Gmtool_cmd

----- ****.ei.tmp after GMTOOL_CMD18
2011-02-13 21:40:41 1 Yunko 0 [N_ITEMDROP] GMTOOL_CMD18 : Rate(4/1000)
------ GameServer Window after GMTOOL_CMD50
2011-02-13 21:56:11 EXECUTE_MAPEVENT_RELOAD

It seems Authserver takes whats inside Pangya_Server_Command and turns it into GMTOOL_CMD commands.

Simply input values in the table named above and inside AuthServer type cmdon, then check GameServer logs.



To be able to see mapevent_reload in gameserver window you need to input LOG_ON in the gameserver window first.


To do whats in the screenshot, simply input:
command: 1
arg1: 1
arg2: 1
arg3: 1
arg4: 1
arg5: SOME-TEXT
target: GUID-OF-GAMESERVER
RegDate: SOME-DATE
ReserveDate: NULL


Found some stuff (If you use OllyDbg you can search for "EXECUTE_" and see what command it is):

GameServer:

Quote:

---

0 = Notice (with the right parameters)
1 = EXECUTE_SERVER_SHUTDOWN
2 = EXECUTE_SERVER_CANCEL_SHUTDOWN
3 = EXECUTE_SERVER_SERVICE_CONTROL(1)
9 = EXECUTE_RELOAD_IFF
10 = EXECUTE_KICK_PLAYER(1)
11 = EXECUTE_UPDATE_PATCH_VERSION(test)
12 = EXECUTE_CHANGE_QUEST_FLAG(1,1)
13 = EXECUTE_CHANGE_QUESTDROP_PROB(1,1)
14 = EXECUTE_CHANGE_QUESTDROP_FLAG(1,1)
15 = EXECUTE_PANG_EVENT(1)
16 = EXECUTE_EXP_EVENT(1)
17 = EXECUTE_CHANGE_EVENT_FLAG(1)
18 = rate
19 = EXECUTE_ANGEL_EVENT(1)
20 = EXECUTE_RAIN_EVENT(0.1)
21 = EXECUTE_BONGDARISHOP_RATIO(Rate:1, Cookie:1) + EXECUTE_BONGDARISHOP_RATIO(1,1)
22 = EXECUTE_MAP_PANG_EVENT(1,1)
23 = EXECUTE_CHANGE_SERVER_ICON(1)
24 = EXECUTE_JACKPOT(1)
25 = EXECUTE_SCRATCH_RATIO(1)
28 = EXECUTE_GIFT_DROP
29 = EXECUTE_XMAS_SOCK_DROP(1)
30 = EXECUTE_NEWYEAR_MONEY(drop:1, rare:1)
33 = EXECUTE_EVENT_GIFTBOX(drop:1, rare:1)
36 = EXECUTE_EVENT_SET_STATE(event on)
50 = map event rate (doesnt work thru this?)
51 = EXECUTE_SET_GAUGETIME
52 = EXECUTE_SET_MAPGAUGE(event %s)
53 = EXECUTE_GHOST_SERVICE(OK, SERVICE ENABLED)
100 = Thai ItemDrop Multiply %s
101 = Thai Exp Multiply %s
102 = Thai ExpRate Changed from %d to %d
103 = Thai NetCafe Pang Double %s
104 = SET JACKPOT MODE user count : 1
105 = CANCLE JACKPOT MODE
106 = Golden time auto select event STOP
107 = Golden time auto select event RESUME

---

LoginServer

Quote:

---

1 = EXECUTE_SERVER_SHUTDOWN
2 = EXECUTE_SERVER_CANCEL_SHUTDOWN
6?
7?
26 = Limited Login
27 = alluserlogin

---

nice one chreadie but some explanations would be appreciated and useful.

At GM_CMD should be where the rate of change and pang xp server?

chreadie, once again a good job on discovering this.

This might be a good lead to more gm/admin commands.
As for the question about xp / pang rates.
It is very well possible that this is the way to change them.
Although we are of course not sure.

