Tutorial: How to use no-ip duc!! With pictures!!!

Tutorial: How to use no-ip duc



Step1: Register an Account

Go to website of No-IP.
http://www.no-ip.com/

http://i42.tinypic.com/1z23ecl.jpg

and click at Create Account.

Fill out all that emty fields, so that you can register.

http://i39.tinypic.com/zyh55v.jpg

I'm not realy shure what follows now, but I think you receave an email
with an activation-link in it.
Follow all that to activate your account and after that continue with Step2.


Step2: Create a Host

Click at "Hosts/Redirects"

http://i44.tinypic.com/2moxjky.jpg

(The two hosts are just because I allready use two)

and then at "add a Host"

http://i42.tinypic.com/23ie9nd.jpg

Now just fill in the red-marked fields.
The hostname can be anything wich is still availible. most prefered is a host like " *****.no-ip.org "
Then click at "Create Host" at the right-bottom corner.

http://i39.tinypic.com/14cya6c.jpg

That's it. He have finished with wesite stuff.

Step3: Install No-ip duc

Fist, start your server and login as root.

Than tipe in: " apt-get install no-ip "

http://i41.tinypic.com/2ch965j.jpg

The installer starts and guides you throught.
At first you have to insert your No-IP.com user name.
(NOT the Hostname)

http://i39.tinypic.com/2m26zj5.jpg

The Password

http://i44.tinypic.com/35lua29.jpg

The updating intervall. All 30 minutes is all right.

http://i43.tinypic.com/347txqb.jpg

List of hosts or groups. if you just use one host you can leave this field emty.

http://i43.tinypic.com/xpakvs.jpg

Network device name, can be left like it is.

http://i39.tinypic.com/15mg192.jpg

and that as well.

http://i43.tinypic.com/a4xuki.jpg

That was the installation!!!

http://i41.tinypic.com/20r93xk.jpg

reboot your server and your done with that.

The only thing you need now, is to open the port 80 for your serverip (hrace009 release=192.168.0.10)

If you have followed all that you have now a public server !!!


Attention: You can't test if your server is availible at that Host name, because it is your public ip.

When I type apt-get install no-ip, it says 'Couldn't find package no-ip'?

wich linux do you use?

I use hrace009's server, it's Ubuntu I think.

That's strange. I used the hrace009 release to make this tutorial.

http://i43.tinypic.com/1z6u8p.jpg

Hmm it's my vbox, I tried the apt-get command a couple of times with wine etc. and it said the same thing. Time to mess around with the configuration.

try it with "apt-get install noip2"

Nope that doesn't work either. :(

no-ip is in the universe repositories.
to enable the repo edit the source.list:

Quote:

---

sudo nano /etc/apt/sources.list

---

un-comment the univers repos.
(remove the #)
example:

Quote:

---

## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
#deb http://XY.archive.ubuntu.com/ubuntu/ gusty universe
#deb-src http://XY.archive.ubuntu.com/ubuntu/ gusty universe
#deb http://XY.archive.ubuntu.com/ubuntu/ gusty-updates universe
#deb-src http://XY.archive.ubuntu.com/ubuntu/ gusty-updates universe

---

change to:

Quote:

---

## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://XY.archive.ubuntu.com/ubuntu/ gusty universe
deb-src http://XY.archive.ubuntu.com/ubuntu/ gusty universe
deb http://XY.archive.ubuntu.com/ubuntu/ gusty-updates universe
deb-src http://XY.archive.ubuntu.com/ubuntu/ gusty-updates universe

---

then try:

Quote:

---

sudo apt-get update
sudo apt-get install no-ip

---

My printscreen doesn't work for some reason, but the repos were already uncommented, and when I typed sudo apt-get update, it gave a lot of 'failed to fetch' errors.

sry, i can't help you =(

No problem, thanks for trying. I'll figure it out somehow, I always do.

hmm ...
maybe in the / etc / resolv.conf error check back again ..
or try to ping from your Vbox to your router or modem if I can ..?
Vbox IP check with your current IP Computer use
maybe this can help
or maybe you can be patient waiting for me to upload a version of Vmware server hrace009

Sure I can wait no problem.
My problem is that vbox can't connect to the internet at all, and I assume the no-ip package has to be downloaded from there. I used all 4 possible network configuration options but none of them work so far.

Quote:

---

Originally Posted by Exodus

Sure I can wait no problem.
My problem is that vbox can't connect to the internet at all, and I assume the no-ip package has to be downloaded from there. I used all 4 possible network configuration options but none of them work so far.

---

I once swore natural Vbox version hrace same server with which you feel ..
so I tried to change it in Vmware version ..
and already I test run normally, but I have not tried to make it a public IP, in because the modem I use is not adequate ..
I uploaded a new job 10% walk .. possible until 3 days
I can share a new link
:blushing:

hemmer...
it say could not get the package no-ip

ok let tell me what u do after u register?
download??
and put it where?
give the detail after u register host:):

If you use "apt-get" you don't have to download anything.

