Item Stacking & Azria Drops?

Hey.. I have 2 problems, and I hope some of you are able to help me! :D

The first one is, that I have problem with the stacking.. I want it to be up to 999, or up to 9999, I have heard that you should just edit it in propItem.txt, but the list is so long, and it would take ages to edit all of them, so I'm wondering if there is a faster way, or if someone already made one, where some of the items is stack able up to 999, or 9999.

My other problem is, my drop rate is 500x (I have set both the droprate and the piecedroprate to 500x) but when I aoe in Azria, I'm getting a lot of moons and suns, but I don't find any greens? :O
Even if I raise the drop rate to 5000 (both of them) I don't get a single piece from an aoe?

I would be happy if someone could help me out! :w00t::w00t:

increade fPiece aswell

1.) Your rate is too high. Lower your rate to get better results.

2.) No, there is no "ready-made" file for you. Just stop being lazy and edit the items. You can copy/paste if you're using Excel, so it makes it much faster when doing it that way.

Thanks, but if 500x is to high, what is the maximum drop rate then? :)

EDIT: ROFL, I have edited all 99 or 999 in propItem.txt to 9999, but now my WorldServer won't open! -.- what did I do wrong?

Check error logs.

my drop rate is at 50x and it seems to be a good amount.

Post your error log.

(Maybe you saved the files in wrong format.)

post log , for we check

Sorry for the time I took answering, I was in school! d: But here my error log is, after i deleted it, and opened WorldServer, and after it crashed again:


2010/12/10 12:38:38 propItem.txt ID:0 last_read(ID:16716 name:Rabbit Hat(M))

2010/12/10 12:38:38 FileName character.inc(4396) : SI_RIN_SUP_GEBURAHTIPHRETH Not Found. : SI_RIN_SUP_GEBURAHTIPHRETH, 10, 1, 129, 86400000 );



SetImage

(

IDS

2010/12/10 12:38:38 FileName character.inc(6541) : SI_RIN_SUP_GEBURAHTIPHRETH Not Found. : SI_RIN_SUP_GEBURAHTIPHRETH, 10, 1, 129, 86400000 );

SetImage

(

IDS_CH

2010/12/10 12:38:38 FileName character.inc(7071) : SI_RIN_SUP_GEBURAHTIPHRETH Not Found. : SI_RIN_SUP_GEBURAHTIPHRETH, 10, 1, 129, 86400000 );

SetImage

(

IDS_CH

2010/12/10 12:38:38 OP: 859689, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0


2010/12/10 12:38:40 rCnt=1

7.WorldServer.exe caused an EXCEPTION_ACCESS_VIOLATION in module 7.WorldServer.exe at 0023:004A1883

- Registers

EAX=00000000 EBX=1F058220 ECX=0006DCE4 EDX=05520020 ESI=1F058BEC
EDI=00000000 EBP=04F6E888 ESP=058DB9E4 EIP=004A1883 FLG=00010287
CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B

0023:004A1883 (0x00006E6F 0x00000000 0x00000000 0x00000000) 7.WorldServer.exe


Any ideas of why it's crashing, I tryed to edit just a few things in it to 9999, but it did still crash (this is for the propItem.txt where all 99/999 is set to 9999)

Btw, I know it works with the original propItem.txt, I have just tryed it..

I hope you guys are able to help me! :D

I see one problem with propItem.txt and it's in the error log. There also seems to be an error with your character.inc file. I'd take of that before it becomes an issue. The error log shows you where in a file you need to look. IN the case of propItem.txt, cross reference with the propItem.txt.txt for item name to ID and so on so you can find the item that is giving you issues. It might be that you made a CS item stack when it's not supposed it.

Anyway, check the error log and look at the files it shows and if you need to know where exactly (line/row) you need to look in the .inc files, try using Notepad with Status Bar enabled or Notepad++ or any other programming text editor.

I have just checked the Rabbit Hat (M) and it's not stackable, I have just copied that row, from the original propItem.txt, but the issue's still there, and the error log is the same? ._.

EDIT: All right, I edited my NPC to NOT buff GT, and now all the GT stuff is gone, and my error log looks like this:

2010/12/10 16:21:30 propItem.txt ID:0 last_read(ID:16716 name:Rabbit Hat(M))

2010/12/10 16:21:30 OP: 4787214, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0


2010/12/10 16:21:32 rCnt=1

7.WorldServer.exe caused an EXCEPTION_ACCESS_VIOLATION in module 7.WorldServer.exe at 0023:004A1883

- Registers

EAX=00000000 EBX=1F111C28 ECX=0006DCE4 EDX=05540020 ESI=1F1125F4
EDI=00000000 EBP=0503E888 ESP=057FB9E4 EIP=004A1883 FLG=00010287
CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B

0023:004A1883 (0x00006E6F 0x00000000 0x00000000 0x00000000) 7.WorldServer.exe

Then there's still something wrong with the Rabbit Hat (M). My guess is that either there's a conflicting ID name (which wouldn't surprise me since there are so many and it's easy to never know that for sure, or your Rabbit Hat (M)'s files are corrupted (dds/o3d). Or perhaps, and you might not even know it, the info on the file is wrong, even if it's just one small value you may have overlooked. o;

But, if I copy the row from the original file, it's still not working, and it does if I replace the files?

It should. I had that kinda of issue before with maps and models and I replaced them with good copies and it worked out.

you guys are reading the error wrong. the error says 'last_read', which means that was the last successful item that it read from the file. you have to look at the row right after that, to find the problem. idk what it is (since I'm too lazy to look), but that's where you messed up on something.

I edited that row, but all it does now, is to say this:

2010/12/11 18:36:16 propItem.txt ID:0 last_read(ID:11 name:16717)

2010/12/11 18:36:16 OP: 5213022, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0


2010/12/11 18:36:18 rCnt=1

7.WorldServer.exe caused an EXCEPTION_ACCESS_VIOLATION in module 7.WorldServer.exe at 0023:004A1883

- Registers

EAX=00000000 EBX=1F00F8B8 ECX=0006DCE4 EDX=032C0020 ESI=1F010284
EDI=00000000 EBP=050AE888 ESP=0579B9E4 EIP=004A1883 FLG=00010287
CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B

0023:004A1883 (0x00006E6F 0x00000000 0x00000000 0x00000000) 7.WorldServer.exe

which means it's just the next row that's wrong now? ._.

EDIT: If I copy the row under the Rabbit Suit (M) (which is ID 11: 16716) then it still says that ID 11 16717 is wrong, even though I just eddited the row under 16716, so what did i do wrong? (I copied the row for Rabbit Gauntlets (M) .. )

yeah, that means the row under that one is wrong. idk what you did, but you messed up a lot of rows lol

but if I edit that row it still says the same error... ? I edited the row under 16717, but it still says the EXACT same error..
Can someone PLEASE help me what to do? :D

Ehm... isn't there a single friendly person who can help me? :*: