions?Quote:
Originally Posted by rbb138
I never see differences when i used theses functions... :glare:
iweb 'double drop' not working for my server...or may b its working but i cant seem to differentiate the different
Humph,... diffrent version of server couse diffrent respon for type that command maybe?:?:
"Romulan Says; iweb is an online GM web interface and you can get this interface at
http://YOURPWSERVER:8080/iweb
It used for manage your server and your char's DB...."
YOURPWSERVER??? What should i type? I realy dont understand:*:
Should i type it nano? or something else??
Like i said before, The server n client i bought it form someone:huh:
,... n i realy-realy don't know what to do:mellow:,... couse this is my first time i use colinux!:*:
i only know to type my ip address in internet explorer like this one (to add some coin for item mall)
192.168.0.1,... and this is for registry new id.
192.168.0.1/pwuweb,... put id GM and we can give some id or all id some coin. Is this web that u mean??? n in what coloum should i edited?
Can u explain it more detail?:?:,.. sorry couse you some trouble,... thx guyz.:D::thumbup:
Try this command in your console:
It will show you a message like this:Code:ifconfig
Look for the line:Code:root@pwserver:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.0.200 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::211:2fff:fe23:f3be/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:388 errors:0 dropped:0 overruns:0 frame:0
TX packets:447 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:31319 (30.5 KB) TX bytes:63138 (61.6 KB)
Interrupt:16 Base address:0x9800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21774 errors:0 dropped:0 overruns:0 frame:0
TX packets:21774 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1223803 (1.1 MB) TX bytes:1223803 (1.1 MB)
root@pwserver:~#
This is mine but it should be different for you...Code:inet addr:192.168.0.200
To got iweb page --> http://THE-INET-ADDR:8080/iweb
And to get connected and play to your server, you must use the same ip (THE-INET-ADDR) in the serverlist.txt on client side.
You must need to configure the gamesys.conf in the glinkd folder too with the same ip (THE-INET-ADDR),
Code:nano /home/glinkd/gamesys.conf
Atfer edit your file, press CTRL+X, (Y) and finally ENTER :P:Code:[GLinkServer1]
type = tcp
port = 29000
address = (THE-INET-ADDR) (i.e: 192.168.1.50)
so_sndbuf = 12288
so_rcvbuf = 12288
ibuffermax = 16384
obuffermax = 65536
tcp_nodelay = 0
listen_backlog = 10
accumulate = 131072
max_users = 3000
halflogin_users = 6000
sender_interval = 200000
accumu_packets = 32768
mtrace = /tmp/m_trace.link
compress = 0
close_discard = 1
urgency_support = 1
version = 10301 (check here to be sure that the version is 10301 if not you must write it and save the file)
ifconfig.... Its work!
inet addr:10.0.2.15,... thats my inet addr.
serverlist.txt on client side 192.168.0.1
in glinkd (nano /home/glinkd/gamesys.conf)my inet addr is 192.168.0.1!
So i rename serverlist.txt to 10.0.2.15 and in glinkd too.
But when i type http://10.0.2.15:8080/iweb i don't enter anything. like i lost my connection... i try to enter my server n play, but it couldn't.:*:
So i put it back too 192.168.0.1...
i haven't try to edit ifconfig, coz i dont know how to edit it.
:*:
Umph may i asku u guys what is iweb???:?: what could i do in there??
Many2 thx, for answering my question, even in my bad english.:D::P:
crapy colinux...:thumbdown: i never use it... so i can't help you a lot about it.
Iweb:
It's a java web based interface for manage the server and the char's db (and many ohter things). It run on apache tomcat.
Examples of features:
- Reboot the server
- Send broadcast message (red message) without to be ingame
- Forbidding some ingame options
- Get role list of a user in the DB server.
- Changing information of a role.
- Input items and equipement directly in the xml of your role
- ...
Use hamachi and see...
U use modem + router rite?
Thx Romulan, its realy helpfull:D:
Nice forum:thumbup:
Umph,...
Should i update something?? so my item mall can be fixed?
Maybe i should make New topic about update my server n client... Hope u guyz annoyed with my question>.<,...
Yeah i Use modem n router. My i know why?
dynamic ip address not work...pls use static ip address...
What is it dynamic ip address:?:
and what is static ip address:?:
Explaination plz:*:...i realy don't know much about ip address, I just know that to LAN Some comp we should use 192.168. ...... so it can be connected.
Thx
dynamic ip is deliver by the dhcp server on your router to any PC on your network
static ip is manually defined by you!
Hoo, so what should i write in serverlist.txt on client and anyother file that have ip address? should i leave it alone... or should i edited with any numbers?:?::?:
i don't know exactly what is the external interface for colinux
and i don't know how colinux get connect to the MSSQL server on your windows OS
so
i don't know what ip need to put in the serverlist.txt and what ip/host name must go in the table.xml and hosts to get colinux connected to the MSSQL server.
I don't like colinux so i can't help you a lot on this soft
Hahaha,... yeah me to... Thx for ur advise until now, U're big help for me:thumbup:
Your advise at my other thread discussion is needed too:P:
For now on i just want to fix my item mall so it can work properly, can u give your advise,... what should i do for the first time, and what should i do next?:?:
If there anyone who can give some input about drop item, i realy greatfull,... i'll be check this thread every day:D:
thats y i say use hamachi...
i also use colinux n hamachi coz im also using dynamic ip...
:(: Don't Understand What u are talking guyz:laugh: Thx for the input,.. if u have some times can u make some guide with picture?:): Thats will be the best help for us who is Newbie in this things.:P:
Thx:):
¤ The Complete PW Package ¤ - RaGEZONE forums I made my server with that and I don't have any clue on how to change the rates. Can someone help me?
The same exact way as any other release, or, just as this thread ALREADY says...
(epic necro btw, but at least that means you may have been reading/searching?)