Wich distribution do you use?

i use this lol

http://forum.ragezone.com/f452/vbox-...-items-650130/

i type apt-get install no-ip

the is an error and i open the sudo nano /etc/apt/source.list ( same as what u guide )
there's empty..
and i press the apt-get update and got many error

that's misterious, because that Vbox release I used for my Guide.
Do you have a internetconnection with that virtual machine anyway?

what do u mean my interconnection??

ok i follow this step...

1st. download the img..
2nd. download VBox..
3rd. Install Vbox
4th. open the img using Vbox..
5th. setup the Vbox with the 192.168.0.10
6th. start
7th login ID : root Pass: hrace009
8th type : apt-get install no-ip
9th. it say cannot find the package:blink:

hello???:?:

Quote:

---

Originally Posted by exrazin

hello???:?:

---

I read your last posts and it seems you need some basic knowledge about network configuration first (i.e. how is a virtual machine connected to your current network (bridged, host adapter, ...))

If you want to connect a virtual machine to the internet, you must configure VBox network settings correctly to fit your network infrastructure...

I think nobody can answer this, cause you can't tell us about your network infrastructure configuration

Looks like I'm not the only one who has that problem. I tried all possible network configs for Vbox but apt-get update fails and it says package not found. Don't know what else to modify.

i think its the package: " noip2 " -> http://packages.ubuntu.com/karmic/noip2 [ Quellcode: no-ip ] configuration are the same i think

Code:

---

sudo apt-get install noip2

---

Quote:

---

Originally Posted by exrazin

what do u mean my interconnection??

ok i follow this step...

1st. download the img..
2nd. download VBox..
3rd. Install Vbox
4th. open the img using Vbox..
5th. setup the Vbox with the 192.168.0.10
6th. start
7th login ID : root Pass: hrace009
8th type : apt-get install no-ip
9th. it say cannot find the package:blink:

---

here open your Network Connection, and see pic above:

Spoiler:

http://img541.imageshack.us/img541/3415/79385497.jpg

don't forget to turn on your Firewall

Quote:

---

Originally Posted by ronny1982

I read your last posts and it seems you need some basic knowledge about network configuration first (i.e. how is a virtual machine connected to your current network (bridged, host adapter, ...))

If you want to connect a virtual machine to the internet, you must configure VBox network settings correctly to fit your network infrastructure...

I think nobody can answer this, cause you can't tell us about your network infrastructure configuration

---

ronny.. i got this

Network
Adapter 1:

Intel PRO/1000 MT Server (Host-only adapter, 'VirtualBox Host-Only Ethernet Adapter')


how was that

Quote:

---

Originally Posted by exrazin

ronny.. i got this

Network
Adapter 1:

Intel PRO/1000 MT Server (Host-only adapter, 'VirtualBox Host-Only Ethernet Adapter')


how was that

---

I dont't know if it is possible to share the internet connection in Host-Only Mode. I'm using Bridged Mode, but you need a router for this...

Quote:

---

Originally Posted by hrace009

here open your Network Connection, and see pic above:

Spoiler:

http://img541.imageshack.us/img541/3415/79385497.jpg

don't forget to turn on your Firewall

---

ok i followed as u told..
but still say couldnt find the package no-ip

Quote:

---

Originally Posted by exrazin

... but still say couldnt find the package no-ip

---

omg -> first site -> last post -> http://forum.ragezone.com/f452/tutor...ctures-653514/

im having the same problem as exrazin so i followed all directions so far. pls help us lol

check /etc/udev/rules.d/70-persistent-net.rules
and delete eth1
and change eth0 to
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

and use bridged mode.
But just if you have a router!!!

still cant find the no-ip it says

http://www.no-ip.com/downloads.php

is thre other way to make the server online???

i using modem.. not router..

so... got other way so that modem also can make server online??:mellow:

hey why u delete the tutorial... i just finish update lol..
apt-get update lol
i did it..
i just wanna the tutorial after we press apt-get install no-ip

Hehe! Hello everybody!

I have made a tutorial for NO-IP in the past xD

Then, i refresh the post here:

Quote:

---

Originally Posted by Romulan

1. Go here: http://www.no-ip.com
2. Register an account...
3. Login in and [Add host]
4. Let the default configuration, you just need to type a name (ie: mydomain.no-ip.biz)
5. Download the client and connect with your account
6. Just let the no-ip client to retrieve your sub-domain list...

Now you can have a static external access for your server with your dynamic dns!

In the serverlist.txt for your client, you need to put your domain.

example:

Code:

---

my pwserver    29000:mydomain.no-ip.biz  1

---

(the space are made with the Tab key and not the Space key!)

note:
don't forget to make a shortcut of NO-IP DUC in your Start menu of windows!

otherwise, your players will be not able to access on your server if you forget to run the NO IP client! :wink:

---

Quote:

---

Originally Posted by Romulan

Hehe! Hello everybody!

I have made a tutorial for NO-IP in the past xD

Then, i refresh the post here:

---

so..
which ip should we put at the no-ip host??
how to make it connect to VBOX?

