Gmtool_cmd

----- ****.ei.tmp after GMTOOL_CMD18
2011-02-13 21:40:41 1 Yunko 0 [N_ITEMDROP] GMTOOL_CMD18 : Rate(4/1000)
------ GameServer Window after GMTOOL_CMD50
2011-02-13 21:56:11 EXECUTE_MAPEVENT_RELOAD

It seems Authserver takes whats inside Pangya_Server_Command and turns it into GMTOOL_CMD commands.

Simply input values in the table named above and inside AuthServer type cmdon, then check GameServer logs.



To be able to see mapevent_reload in gameserver window you need to input LOG_ON in the gameserver window first.


To do whats in the screenshot, simply input:
command: 1
arg1: 1
arg2: 1
arg3: 1
arg4: 1
arg5: SOME-TEXT
target: GUID-OF-GAMESERVER
RegDate: SOME-DATE
ReserveDate: NULL


Found some stuff (If you use OllyDbg you can search for "EXECUTE_" and see what command it is):

GameServer:

Quote:

---

0 = Notice (with the right parameters)
1 = EXECUTE_SERVER_SHUTDOWN
2 = EXECUTE_SERVER_CANCEL_SHUTDOWN
3 = EXECUTE_SERVER_SERVICE_CONTROL(1)
9 = EXECUTE_RELOAD_IFF
10 = EXECUTE_KICK_PLAYER(1)
11 = EXECUTE_UPDATE_PATCH_VERSION(test)
12 = EXECUTE_CHANGE_QUEST_FLAG(1,1)
13 = EXECUTE_CHANGE_QUESTDROP_PROB(1,1)
14 = EXECUTE_CHANGE_QUESTDROP_FLAG(1,1)
15 = EXECUTE_PANG_EVENT(1)
16 = EXECUTE_EXP_EVENT(1)
17 = EXECUTE_CHANGE_EVENT_FLAG(1)
18 = rate
19 = EXECUTE_ANGEL_EVENT(1)
20 = EXECUTE_RAIN_EVENT(0.1)
21 = EXECUTE_BONGDARISHOP_RATIO(Rate:1, Cookie:1) + EXECUTE_BONGDARISHOP_RATIO(1,1)
22 = EXECUTE_MAP_PANG_EVENT(1,1)
23 = EXECUTE_CHANGE_SERVER_ICON(1)
24 = EXECUTE_JACKPOT(1)
25 = EXECUTE_SCRATCH_RATIO(1)
28 = EXECUTE_GIFT_DROP
29 = EXECUTE_XMAS_SOCK_DROP(1)
30 = EXECUTE_NEWYEAR_MONEY(drop:1, rare:1)
33 = EXECUTE_EVENT_GIFTBOX(drop:1, rare:1)
36 = EXECUTE_EVENT_SET_STATE(event on)
50 = map event rate (doesnt work thru this?)
51 = EXECUTE_SET_GAUGETIME
52 = EXECUTE_SET_MAPGAUGE(event %s)
53 = EXECUTE_GHOST_SERVICE(OK, SERVICE ENABLED)
100 = Thai ItemDrop Multiply %s
101 = Thai Exp Multiply %s
102 = Thai ExpRate Changed from %d to %d
103 = Thai NetCafe Pang Double %s
104 = SET JACKPOT MODE user count : 1
105 = CANCLE JACKPOT MODE
106 = Golden time auto select event STOP
107 = Golden time auto select event RESUME

---

LoginServer

Quote:

---

1 = EXECUTE_SERVER_SHUTDOWN
2 = EXECUTE_SERVER_CANCEL_SHUTDOWN
6?
7?
26 = Limited Login
27 = alluserlogin

---

nice one chreadie but some explanations would be appreciated and useful.

At GM_CMD should be where the rate of change and pang xp server?

chreadie, once again a good job on discovering this.

This might be a good lead to more gm/admin commands.
As for the question about xp / pang rates.
It is very well possible that this is the way to change them.
Although we are of course not sure.

But while we're talking about xp rates...I'm wondering the value that the gameserver sends to the db (new experience points) is it based on what the client sends?
Because while digging through .iff files i found a simple textfile that contains the required exp for each level.
If you edit that textfile and take 50% off each level's required exp, would it behave as x2 rates for example?

Quote:

---

Originally Posted by X_Sarah_X

chreadie, once again a good job on discovering this.

This might be a good lead to more gm/admin commands.
As for the question about xp / pang rates.
It is very well possible that this is the way to change them.
Although we are of course not sure.

But while we're talking about xp rates...I'm wondering the value that the gameserver sends to the db (new experience points) is it based on what the client sends?
Because while digging through .iff files i found a simple textfile that contains the required exp for each level.
If you edit that textfile and take 50% off each level's required exp, would it behave as x2 rates for example?

