Printable View
http://forum.ragezone.com/f613/release-x-rivals-755709/
Download the Files.
Download the newest AceOnline client.
Copy the AceOnline.atm from the Server files to the client ( Res-tex/Res-exe )
Copy the .obj and .dat from the client folder to the server.
in the next step change the global.cfg! and insert the odbcs and you got it!
Have fun.
First of all you should imho point that GigaByte quest's(its more like workaround), arent proper ones for ep3.2 also PanKJ DB backup does miss some stuff still and at the end PanKJ config's are working , but they are wrong at some points . Obviously server will run but it still needs ALOOOOT of work.
P.S
Well besides as far as i do recognize thats tutorial section :P And i dont see any tutorial what youve made... gathering in one place everything what is actually at ONE thread isnt tutorial for me at least : )... oh well at least you could point how to set it up for those brainless leechers :P (no offence ofc... inb4 someone will take that too serious and jump of mount everest)
client flysis???
Noooo! Ep3 server needs an ep3 client. Im not 100% sure i got what you mean but nvm.
Airrivals???? Aceonline????? Panjk yo hablo español, i speak spanish ¿NVM?
Nope, i speak greek and english only. As ive said in the "Question about ep3 config" thread the easiest client is the Battlegears client. Just google it.
thank you very much. acepack need to pass the fileQuote:
Originally Posted by PanKJ
---------- Post added at 04:22 PM ---------- Previous post was at 04:18 PM ----------
sorry, xD, is panjk the passQuote:
Originally Posted by cam46
this vercion ep3, no need ODBC.reg???????????????
You have to create the dsn settings manually. Follow this guide, it explains most thins in detail, just use ep3 stuff instead of ep2.
make a hook inside under option, check out the video just to ...
---------- Post added at 01:16 AM ---------- Previous post was at 01:15 AM ----------
edit \\ download SQL Server 2008
Good tutorial.I'll try
yes .no needQuote:
Originally Posted by cam46
---------- Post added at 05:13 PM ---------- Previous post was at 05:08 PM ----------
new urlQuote:
Originally Posted by mKeey
BattleGears OBT Setup (2.0.2.5)
http://dl.d-rivals.com/clients/Battl...0(2.0.2.5).exe
i found this client in't not good for me。
and how to use patch 。which one aceonline.atm , Hackshield(BattleGears, hackshield folder is diffrence to ep3 server. so how to cover or use? )
cline die re up
new link for Battlegears Setup 2.0.2.5
http://dl.d-rivals.com/clients/old/B...0(2.0.2.5).exe
Nice release brother...
i was looking this repack AIO.
now just the client because i got error on that link.
i was search on google, i got 2 for same but its error too.
i hope some1 here can re-upload on megaupload or some where.
SRRY THE WEB SITE ITS NOT WORK FOR THE CLIENT !!!
ples give me the client site ples
stfu man, the fucking server is currently down!.. dont QQ all times!
5 days I've been looking through the forum and the only thing I see in response is your stupid answers. People like you should be thrown to feed the pigs at birth. Nice try with this video tutorial you deleted those days.Quote:
Originally Posted by mKeey
The demand for the BattleGears client is so cute ^_^
You'll have more luck with this one:
http://dr-files.net/clients/old/Batt...0(2.0.0.0).exe
thanks but could someone make a FULL tut: How to install the EP3 server?
There are plenty of posts for you to figure it out yourself.Quote:
Originally Posted by ARTYOMT
in the link missed the Bin's how the hell i can run a server ep 3.2???
Please, for the love of god, use the search function or apply common sense!
If the above fails, get the hell out.
And make your own damn client people.
Mate, do You honestly think that they can ?Quote:
Originally Posted by gigabyte
i doubt that...
Especially if you look at previous threads of some ppl here, that they can't fix simple things like HH or w/e...
PS
Alpha sounds better then Omega :P
I dont understand what the problem should be in getting an own client working. Can someone tell me?
It's called using common sense and applying some basic logic.
Around 95% of the people here lack either one or both of those things.
I call it 98% OoQuote:
Originally Posted by DragonLord
nevermind...