I am having a bit of trouble enabling internet in my virtual box.

my vbox config is this
http://i790.photobucket.com/albums/y.../vboxipnew.jpg
http://i790.photobucket.com/albums/y...oxsettings.jpg
and internet connection sharing is enabled
http://i790.photobucket.com/albums/y...netsharing.jpg

I am running this on a Windows Vista on a router.
I cant seem to get internet access and pinging outside ips says host is unreachable.
pinging my host ip takes forever and doesnt return anything.

any help would be appreciated thx. :):

edit the subnet mask of vbox is 255.255.255.0 idk why it was set to 255.255.0.0 like in the screenshot.

what comes when you tipein "ifconfig"?

---------- Post added at 08:45 PM ---------- Previous post was at 08:43 PM ----------

if you have a router change your connection type to "bridged mode"

I am already using bridged mode as shown in the screenshot. I did have it set up before with windows bridging but I dont know if I had internet access then either.

anyway here is what I get when I type ifconfig
http://i790.photobucket.com/albums/y...1/ifconfig.jpg

three things:

eth0 started: yes

bridged mode(if you have a router): yes

corect ip type: your pwserver requires 192.168.0.0 networks.
what are your windows ip's like?
if they are like 192.168.178.x then you have to change your
server ip.

Quote:

---

Originally Posted by Drakaer

I am having a bit of trouble enabling internet in my virtual box.

my vbox config is this
http://i790.photobucket.com/albums/y...er1/vboxip.jpg
http://i790.photobucket.com/albums/y...oxsettings.jpg
and internet connection sharing is enabled
http://i790.photobucket.com/albums/y...netsharing.jpg

I am running this on a Windows Vista on a router.
I cant seem to get internet access and pinging outside ips says host is unreachable.
pinging my host ip takes forever and doesnt return anything.

any help would be appreciated thx. :):

edit the subnet mask of vbox is 255.255.255.0 idk why it was set to 255.255.0.0 like in the screenshot.

---

change your IPv4 Network Mask to 255.255.255.0 coz at VBOX have mask 255.255.255.0 if you wan to connect with your VBOX you must use the same Net MASK:wink:

I did that already. I put it at the bottom of my post I just didnt update the picture. I have updated the picture now however.

thx anyway.

Im gonna try windows bridging again
i can ping my router but when i try and ping outside like google
it doesnt return anything. It doesnt return thats its found it or that it couldnt find it. It just keeps searching.

Quote:

---

Originally Posted by Drakaer

I did that already. I put it at the bottom of my post I just didnt update the picture. I have updated the picture now however.

thx anyway.

Im gonna try windows bridging again
i can ping my router but when i try and ping outside like google
it doesnt return anything. It doesnt return thats its found it or that it couldnt find it. It just keeps searching.

---

change your VBOX Network Interface /etc/network/interfaces

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address YOUR VBOX IP
netmask YOUR NETMASK
network 172.16.0.0 <<< Always Fill This XXX.XXX.0.0
broadcast YOUR NEWORK BRODCAST
gateway YOUR GATEWAY IP TO INTERNET
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers YOUR DOMAIN IP, IF YOU USE DOMAIN
dns-search YOUR DOMAIN NAME, IF YOU USE DOMAIN

-----------------------------------------------------------------
and don't forget to Replace the IPs with your current addresses except the lines with 0.0.0.0

/PWServer/gacd/gamesys.conf
/PWServer/gamed/gmserver.conf
/PWServer/gamed/gs.conf
/PWServer/gamed/gsrollback.conf
/PWServer/gamedbd/cashstat.conf
/PWServer/gamedbd/gamesys.conf
/PWServer/gdeliveryd/gamesys.conf
/PWServer/gfactiond/gamesys.conf
/PWServer/glinkd/gamesys.conf
/PWServer/logservice/logservice.conf
/PWServer/uniquenamed/gamesys.conf
/etc/authd.conf
/etc/gmopgen.xml
/etc/GMserver.conf
/etc/hosts
/etc/iweb.conf

I am using you virtualbox server.

here is my current interfaces
http://i790.photobucket.com/albums/y...interfaces.jpg

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.10 this is right
netmask 255.255.255.0 this is right
network 192.168.0.0 I assume this is right cos it the network Im on.
broadcast 192.168.0.255 Im guessing this is right
gateway 192.168.0.50? <~ here do i put my router ip since it is my gateway for my host pc?
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.50? <~ not quite sure what to put here. Im guessing nothing since I dont have a domain name. or do I put my gateway here which is my router ip?
dns-search YOUR DOMAIN NAME, IF YOU USE DOMAIN

Im not to good when it comes to networking.
thx for the help.