---

You could say that, the exp-file is just a way to keep track of the amount of exp for each lvl.

---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------

I hope this update helps :)

Now im going to bed late because i discovered this :D

I've been messing around with it a little.
I managed to get the Angel Event running on my server.
It shows the angel symbol on server select and removes 1 QR-game after each game I play.

I'm looking into Pang event and Exp event at the moment. I can get them executed, with different values (i expect this is the rate) but haven't seen a difference ingame yet.

I just noticed that some of the text has been cut off.

0 is notice
1 is server shutdown
2 is server control

Ill fix it when i get home from work
Posted via Mobile Device

im waiting for u

play around with it?.....

im still at work.

yes i've played around with it but it seemed a freak character when i notice

try changing args, ollydbg gameserver.exe and see what it wants for input

when you back home ?

---------- Post added at 01:22 PM ---------- Previous post was at 01:21 PM ----------

i'm not good in olldydbg

To use command 0 you need to add a message to Pangya_Notice_List and supply Arg1 with the Idx of the notice you want to play.

i love you tsukasa

---------- Post added at 02:06 PM ---------- Previous post was at 01:54 PM ----------

tsukasa , how can i do a replaycount ?

now b2t :) The Regdate column of the Pangya_Server_Command table lets you choose WHEN a command shall be executed. Current_Timestamp or NULL will lead to the next full minute.

Code:

---

EXECUTE_EVENT_MAPGAUGE(event %s)
EXECUTE_SET_GAUGETIME
EXECUTE_EVENT_SET_STATE(event %s)
EXECUTE_MAPEVENT_RELOAD
EXECUTE_EVENT_GIFTBOX(drop:%d, rare:%d)
EXECUTE_NEWYEAR_MONEY(drop:%d, rare:%d)
EXECUTE_XMAS_SOCK_DROP(%d)
EXECUTE_GIFT_DROP
EXECUTE_JACKPOT(%d)
EXECUTE_CHANGE_SERVER_ICON(%d)
EXECUTE_SCRATCH_RATIO(%d)
EXECUTE_MAP_PANG_EVENT(%d,%d)
EXECUTE_BONGDARISHOP_RATIO(%d,%d)
EXECUTE_RAIN_EVENT(%.1f)
EXECUTE_ANGEL_EVENT(%d)
EXECUTE_RELOAD_IFF
EXECUTE_CHANGE_EVENT_FLAG(%d)
EXECUTE_EXP_EVENT(%d)
EXECUTE_PANG_EVENT(%d)
EXECUTE_CHANGE_QUESTDROP_FLAG(%d,%d)
EXECUTE_CHANGE_QUESTDROP_PROB(%d,%d)
EXECUTE_CHANGE_QUEST_FLAG(%d,%d)
EXECUTE_KICK_PLAYER(%d)
EXECUTE_SERVER_SERVICE_CONTROL(%d)
EXECUTE_UPDATE_PATCH_VERSION(%s)
EXECUTE_SERVER_CANCEL_SHUTDOWN
EXECUTE_SERVER_SHUTDOWN(%d)
EXECUTE_BROADCAST_NOTICE(%d)
EXECUTE_GHOST_SERVICE(OK, SERVICE %s)

---

This should be all Available Commands (without command codes)

Quote:

---

Originally Posted by Tsukasa

To use command 0 you need to add a message to Pangya_Notice_List and supply Arg1 with the Idx of the notice you want to play.

---

Arg1 with the Idx of the notice you want to play. ? I do not understand.

Could you explain a little better my friend Tsukasa?

when you insert to pangya_notice_list and put the idx to arg1
idx will automatically generate

Quote:

---

Originally Posted by top1

when you insert to pangya_notice_list and put the idx to arg1
idx will automatically generate

---

right in the command column is "0 " and the other columns: arg2 arg3 arg4 and arg5?

Thank You...

fasa, i think what hes trying to do is to input "arg1" in the idx field in pangya_notice_list.


In pangya_notice_list you insert what u want to show ingame, then u take the generated idx and unput as arg1 in server_command.

Here is what Tsukasa means (i expect because that worked for me)

Insert a notice into Pangya_Notice_List
After inserting remember the value it inserted into the "Idx" column.
This is a unique number to identify the notices.

Then when inserting into Pangya_Command_list fill in this:

Command: 0
Arg1: (Idx number from Pangya_Notice_List)
Arg2: nothing
Arg3: nothing
Arg4: nothing
Arg5: nothing
Target: Gameserver GUID (20201 in my case)
Releasedate: a random date

after this, close the table and check your gameserver window (make sure you've entered "LOG_ON" before in the GS console, else you won't see anything happening)

What this does will look for a notice in Pangya_Notice_List with the Idx provided in Arg1 and it will broadcast this message ingame.

