hi ppl i a bit new but onlie >>VMWARE<< dont work even no fails
hi ppl im a bit new here
i folowd chumpy with is great helping tuts he made
i made DB working in SQL2005 cos i got WIN 7
but when i try vmware big problems ectualy i know
its not much to do in there
THIS is what i did and dont get an WAN ip foundet in VMWARE :S
this is info of my internet
my pc's ip = 192.168.0.100
defauld gateway 192.168.0.1
netsub mask 255.255.255.0
this is wath i entert in vmware
default gateway 192.168.0.1
ip adres not inuse like i did
192.168.0.110 = not in use on router
netsubmask 255.255.255.0
i opend the ports on router at 192.168.0.110 38101-38195
coz i used this ip in VMWARE and that need this ports to alow other players
but i got 1 little problem if i do the /cabal/cabal_config.sh
it dont look for my wan ip :S can some one help me to get it work again i had it working befour but i duno what i did wrong :S
Re: hi ppl i a bit new but onlie >>VMWARE<< dont work even no fails
Quote:
Originally Posted by
wesley2811
hi ppl im a bit new here
i folowd chumpy with is great helping tuts he made
i made DB working in SQL2005 cos i got WIN 7
but when i try vmware big problems ectualy i know
its not much to do in there
THIS is what i did and dont get an WAN ip foundet in VMWARE :S
this is info of my internet
my pc's ip = 192.168.0.100
defauld gateway 192.168.0.1
netsub mask 255.255.255.0
this is wath i entert in vmware
default gateway 192.168.0.1
ip adres not inuse like i did
192.168.0.110 = not in use on router
netsubmask 255.255.255.0
i opend the ports on router at 192.168.0.110 38101-38195
coz i used this ip in VMWARE and that need this ports to alow other players
but i got 1 little problem if i do the /cabal/cabal_config.sh
it dont look for my wan ip :S can some one help me to get it work again i had it working befour but i duno what i did wrong :S
Try to re-install all..
not Config.sh thing
try to chmod again...
Re: hi ppl i a bit new but onlie >>VMWARE<< dont work even no fails
Quote:
Originally Posted by
TanGzkie
Try to re-install all..
not Config.sh thing
try to chmod again...
its a already instald cabal :S
and it sees my pc conecting it on 192.168.0.100 if i use winscp 192.168.0.110
that works allso
Re: hi ppl i a bit new but onlie >>VMWARE<< dont work even no fails
Quote:
Originally Posted by
TanGzkie
Try to re-install all..
not Config.sh thing
try to chmod again...
i did what you told me
and stil got same problem :S
this what i tipe in vmware
ip 192.168.0.110 not in use on my router ports are forwardet for this ip
than my pc's subnetmask 255.255.255.0
than my gateway ip 192.168.0.1
this is the info i get if i reboot and tipe in ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c: etc
inet addr:192.168.0.110 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr:fe80:: etc Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueueen:1000
RX bytes:60 (60.0 b) TX bytes:760 (760.0 b)
interupt:177 Base address: 0x1080
lo Link encap:Local loopback
inet addr:127.0.0.1 mask:255.0.0.0
inet6 addr::1/128 scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueueen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