---------- Post added at 11:18 AM ---------- Previous post was at 10:21 AM ----------

Quote:

---

Originally Posted by hrace009

change your VBOX Network Interface /etc/network/interfaces

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
address YOUR VBOX IP
netmask YOUR NETMASK
network 172.16.0.0 <<< Always Fill This XXX.XXX.0.0
broadcast YOUR NEWORK BRODCAST
gateway YOUR GATEWAY IP TO INTERNET
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers YOUR DOMAIN IP, IF YOU USE DOMAIN
dns-search YOUR DOMAIN NAME, IF YOU USE DOMAIN

-----------------------------------------------------------------
and don't forget to Replace the IPs with your current addresses except the lines with 0.0.0.0

/PWServer/gacd/gamesys.conf
/PWServer/gamed/gmserver.conf
/PWServer/gamed/gs.conf
/PWServer/gamed/gsrollback.conf
/PWServer/gamedbd/cashstat.conf
/PWServer/gamedbd/gamesys.conf
/PWServer/gdeliveryd/gamesys.conf
/PWServer/gfactiond/gamesys.conf
/PWServer/glinkd/gamesys.conf
/PWServer/logservice/logservice.conf
/PWServer/uniquenamed/gamesys.conf
/etc/authd.conf
/etc/gmopgen.xml
/etc/GMserver.conf
/etc/hosts
/etc/iweb.conf

---

Thx hrace it worked :thumbup1:

---------- Post added at 11:33 AM ---------- Previous post was at 11:18 AM ----------

I get replys when i ping external site like google but I still cannot find the no-ip package or update apt-get :blink:

Quote:

---

Originally Posted by Drakaer

I am using you virtualbox server.

here is my current interfaces
http://i790.photobucket.com/albums/y...interfaces.jpg

# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.10 this is right
netmask 255.255.255.0 this is right
network 192.168.0.0 I assume this is right cos it the network Im on.
broadcast 192.168.0.255 Im guessing this is right
gateway 192.168.0.50? <~ here do i put my router ip since it is my gateway for my host pc?
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.50? <~ not quite sure what to put here. Im guessing nothing since I dont have a domain name. or do I put my gateway here which is my router ip?
dns-search YOUR DOMAIN NAME, IF YOU USE DOMAIN

Im not to good when it comes to networking.
thx for the help.

---------- Post added at 11:18 AM ---------- Previous post was at 10:21 AM ----------




Thx hrace it worked :thumbup1:

---------- Post added at 11:33 AM ---------- Previous post was at 11:18 AM ----------

I get replys when i ping external site like google but I still cannot find the no-ip package or update apt-get :blink:

---

try to search at this treath, i see someone already post it, but i forget where is it :mellow:

Fixed :thumbup1:
I can now access the ubuntu repositories.
the problem was i needed to change the ip in my /etc/resolve.conf
to the ip of my router

thx for the help :laugh:

---------- Post added at 02:26 PM ---------- Previous post was at 01:42 PM ----------

I now have no-ip installed and have a domain name for my ip but when i ping myself i get no response. I would say this has something to do with my router itself. Is there anything you can recommend I change to allow my router to respond to the outside world.

thx

I can ping my router and get a reply yet still cant connect from outside

Thanks everyone I have a working public server now.
I just needed to open the ports on my router and it works now. :):

Quote:

---

Originally Posted by Drakaer

Thanks everyone I have a working public server now.
I just needed to open the ports on my router and it works now. :):

---

okay, i read the whole topic.. but something is still not clear for me
now i made a no-ip acc and have now an ip and domainname.
now,
its
http://legacypw1988.zapto.org/
95.113.195.111


winscp to server:
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255 <<< change her to 95.113.195.111??
gateway 192.168.0.50 << and here?
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 95.113.195.111 << right?
dns-search http://legacypw1988.zapto.org/ <<< right?

and which port do u open in ur router?
i also use a router

interface change = nothing ! you have a router than portforwarding to you local IP on port 29000 - your ProviderIP / online is refreshed in your no-ip acc --- which Router you have ?

---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------

btw

address 192.168.0.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.1 <- comes from /etc/resolved.conf

Quote:

---

Originally Posted by unkownzh

okay, i read the whole topic.. but something is still not clear for me
now i made a no-ip acc and have now an ip and domainname.
now,
its
http://legacypw1988.zapto.org/
95.113.195.111


winscp to server:
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255 <<< change her to 95.113.195.111??
gateway 192.168.0.50 << and here?
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 95.113.195.111 << right?
dns-search http://legacypw1988.zapto.org/ <<< right?

and which port do u open in ur router?
i also use a router

---

Your interfaces reflects your network configuration. If your vbox is connected to your router it is correct and does not need changing.

Have you installed no-ip on vbox?

Code:

---

apt-get noip2

---

Basically you only need to Register a domain name, establish internet in vbox and install and setup no-ip.

Quote:

---

Originally Posted by unkownzh

okay, i read the whole topic.. but something is still not clear for me
now i made a no-ip acc and have now an ip and domainname.
now,
its
http://legacypw1988.zapto.org/
95.113.195.111


winscp to server:
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255 <<< change her to 95.113.195.111??
gateway 192.168.0.50 << and here?
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 95.113.195.111 << right?
dns-search http://legacypw1988.zapto.org/ <<< right?

and which port do u open in ur router?
i also use a router

---

Broadcast -- No change
Gateway -- Should = your routers exact IP address

on your router you are going to want to forward the following ports:

29000 for the game itself
80 if you want people from the WAN side to be able to register or access /opt/lampp/htdocs etc...

