Can't connect the server

first sorry fo my english

i open the server , all ON Ok, but i download the client in this page
i change the ip to 127.0.0.1

but the client says Disconected from the server...

all server work fine and firewall is off

How configure the client :S:S???

why 127.0.0.1 it iwll never work with that IP. use lan ip or WAN ip and be sure u opened ports 44405 and 55901 if u use wan ip.

use hex editor. change it with your lan ip

i was turn off the firewall and open from modem & router the ports..but see connectserver.exe
http://img171.imageshack.us/img171/8...orservermu.png

But have you Hexed as Mike0000 says?

how hex the main? i use main cracker too ...

Quote:

---

Originally Posted by thedarking

how hex the main? i use main cracker too ...

---

Download hex editor Neo, search for Connect and edit the first and last IP there

the problem is a connectserver.exe he is blocking & closing the conection...how can fix this???

y hexid the main too...

---------- Post added at 11:31 AM ---------- Previous post was at 11:22 AM ----------

whe open the client the "connectserver.exe " says closing connection..see picture in top of post

what problem have the program... for what reason close my connection of the server???

use another cs.exe use the CS from BOR.

Quote:

---

Originally Posted by thedarking

how hex the main? i use main cracker too ...

---

Here's AT LEAST one guide for Hexing the main, because i've seen it in tutorials section.