Quote:

---

Originally Posted by X_Sarah_X

Here is what Tsukasa means (i expect because that worked for me)

Insert a notice into Pangya_Notice_List
After inserting remember the value it inserted into the "Idx" column.
This is a unique number to identify the notices.

Then when inserting into Pangya_Command_list fill in this:

Command: 0
Arg1: (Idx number from Pangya_Notice_List)
Arg2: nothing
Arg3: nothing
Arg4: nothing
Arg5: nothing
Target: Gameserver GUID (20201 in my case)
Releasedate: a random date

after this, close the table and check your gameserver window (make sure you've entered "LOG_ON" before in the GS console, else you won't see anything happening)

What this does will look for a notice in Pangya_Notice_List with the Idx provided in Arg1 and it will broadcast this message ingame.

---

Thank you my friend X_Sarah_X, but now I understood...

ty..... nice job (love)

just updated my findings

Damn... This is great. I wish there was a better way to input the commands for the notice message. Premaking it kinda sucks :/

Nice going.

I guess NTreev has some application to do GM stuff, make one :)

---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ----------

Updated with LoginServer commands

very good work I will study and try to adapt in Delphi or C + +. Long work long work ahead.

Its not that hard to do, i would make one but i want to finish my filexplorer first.
Posted via Mobile Device

Quote:

---

Originally Posted by chreadie

Its not that hard to do, i would make one but i want to finish my filexplorer first.
Posted via Mobile Device

---

That's the right decision. One project at a time.
You already helped us a lot by releasing this information.
Even though I couldn't get most things to work the way I expected yet, it did give me some interesting stuff (changing papel/scratchy rates, enable angel event...)

I'm still struggling with the pang_event and exp_event though, I manage to execute them, give them a different value (5 for example) but don't see any effect ingame yet.

Pang and Exp rate default is 100 if u wanna change 200 = x2
Posted via Mobile Device

Quote:

---

Originally Posted by top1

Pang and Exp rate default is 100 if u wanna change 200 = x2
Posted via Mobile Device

---

You could run the x2 rate?

Yep it works
Try arg1 400 for x4 from normal Exp(100)
Posted via Mobile Device

I tried that, the value in Server_List was 2000 and i didnt get much more then i would with 100

Normally you cannot get more than XP x8. And since S3 the max was set to XP x4. I supposed it must be activated somewhere else to get more than x4 or x8.
Have you check the XP rate in the DB in the server status ?

Edit: i'm actually at work so i cannot test or screen or give you the exact table to check.

Quote:

---

Originally Posted by top1

Yep it works
Try arg1 400 for x4 from normal Exp(100)
Posted via Mobile Device

---

I will test it on my server to be sure and update my post with the result.

Quote:

---

Originally Posted by top1

Yep it works
Try arg1 400 for x4 from normal Exp(100)
Posted via Mobile Device

---

What would the command to leave the server with 2x exp? the command column which would be worth?

Here is how exp and pang rates work:

Quote:

---

Originally Posted by Exprate

USE Pangya_S4_TH
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (16, 400, 20201)

---

This will set the Exprate to x4 (400 = 400% exp)

Quote:

---

Originally Posted by Pangrate

USE Pangya_S4_TH
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (15, 400, 20201)

---

This will set the Pangrate to x4 (400 = 400% Pang)

Be sure to type "cmdon" in the Authserver console if you haven't already.

If you set Arg2 = 1 for command 15 or 16, you'll get the server indicator icons on the server list that the Pang and EXP event are running.

Also: You don't need to type cmdon in the Auth server for the commands to work.

fought very much at all 2 friends ... was a great help.

Hmm i guess i was wrong then :)

Im glad we figured out the rates tho!
Posted via Mobile Device

Quote:

---

Originally Posted by Tsukasa

If you set Arg2 = 1 for command 15 or 16, you'll get the server indicator icons on the server list that the Pang and EXP event are running.

Also: You don't need to type cmdon in the Auth server for the commands to work.

---

I left Arg2 at 0 and the icons show up on my serverlist just fine.

including arg1 and target

---------- Post added at 04:21 PM ---------- Previous post was at 04:17 PM ----------

can anyone tell me what angel event uses for ?

Yes my question also to use the event Angel Projectg need to change? or change any of Pak. ?

Angel Event is also known as QR Event.
Every game you finish, removes one game from your Quit Rate count, lowering your quit rate progressively.

Because Angel Wings require 3.0% quit rate or lower, NTreev called this event the "Angel Event".