Obviously you want to forward both of those ports to the IP of your server, which would appear to be 192.168.0.10 by your example.

Quote:

---

Originally Posted by Drakaer

Your interfaces reflects your network configuration. If your vbox is connected to your router it is correct and does not need changing.

Have you installed no-ip on vbox?

Code:

---

apt-get noip2

---

Basically you only need to Register a domain name, establish internet in vbox and install and setup no-ip.

---

okay, i try to install no-ip on unbutu in vbox since yesterday..
i m very noob in linux system, i dont get it o.o
and my ubuntu in vbox has no internet connection,so i cant do an update or something like this..
is there another way do install noip2? i try it with winSCP copy the install folder into ubuntu, downloaded it from the ubuntu website. but i dont get it...
i follow the readme too but. however, i m very noob with linux o.o
and i follow the instructions to how to make internet in vbox ubuntu.. no success...
i m trying it since 2 days now..

why do you will install no-ip ? " vbox has no internet connection " ?!?

Quote:

---

Originally Posted by fgru

why do you will install no-ip ? " vbox has no internet connection " ?!?

---

ja, hat echt keine verbindung. will das ja online stellen damit freunde drauf zocken können :D hast du vllt icq? XD

Quote:

---

Originally Posted by unkownzh

okay, i try to install no-ip on unbutu in vbox since yesterday..
i m very noob in linux system, i dont get it o.o
and my ubuntu in vbox has no internet connection,so i cant do an update or something like this..
is there another way do install noip2? i try it with winSCP copy the install folder into ubuntu, downloaded it from the ubuntu website. but i dont get it...
i follow the readme too but. however, i m very noob with linux o.o
and i follow the instructions to how to make internet in vbox ubuntu.. no success...
i m trying it since 2 days now..

---

You will need internet connection in vbox.

step 1. Can you ping your router?
Yes goto step 2.
no edit your interfaces to relect your router and make sure you are using bridged mode and try step 1 again.

Step 2. Can you ping and external site?
Yes goto step 3.
no are you sure your interfaces if right and there is no firewalls or anything blocking you.

Step 3. Can you ping the ubuntu repositories?
Yes goto step 4.
no edit you resolv.conf to reflect your router ip

Step 4. Type

Code:

---

apt-get update
apt-get install noip2

---

If all goes successfully no-ip will be downloaded.
Setup no-ip and port forward your router.

Quote:

---

Originally Posted by Drakaer

You will need internet connection in vbox.

step 1. Can you ping your router?
Yes goto step 2.
no edit your interfaces to relect your router and make sure you are using bridged mode and try step 1 again.

Step 2. Can you ping and external site?
Yes goto step 3.
no are you sure your interfaces if right and there is no firewalls or anything blocking you.

Step 3. Can you ping the ubuntu repositories?
Yes goto step 4.
no edit you resolv.conf to reflect your router ip

Step 4. Type

Code:

---

apt-get update
apt-get install noip2

---

If all goes successfully no-ip will be downloaded.
Setup no-ip and port forward your router.

---

a questino in the first step...

this is my interface
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.0.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.0.1

my router ip is http://192.168.178.1/
i change now which line? o.o
sry... i m very noob with linux xD
first time run linux in vbox....

make bridge networking - its better -> you must change all ip to 192.168.178.x -> step 4

---------- Post added at 12:27 AM ---------- Previous post was at 12:21 AM ----------

files are needed new ip -> http://forum.ragezone.com/5602151-post45.html

Quote:

---

Originally Posted by fgru

make bridge networking - its better -> you must change all ip to 192.168.178.x -> step 4

---------- Post added at 12:27 AM ---------- Previous post was at 12:21 AM ----------

files are needed new ip -> http://forum.ragezone.com/5602151-post45.html

---

okay, all files changed to 192.168.178.x
now i test it again

---------- Post added at 10:50 PM ---------- Previous post was at 10:32 PM ----------

Quote:

---

Originally Posted by fgru

make bridge networking - its better -> you must change all ip to 192.168.178.x -> step 4

---------- Post added at 12:27 AM ---------- Previous post was at 12:21 AM ----------

files are needed new ip -> http://forum.ragezone.com/5602151-post45.html

---

okay, i do eveverything what u said,
change all 192.168.0.x ip to 192.168.178.x in every file which needed
and i use bridge connection with my wlan, also active the function which alouds VirtualBox Host-Only Network share the inet connection.
then i start again, i can ping my router, but lose my internet connection, then i ping to the internet.. nothing again :(:






okay, now i can ping to my router, but not to the internet
this is my interface
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.178.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.178.255
gateway 192.168.178.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.178.1

Quote:

---

Originally Posted by unkownzh

okay, all files changed to 192.168.178.x
now i test it again

---------- Post added at 10:50 PM ---------- Previous post was at 10:32 PM ----------



okay, i do eveverything what u said,
change all 192.168.0.x ip to 192.168.178.x in every file which needed
and i use bridge connection with my wlan, also active the function which alouds VirtualBox Host-Only Network share the inet connection.
then i start again, i can ping my router, but lose my internet connection, then i ping to the internet.. nothing again :(:






okay, now i can ping to my router, but not to the internet
this is my interface
# The primary network interface
auto eth0
iface eth0 inet static
address 192.168.178.10
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.178.255
gateway 192.168.178.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.178.1

---

You dont need internet connection sharing on. Try turning it off and see if it helps.

Quote:

---

Originally Posted by Drakaer

You dont need internet connection sharing on. Try turning it off and see if it helps.

---

no, it doesnt help.....

i m deperate now... :wink:

idk with wlan - sry i use cable and works very fine

dns-nameservers 192.168.178.1 -> i this the same of /etc/resolved.conf ? or only in interfaces file

if you have a native linux server with a wlan card you just have to change eth0 to wlan0.
With vBox in bridged mode it doesn't metter if your hostcomputer of the vbox have a cable or wireless connection.

Quote:

---

Originally Posted by Hemer

if you have a native linux server with a wlan card you just have to change eth0 to wlan0.
With vBox in bridged mode it doesn't metter if your hostcomputer of the vbox have a cable or wireless connection.

---

i dont know... because i use VBOX Image PW 1.3.6. with 1.4.2 V 283 items from hrace009.....

it should be the same with urs...

anyone have teamview? XD and is pro with linux?....
:huh:

Quote:

---

Originally Posted by unkownzh

i dont know... because i use VBOX Image PW 1.3.6. with 1.4.2 V 283 items from hrace009.....

it should be the same with urs...

anyone have teamview? XD and is pro with linux?....
:huh:

---

I like that Teamview... thanks for tipping me off to it; now I know how I can help people if I have the time ;)

Quote:

---

Originally Posted by 343

I like that Teamview... thanks for tipping me off to it; now I know how I can help people if I have the time ;)

---

343 help me to solve my problem ;-D

he is really pro in linux

;-)

see you ;)

btw. do u know which line can change the +hp in armors? XD
i only find out which change mdef, pdef, lvl, and so on.. but not the +hp if it is refine...

You already tried with hamachi?
Da to install hamachi on ubuntu?

Sorry for bumping this topic, but I managed to get everything working, except now when I put the IP or hostname in my serverlist.txt, i can't connect to the server. I can ping to it from Vbox, but I get the -- thing in PW and can't connect to it. Does it only work if you have a router? I only have a modem, and I tried opening port 80 but that didn't help either.

Perfect World uses port 29000. Try opening that. Idk if it will work with a modem. Also try a site like http://ping.eu/port-chk and type the ip of your server eg myserver.no-ip.biz and 29000 in the port and see if its open.

Hmm, it's closed. I tried opening it with my firewall but it still shows as closed. How can I open it?

I managed to open it, but I still can't connect. It waits for 40 seconds then disconnects. :(

What Linux is this ?

I have made that Tutorial with the Harace release, cause I think that's the most up to date startingpoint for the most of you.
So it should be Ubuntu 8.04.
I'm not that shure, because i don't have that image anymore.


Hendrik

works with Ubuntu 8.x / 9.x / 10.x - other idk ...

Quote:

---

Originally Posted by Drakaer

Thanks everyone I have a working public server now.
I just needed to open the ports on my router and it works now. :):

---

What ports u opened so ur server can be viewed outside?:glare:

I opened ports 29000 and 8080. I only opened 8080 so that my friend can use pwAdmin. You can get people to register with http://your-ip/pw/register on port 80 which you may need to forward.

Quote:

---

Originally Posted by Drakaer

I opened ports 29000 and 8080. I only opened 8080 so that my friend can use pwAdmin. You can get people to register with http://your-ip/pw/register on port 80 which you may need to forward.

---

What i a irony.. i can ping my server.. but all ports are closed.. and i opened them, and rebooted machine.. it should work..but it's not workign.. :/:

I used this site to test my if my ports were forward properly.
http://ping.eu/port-chk/

I assume you are using bridged mode for your server connected to a router? Did you forward the ports to your server or the host machine (if using vbox)?

Quote:

---

Originally Posted by Drakaer

Did you forward the ports to your server or the host machine (if using vbox)?