But while we're talking about xp rates...I'm wondering the value that the gameserver sends to the db (new experience points) is it based on what the client sends?
Because while digging through .iff files i found a simple textfile that contains the required exp for each level.
If you edit that textfile and take 50% off each level's required exp, would it behave as x2 rates for example?

Quote:

---

Originally Posted by X_Sarah_X

chreadie, once again a good job on discovering this.

This might be a good lead to more gm/admin commands.
As for the question about xp / pang rates.
It is very well possible that this is the way to change them.
Although we are of course not sure.

But while we're talking about xp rates...I'm wondering the value that the gameserver sends to the db (new experience points) is it based on what the client sends?
Because while digging through .iff files i found a simple textfile that contains the required exp for each level.
If you edit that textfile and take 50% off each level's required exp, would it behave as x2 rates for example?

---

You could say that, the exp-file is just a way to keep track of the amount of exp for each lvl.

---------- Post added at 01:15 AM ---------- Previous post was at 01:13 AM ----------

I hope this update helps :)

Now im going to bed late because i discovered this :D

I've been messing around with it a little.
I managed to get the Angel Event running on my server.
It shows the angel symbol on server select and removes 1 QR-game after each game I play.

I'm looking into Pang event and Exp event at the moment. I can get them executed, with different values (i expect this is the rate) but haven't seen a difference ingame yet.

I just noticed that some of the text has been cut off.

0 is notice
1 is server shutdown
2 is server control

Ill fix it when i get home from work
Posted via Mobile Device

im waiting for u

play around with it?.....

im still at work.

yes i've played around with it but it seemed a freak character when i notice

try changing args, ollydbg gameserver.exe and see what it wants for input

when you back home ?

---------- Post added at 01:22 PM ---------- Previous post was at 01:21 PM ----------

i'm not good in olldydbg

To use command 0 you need to add a message to Pangya_Notice_List and supply Arg1 with the Idx of the notice you want to play.

i love you tsukasa

---------- Post added at 02:06 PM ---------- Previous post was at 01:54 PM ----------

tsukasa , how can i do a replaycount ?

now b2t :) The Regdate column of the Pangya_Server_Command table lets you choose WHEN a command shall be executed. Current_Timestamp or NULL will lead to the next full minute.

Code:

---

EXECUTE_EVENT_MAPGAUGE(event %s)
EXECUTE_SET_GAUGETIME
EXECUTE_EVENT_SET_STATE(event %s)
EXECUTE_MAPEVENT_RELOAD
EXECUTE_EVENT_GIFTBOX(drop:%d, rare:%d)
EXECUTE_NEWYEAR_MONEY(drop:%d, rare:%d)
EXECUTE_XMAS_SOCK_DROP(%d)
EXECUTE_GIFT_DROP
EXECUTE_JACKPOT(%d)
EXECUTE_CHANGE_SERVER_ICON(%d)
EXECUTE_SCRATCH_RATIO(%d)
EXECUTE_MAP_PANG_EVENT(%d,%d)
EXECUTE_BONGDARISHOP_RATIO(%d,%d)
EXECUTE_RAIN_EVENT(%.1f)
EXECUTE_ANGEL_EVENT(%d)
EXECUTE_RELOAD_IFF
EXECUTE_CHANGE_EVENT_FLAG(%d)
EXECUTE_EXP_EVENT(%d)
EXECUTE_PANG_EVENT(%d)
EXECUTE_CHANGE_QUESTDROP_FLAG(%d,%d)
EXECUTE_CHANGE_QUESTDROP_PROB(%d,%d)
EXECUTE_CHANGE_QUEST_FLAG(%d,%d)
EXECUTE_KICK_PLAYER(%d)
EXECUTE_SERVER_SERVICE_CONTROL(%d)
EXECUTE_UPDATE_PATCH_VERSION(%s)
EXECUTE_SERVER_CANCEL_SHUTDOWN
EXECUTE_SERVER_SHUTDOWN(%d)
EXECUTE_BROADCAST_NOTICE(%d)
EXECUTE_GHOST_SERVICE(OK, SERVICE %s)

---

This should be all Available Commands (without command codes)