Cant see servers

Hi. İ'am Create Gunz server but, Gunz server not list. help me

system.mrs compile GunzDB Locator matchserver matchagent not error.
help me please and screenshot;

http://img18.imageshack.us/img18/9976/adszaw.jpg

Post the following...

Spoiler:

MatchAgent - Config.xml
MatchServer - Server.xml
Locator - locator.xml
System.mrs - system.xml

Did you portforward, and setup the DB?

Hi. I'am not port add Locator All Set.

What PortForward ?

Quote:

---

Originally Posted by burak695

Hi. I'am not port add Locator All Set.

What PortForward ?

---

Open these ports on your router:
6000 tcp
5100 udp
7000 to 7777 tcp and udp
8900 tcp
80 tcp

@OFFTOPIC
Portları açtınmı demek istiyor

Quote:

---

Originally Posted by burak695

Hi. I'am not port add Locator All Set.

What PortForward ?

---

PortForwarding : Port forwarding or port mapping is the forwarding of a TCP/IP packet in a network address translator gateway to a predetermined network port on a host within a masqueraded, typically private, network based on the port number on which it was received from the originating host. ...

Here, do this and your server should show up...

Spoiler:

Port Forwarding
1) Click Start> Run> and type "cmd"
2) Once you are prompted with a black window, type "ipconfig"
3) Find "Default Gateway" and remember it
4) Find "IP Adress" and remember that also
5) Open your internet browser and type your Default Gateway into the url box.
6) Enter the username (default admin) and password (default admin) when prompted. If you don't know your username/password go here: Default Router Passwords - The internets most comprehensive router password database

Ports:
6100-6100 - TCP
7000-7000 - TCP
6000-6000 - Both
7777-7778 - Both
5100-5100 - Both
8900-8900 - Both
80-80 - TCP

7) Find your Port Fowarding page and enter this information:
8) Enter the last 3 numbers of your IP Address (from ipconfig) and enter those numbers into the IP Address boxes.
9) Check to see if your ports are open using this program: http://www.portforward.com/store/PFPortChecker.exe

Credit to: eagledude4, for the tutorial.

Noah, first of all, there is no such thing as "Config.xml" or "server.xml" or "locator.xml".
Secondly, Agent config is no where related to the server connection issues.
Thirdly, why ask him to port forward without even looking at his configuration files?

@OP: Post your server.ini first. Do what others say after we have a look at your server.ini.

PortForward site's; We were not able ping your router but I All port Create :S

Quote:

---

Originally Posted by burak695

PortForward site's; We were not able ping your router but I All port Create :S

---

I told you, don't try port forwarding yet. First post your server.ini and MatchServer logs, and make sure the contents of ServerStatus.dbo in your database are correct.

Phoenix Your Look ScreenShot;

http://img21.imageshack.us/img21/5738/2356u.jpg

http://img259.imageshack.us/img259/6782/790s.jpg

Uploaded with ImageShack.us


http://img21.imageshack.us/img21/5738/2356u.jpg

Uploaded with ImageShack.us

http://img200.imageshack.us/img200/3059/helpcz.jpg

Uploaded with ImageShack.us


http://img820.imageshack.us/img820/8274/5678k.jpg

Uploaded with ImageShack.us

http://img820.imageshack.us/img820/8274/5678k.jpg

Uploaded with ImageShack.us

Thank You Phoenix.

FREELOGINIP in the server.ini should be left blank like this:

Code:

---

FREELOGINIP=""

---

Do that and restart the server. Next time, don't post so many images. Post configuration files between CODE tags.

Lol, well i asked him to show me his files, but he DIDN'T as you can see... And also, i made a mistake with the match server system.ini, but i Just noticed those mistakes.... Anyways, I'm gonna stop posting on this before i get a warning again... x.x