---

erm:/:

I use vbox @@

If using bridged mode with vbox forward the ports to your vbox ip not the host. ie forward to 192.168.0.10

Quote:

---

Originally Posted by Drakaer

If using bridged mode with vbox forward the ports to your vbox ip not the host. ie forward to 192.168.0.10

---

I fowarded to 192.168.2.62 bcz my server have that ip adress @@
But funny thing.. before i opened 2900 port i could login..
Now i cant -.-

---------- Post added at 09:28 PM ---------- Previous post was at 08:26 PM ----------

Pff... i enabled firewall in router, put low security and my server is working @@

How would i put mine online im using this release here.
http://forum.ragezone.com/f452/vbox-...-6-1-a-650130/

my modem/router its a all in one's range is a little different
my routers ip is 192.168.x.x my x.x is different to the server's the servers is 192.168.0.1

The current setup which i followed in the above thread works since i have it under Host only adapter.

i can ping the vbox fine and i can ping myself fine from the vbox itself

if i go bridged i cant do anything

-Current Setup-
http://i402.photobucket.com/albums/p...untitled-5.jpg

both xxx.xxx.0.1 not possible - try host-only to xxx.xxx.0.2 or go bridge modus [ i use only bridge modus - its better and easier ]

Quote:

---

Originally Posted by fgru

both xxx.xxx.0.1 not possible - try host-only to xxx.xxx.0.2 or go bridge modus [ i use only bridge modus - its better and easier ]

---

Which ip would i change?
because both are technically wrong
my network is like 192.168.1.1 so on and so forth not the current set which is 192.168.0.1 or 192.168.0.10 if that makes sense so which ips would i change? both or which one could you please specify which one i will need to change and where else i would need to change the ip

Thanks.

Change to bridged mode and make sure the vbox bridged mode driver is enable on your network card.

http://i790.photobucket.com/albums/y...vboxdriver.png

edit your /etc/network/interfaces

Code:

---

#The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.X 
netmask 255.255.255.0 #Subnet mask
network 192.168.1.0 #Network
broardcast 192.168.1.255 #Broardcast
gateway 192.168.1.1 #This is your gateway which is your router.
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.1.1 #dns if you have it.

---

resolv.conf

Code:

---

nameservers 192.168.1.1

---

Then change the ips in the following files except 0.0.0.0

Code:

---

/PWServer/gacd/gamesys.conf
/PWServer/gamed/gmserver.conf
/PWServer/gamed/gs.conf
/PWServer/gamed/gsrollback.conf
/PWServer/gamedbd/cashstat.conf
/PWServer/gamedbd/gamesys.conf
/PWServer/gdeliveryd/gamesys.conf
/PWServer/gfactiond/gamesys.conf
/PWServer/glinkd/gamesys.conf
/PWServer/logservice/logservice.conf
/PWServer/uniquenamed/gamesys.conf
/etc/authd.conf
/etc/gmopgen.xml
/etc/GMserver.conf
/etc/hosts
/etc/iweb.conf
/root/apache-tomcat-5.5.28/webapps/pwAdmin/.pwconf.conf

---

You may need to clear the cache of tomcat by deleting the contents of the work folder in tomcat.

Then type

Code:

---

apt-get update

---

Then

Code:

---

apt-get install noip2

---

Follow the guide on the first post

Then forward your ports on your router

29000 = Perfert world server (You Must forward this for obvious reasons)
80 = apache webserver this contains the http://192.168.0.10/pw
8080 = apache tomcat. This is pwAdmin
It is up to you whether you forward ports 80 and 8080. Keep in mind that players need a way to register.

DONE!
i have a public server (just for tests)

so i dont knowif someone already ask this..but
i ll ask..
with noip installed
i can make a /CPW/? to put files from my server aut in the clients
cuz i wanna kno how it works in public server

- and register/rank pages can i put the ip for noip or ip for vbox?

can someone tellme those things..
cuz this is almost a PUBLIC server so if iget a host server i wll know
a little how it wll work..

well thanks in advanced
sorry MY BAD ENGLISH =]

When i switch to bridged mode i cannot do anything.
i cant access the server via wincp on 192.168.0.10 nor any other ip address
i have the adapter enabled on my network card like you said.

bridged mode are host ip range like second or third pc on your network - you musst change all ips with one of you host network ...

So the 192.168.0.10 would be changed to the next available ip by my router like for instance
192.168.1.3

so it would look like so.
-/etc/network/interfaces-

Code:

---

#The primary network interface
auto eth0
iface eth0 inet static
address 192.168.1.3
netmask 255.255.255.0 #Subnet mask
network 192.168.1.1 #Network
broardcast 192.168.1.255 #Broardcast
gateway 192.168.1.1 #This is your gateway which is your router.
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.1.1 #dns if you have it.

---

-resolv.conf-

Code:

---

nameservers 192.168.1.1    <-- no idea if i need to change

---

-then-
Change all the ips in these files from 192.168.0.10 to 192.168.0.3 ?

Code:

---

/PWServer/gacd/gamesys.conf
/PWServer/gamed/gmserver.conf
/PWServer/gamed/gs.conf
/PWServer/gamed/gsrollback.conf
/PWServer/gamedbd/cashstat.conf
/PWServer/gamedbd/gamesys.conf
/PWServer/gdeliveryd/gamesys.conf
/PWServer/gfactiond/gamesys.conf
/PWServer/glinkd/gamesys.conf
/PWServer/logservice/logservice.conf
/PWServer/uniquenamed/gamesys.conf
/etc/authd.conf
/etc/gmopgen.xml
/etc/GMserver.conf
/etc/hosts
/etc/iweb.conf
/root/apache-tomcat-5.5.28/webapps/pwAdmin/.pwconf.conf

---

if someone could pm me there whole config so i may see and edit where i should then it would be great or post here.