Hello guys, sorry to bother you with that but,i read all of the tutorial,all of the threads in pankj section but i find nothing really explicit about installation,that speaks a lot about dev, i like it and eat it for after. But a full tutorial for EP3 server setup is really missing. I know you dont have time or that bored you. Anyway
A lot of question is in supsend like "need a mix ep2+ep3 database?" or "why preserv.exe and preserv_ep3.exe" ? its only a begining to be honest,im really curious and search a lot,but i dont really all understand,anyone to get a full tutorial of ep3 server? pls pls pls
What you ask (a tutorial) is something noone would bother doing, cause once you understand how to install, you find it too simple.
Briefly:
1. Download files. You need server files and db, they are already uploaded.
2. Install and setup mssql.
3. Make sure you have the right bins/configs/db, same episode.
4. Setup stuff like db ip, port, user, pass correctly.
5. Run the server (pre, im, log, field, npc) or the server starter by jared if you downed his release.
6. Post your errors until it runs.
7. Maybe post a guide for others?
Quote:
Originally Posted by PanKJ
6. Most of errors what he can get , is already explained like zomg times :3
Ok let's start so (respond for all plz and if at end all work i will do a large tuto)
1. Download files. You need server files and db, they are already uploaded.=> OK
2. Install and setup mssql.=> OK
3. Make sure you have the right bins/configs/db, same episode.=> ding dong ? ep 3 database and bin/config links on first page not good?
4. Setup stuff like db ip, port, user, pass correctly.=> hmm db ip port i suppose in global.cfg anyway i got it
5. Run the server (pre, im, log, field, npc) or the server starter by jared if you downed his release.=> ding dong ? i know it but there is iocp error cause in my global.cfg when i use db_1 pre ok field not ok,when i use db_acc pre not ok directly
6. Post your errors until it runs.
7. Maybe post a guide for others?
3. From this thread no, but there is another one. But i doubt that you can see it , its red and is barerly visible.Quote:
Originally Posted by desp08500
4.DB,ip and port <- That "sentence" isn't obvious? (even if it's not then you should go back to reading tutorials)
4. Ding fucking dong USE SEARCH and you will find your answers about error logs.
What a constructive answer wow....
---------- Post added at 04:02 PM ---------- Previous post was at 03:20 PM ----------
Ok let's gorget that,
3. From this thread no, but there is another one. But i doubt that you can see it , its red and is barerly visible.
4.DB,ip and port <- That "sentence" isn't obvious? (even if it's not then you should go back to reading tutorials)
4. Ding fucking dong USE SEARCH and you will find your answers about error logs.
3=>i see it and down it long time ago,i just search the good question to get the good answer
About database, on this magnifique red post database are same than on first page.
4=> That was just try to get good question to find answer (i was ok with it anyway on my post)
4=> yes i find a lot of error log in searching,but not with my exact problem. Since begining i think i dont get the good bin (pre im log etc...)cause with the config.rar who got * i got automatically LoadConfigurationError and iocp.
Maybe i do a bad activity,to be sure, it's pre im log field npc sercer_ep3 or pre im log field npc server only to run? (and by serverstarter you mean watchprocess?)
Did you read the "Must read for ep3 server thread"? I suppose its called ike that because you MUUUUST read it. Even if we spend hours explaining you wont understand if you dont read that thread. What you need is there: bins, configs and dbs (FULL). If you suspect bins dont work use those from jared, thats what i used at least. And from my experience most errors are cause by wrong config and the fact that most guys find the must read for ep3 thread too big. However i have no intention rewriting what ive written in there so simply go read the thread. As i said, the files you need are there, if you combine them with jareds release. And even if youre 100% sure theres no fix for your error at least post your logs and what error was thrown in the message box. In any case tho, im 99.999% sure the error is solved and posted so search as l34V3 said too, and in fact theyre solved like 100 times each. Forgot to say: not only use the search function but also use your brain and your common sense (most people here dont have it but i hope youre smart enough to know how to find your info).
PS: based on your problems description id have to try to guess what it is for a month. Try to explain better when you need help.