I also have been thinking about a tool to do this manually...and came up with an idea to look into making a small tool that basically lets you insert stuff into the Pangya_Server_Command Table and possibly the Pangya_Notice_List table as well.
If I'm right this is all you need to make it work.

I'm gonna dig up my C# skills and see what I can do.

Go for it, Sarah! Let us know how it goes, and thanks everyone for the information in this thread!

Does anyone know how long these last? It seems by our second game the EXP double didn't seem to hold effect. (I switched the values to 200) I know for fact the first game they did because we received a LOT of EXP.

I have the event running on my server, and it still works after 50-60 games played...

There should be no problem maintaining the events.

me too over 3 days

---------- Post added at 07:02 AM ---------- Previous post was at 05:18 AM ----------

anyone know how EXECUTE_SERVER_SERVICE_CONTROL do ?

try installing gameserver as a windows-service and i bet you will find out?

how ?
chreadie did you have msn ?
pm me or post here please

can anyone tell me how to drop item on every map ?

Quote:

---

Originally Posted by top1

how ?
chreadie did you have msn ?
pm me or post here please

---

Try reading this: Windows service - Wikipedia, the free encyclopedia

---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------

Quote:

---

Originally Posted by top1

can anyone tell me how to drop item on every map ?

---

Try command 18 with 1000 as parameter

how do we know what the item its droped ?

A gift pops out of the hole?
Can't miss it.

i think he wants to know how to decide what item pops out

yes, A gift out of hole , has anyone done it yet ?
or it couldn't ??

1 open authserver and enter cmdon

2 SQL

USE Pangya_S4_TH
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (15, 300, 20201)
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (16, 700, 20201)
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (19, 1, 20201)
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (20, 150, 20201)
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (53, 1, 20201)


3xPang
7xexp
angel event
rain 15%
open ghost


3run loginserver & Gameserver

sorry for my english XD

Quote:

---

Originally Posted by zhouyibin

1 o
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (20, 150, 20201)
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (53, 1, 20201)

rain 15%
open ghost

---

15% of chance to have rain ?

command 53: enable ghost VS ?

Does this stays when we restart the client?

And, any way to change the combo for angel from 500 to 100 games played?

With the GM_tools commands, i have re-activated the lotteries.
Dropping cheeks from the black papel and premium card removers from scratchy.

Quote:

---

Originally Posted by PHOENIXXXX

With the GM_tools commands, i have re-activated the lotteries.
Dropping cheeks from the black papel and premium card removers from scratchy.

---

You probably increased the rates in papel shop / scratchy, making the rare items pop out more often. They always have been there.

Thank You

I want to use Notice . Where to activate it.



Sorry I'm not good at English.

put the message in pangya_notice_list then you will get Idx for the message
finally put the command in Pangya_server_command put command=0 arg1=Idx you got and target= port your server

Anyone found out the command id for the lottery please?

Thanks

how to change room in tournament 100 player ?

Quote:

---

Originally Posted by demonsoul

how to change room in tournament 100 player ?

---

Only a GM account can do that (capability = 4)

This is off-topic :/

@codyx: 1) what do you mean? 2) use the search button

Quote:

---

Originally Posted by bubbastic

Only a GM account can do that (capability = 4)

This is off-topic :/

@codyx: 1) what do you mean? 2) use the search button

---

Thank u

Quote:

---

Originally Posted by bubbastic

Only a GM account can do that (capability = 4)

This is off-topic :/

@codyx: 1) what do you mean? 2) use the search button

---

I am trying to find out how to change the papel lottery drop rate.
Scratch, pang, XP, event are working good and thanks for the people that find it out.
I thought the drop rate from papel was the command ID 24^^ or do I need more args on it^^

Code:

---

USE Pangya_S4_TH
INSERT INTO Pangya_Server_Command (Command, Arg1, Target)
VALUES (24, 400, 20201)

---

but it doesn't work. So Jackpot is something I didn't found out yet.
I know there is a GM tool that got released but as Sarah wrote, giving power to a software that we don't 100% trust should be avoided. SQL can be too easily manipulated.

Thanks in advance for the help,
codyx

------------------------------------------------------------------------------------
ok I found out int the GMtool^^ Hope it can help the next ones.

Code:

---

num3 = &H15
        num = Conversions.ToInteger(Me.rtBogoR.SelectedItem)
        num2 = Conversions.ToInteger(Me.rtBogoC.SelectedItem)
        conn.Query = String.Concat(New String() { "INSERT INTO [Pangya_Server_Command] ([Command],[Arg1],[Arg2],[Target],[ReserveDate],[RegDate]) VALUES('", Conversions.ToString(num3), "','", Conversions.ToString(num), "','", Conversions.ToString(num2), "','", str4, "','", str, "','", str3, "')" })

---

o.o how do u registure for it?