Quote:

---

network 192.168.1.1 #Network

---

I believe this should be 192.168.1.0

Quote:

---

Change all the ips in these files from 192.168.0.10 to 192.168.0.3 ?

---

Is this a typo. Shouldnt it be 192.168.1.3?

But yeah that should work from my understanding. Or at least its what I did.

yea it was a typo sorry about that.
ok i will give this a shot.

-Edit-
Seems i have got it working now the apt-get update commands working so its now using the my network yay ^^ thanks

-Double Post- Sorry
Ok everything seems to be working great but.
my ips etc are sending me to my router page any ideas?

Did you forward your ports?

It will be something to do with your router.

I have forwarded every port that is needed.
all my ips lead me back to my router configuration page

And my no-ip sends me there also which is annoying as hell since this is the last piece of the puzzle lol.

-Edit-
Figured it out fixed :P
Thought i cant get pwadmin to load now -.- lol.

-Edit-
Got pwAdmin running thought i cannot access 2 of the pages.
Server Control <- comes up with nothing just the menu bar
Characters <- does the same as above.

Characters site goes on after server start ...

Thats the point i cannot start the server because i cannot view the Server Control tab i click it and nothing comes up i just see the menu bar above it.

-Edit-
Does anyone has any ideas why i cannot view Server Control page in pwAdmin? i have reinstalled pwadmin 3 times now for no change.


-Edit-
Ok now im somewhat baffled lol.
i have 2 pwAdmins 1 is allowing me to open my server and not letting me edit characters or add [GM] etc
The second one allows me to edit characters etc add gm delete charcacters etc but does not let me view server control and character pages.
Also pwAdmin <-1 lets me login with 1 user.
and pwAdmin <1 lets me use a differant 1
and both have the exact same config.
1 use's my user obviously root
and the other use's my password.

Well this is mi first post i read post and post and really need help T_T i try to put a server an play whit a friends but i cant put online T_T, i install de no-ip like the guide, i have conexcion in the vbox whit te red, can ping whit google.com, i changed the ip in the directories of server.
I use router and dont know what i doo wrong this pic maybe help o tellme what post i can read, i really desperate, sorry mi bad inglish.

When i trie to conect i have this error

Welcome to RaGEZONE

Please edit your posts if you post a few minutes later to avoid double posting.

Please read here
http://forum.ragezone.com/f452/help-...9/#post5769313
http://forum.ragezone.com/f452/etc-n...e-help-685847/

I don't know how you are able to connect to the server because to me the interfaces looks wrong.

Your resolv.conf looks correct and as does the vbox settings.

I take it you managed to install no-ip?

Its also pointless testing both connections on the same PC. The PC connecting to your no-ip address must be outside your internal network.

As for your most recent image. It looks like you have logged into the server and can create a character but can't access the world. In my experience this is because the location you are trying to enter is not available. Make sure that all the required maps are running then login and/or change your characters location via pwAdmin.

Quote:

---

Originally Posted by Drakaer

Welcome to RaGEZONE

Please edit your posts if you post a few minutes later to avoid double posting.

Please read here
http://forum.ragezone.com/f452/help-...9/#post5769313
http://forum.ragezone.com/f452/etc-n...e-help-685847/

I don't know how you are able to connect to the server because to me the interfaces looks wrong.

Your resolv.conf looks correct and as does the vbox settings.

I take it you managed to install no-ip?

Its also pointless testing both connections on the same PC. The PC connecting to your no-ip address must be outside your internal network.

As for your most recent image. It looks like you have logged into the server and can create a character but can't access the world. In my experience this is because the location you are trying to enter is not available. Make sure that all the required maps are running then login and/or change your characters location via pwAdmin.

---

well i see the guides but i have the same error i cant put mi server public. In the interfaces 1 guide says the ip cannot be 192.168.0.10 need be in the same range an my ip is 192.168.1.x i changed for 198.168.1.4 but when do the same to VBOX i cant enter to the pwAdmin, if i let the VBOX in 192.168.0.1 and the interfaces 198.168.1.4 can enter to pwAdmin & game.
And the 2 guide says other things =S and i lost because say the ip be the same in the VBOX an ADDRESS.
this is mi ip.
router ip: 189.221.196.132
ip lan: 192.168.1.1
red lad: 192.168.1.2
wlan: 192.168.1.3
and put this ip to the vbox: 192.168.1.5
and change the address in the interfaces to: 192.168.1.4
if change the VBOX to 192.168.1.4 i lost the conection
only in this mode can access to pwAdmi or i have to let the vbox whit the initial 192.168.0.1
The dns i put the router ip and put this in no-ip.
If can sayme the rigth configuration i preciated.
sorry mi bad ingl.

i cant put the server public i think is the port in the red whit the pages to check ports the 80, 8080 and 29000 looks closed i use portforwaring tools but is closed the ports T_T