Hum im trying another way in using ep2 server bin and config,in adding map dat and sma FULL on map folder,im almost done but always one error stay, field serv iocp init i post my log and my config. Can't say if ncp server work well while this not fix
I read something like that about sma file error so i download the full sma pack, i resolved the last problem like that, but on this one,i'm really not sure of what provoked this,some error target warp and a final error iocp.
Like you can see, i try to use my brain,i try to find solution,maybe im so closed to it...
DB error. Is your mystery item drop info table ok? You obviously have to look for the last error, which is the error before IOCPInit Error. I mean, that the iocpinit is caused by the last error, so always look for the error above it.Code:05-13 01:08:56|ERROR: CAtumDBHelper::LoadMysteryItemDropInfo() Failed!!!
05-13 01:08:56|[Error] FieldServer IOCPInit Error
05-13 01:08:56|ERROR: CAtumDBHelper::LoadMysteryItemDropInfo() Failed!!!
OK i see, i look on table and i see something strange about database bak files i got,2 database 14mb arround and your database 150mb+
the 150mb is good?
Then in looking on this table about itemDropInfo,i was thinkink that localization was doing the job?
Anyway in it i see servgroupid int null with id ((0)),if i always try to use my brain, servergroupid should be 10061 no?
Does your MysteryItemDrop table in atum2_db_account have any entries? If its empty its obvious that the server cant run. And idk what db you use nor do i remember the sizes of the dbs.
with the X-Rivals(thread) Pack what Client i need to use?
Dont post irrelevant post in wrong threads.
PanKJ i used ur DB but when i uploa the sql its wants 40 GB space for DB :S Is it normaly ? And can u give other DB ?
Yes it needs much space because i uploaded it before shrinking it and no, i wont give my db since its way too modified to kust give it away to leechers.
another mirror download link ?
guys, need your help
i try to set up ep3 server with X-Rivals server files. Everything goes normal, but I can't start Log server - seems like it cant connect to db, then craches Pre server with same error. I don't have any idea what can be wrong
EDIT: got this errors
http://s1.ipicture.ru/uploads/20110711/XM17a71M.png
check the ODBC's and ur global.cfg
hecked few times< i don't see any mistakes
btw, now, without any troubles, start ep2 server and I'm using same manual...
seems like problems with Log Server's configs...
here is my global.cfg
http://www.2shared.com/file/tTXixaUf/global.html
can you look whats wrong with it?
EDIT^Next day
I found a mistake, I use Windows Authentication to connect to db - as you know, this type don't need pass and login, but in Global.cfg I set em (atum, callweb).
So now I have another trouble
http://s2.ipicture.ru/uploads/20110712/45I5b9NC.png
wtf is this?
YOU MUST SET LOGDBSERVER! <--- Isn't that obvious ? ...Quote:
Originally Posted by SlyghtlyMad
okay, server works, Launcher opens but after typing login-pass and pressing Start launcher just shutdown and game don't start
Try to start launcher as an adminQuote:
Originally Posted by SlyghtlyMad
still don't startQuote:
Originally Posted by killburne
Ahahaha same problem I had, set ip defaults to 127.0.0.1 not in the local ip dr tho... I'll put my global ip later. Also I recomend using hamachi
Posted via Mobile Device
I found what's wrong. Stupid WatchProcess starts Ep2 server insteed of Ep3 and configs was for Ep2 (Jared's Server)
your global.cfg is wrong yust correct your ips in and it will runQuote:
Originally Posted by SlyghtlyMad
$LOCAL_IP_ADDR = hamachii ip or whatever
$LOCAL_PUBLIC_IP_ADDR = $LOCAL_IP_ADDR
$DB_SERVER_IP 127.0.0.1
$LOGDB_SERVER_IP 127.0.0.1
$BILLING_SERVER_IP 127.0.0.1
$EXTAUTH_DB_SERVER_IP 127.0.0.1
Quote:
Originally Posted by zeyden
This is what i meant :P
To re-upload your client?
Can please any admin ban asdl? He can't use the search button!
mmmmmmm, im now use x-rivals files, XORed???????XORed<<<<wtf is this???xD
XORed its a user of the data bases, how to created or view password?
sorry 4 my very bad english
excuse me,why my ep3 server set global.cfg and odbc,but still can't running?
prompt configxxxxxxxxx by after running im.