[Re-posted Tutorial] Hrace009's Vbox Image PW 1.3.6 with 1.4.2.

Since Hrace009's Mediafire folder was locked and links to the correct Gshop.data and Elements.data were also nuked, I felt it was necessary to restate the whole tutorial since his was soo butchered with unfortunate events, Post Deletion , and the spam of questions
Note: If you cannot see the screenshots in this post, Simply click them to enlarge.

http://download.virtualbox.org/virtu...-56127-Win.exe
Download that

Download parts 1 - 10 Here Free File Hosting Made Simple - MediaFire

Download theese 5 parts from evilgenx's post :
MEGAUPLOAD - The leading online storage and file delivery service
MEGAUPLOAD - The leading online storage and file delivery service
MEGAUPLOAD - The leading online storage and file delivery service
MEGAUPLOAD - The leading online storage and file delivery service
MEGAUPLOAD - The leading online storage and file delivery service

Download this
Elements.data And Gshop.data Clientside.rar




Once all of thoose downloads finish

Run Vbox's installation.

Once its installed
Extract the Image from the 10 part download to your Desktop
Then on Vbox, Import the Image, And if you put it on your desktop
finding it should be easy

In Vbox, Go up to the top and Click File>Prefrences>Network
And once you've gotten here click the little screw driver on the side thats orange

Make sure its set to this :
http://i52.tinypic.com/24v5r9u.png
Click Ok

Now that you have configured Vbox it is time to Configure the image itself

On the main Vbox menu , Click the Yellow Gear then go to Network,
Under the Advanced arrow, Make sure your settings are :
http://i52.tinypic.com/6ehh8p.png


Once you've made sure those settings are correct press the green start arrow on Vbox's main page


You will get a command prompt-looking box, let it load, Clicking Ok to whatever windows might pop up, Until you will come to a screen looking like this
http://i51.tinypic.com/2eg9z10.png

Login : root
Password : hrace009

As you type the password it will not show up but it is typing, It confused me at first too

Okay once youve logged in,

Let it load until it says something like
"root@pwharce009:"
Or something
Once that appears you can now start up PwAdmin
type the following : ./tomcat_start.sh


Let it load until it says its done
then go in your internet browser and go here : http://192.168.0.10:8080/pwAdmin/

Minimize the internet browser

And find your HGN Client 5 Parts that you downloaded

Install that client
And replace its Gshop.data and Elements.data with the one provided in the "Elements.data And Gshop.data Clientside.rar" That you should have downloaded

Once you have done that
Go to HGN Client/element/userdata/server and delete both of the files in there and place this file in there : serverlist.txt

Once you have done all of this
Maximize your internet browser again
And if it says you need to log in to use Server Control

Login with this : hrace009


Once you have logged in
Click Server Control
And on the Left panel, Click Start, Give it about 20 seconds, then go under Accounts and register, Give yourself GM Rights, Whatever you need to do then log in and have fun.




Additional links and stuff you might need:

http://192.168.0.10/adminer/
http://forum.ragezone.com/f694/pw-to...-343-a-666040/
http://forum.ragezone.com/6353460-post4.html
Perfect World Database





Thank Hrace009, Roluman, and everyone who contributed to make this release and these tools/files/etc.




PS: Can this be stickied so that the old Hrace009 thread can be virtually re-done since his folder was jacked and theres soo many people asking for help on his old one


-Taylor

does anyone know if this includes the latest updates to the PW client?

No the client posted here is the HGN client which is fairly old now.
http://forum.ragezone.com/f694/hgn-f...client-639679/

Hraces server files are also fairly old now as well and haven't been updated in a long time so will be missing a lot of fixes and things.

is there an easy way to update this?

http://192.168.0.10/adminer/

gives this error:

Incorrect password.
(I'm using hrace009/hrace009 also tried root/root.)

root/hrace009

guys. how to edit client, character, and armor + weapon

Pless I hope you can helpme

I very Need

Client HGN link mediafire PLZZZZ

Quote:

---

Originally Posted by TaylorIsCrazy

Okay once youve logged in,

Let it load until it says something like
"root@pwharce009:"
Or something
Once that appears you can now start up PwAdmin
type the following : ./tomcat_start.sh


Let it load until it says its done
then go in your internet browser and go here : http://192.168.0.10:8080/pwAdmin/

Minimize the internet browser

---

When I try to load the page for pwAdmin, I get this error:

The connection has timed out. The server at 192.168.0.10 is taking too long to respond.
I've tried loading it in different browsers and still got the same error.

If anyone could please tell me what I'm doing wrong, that would be great.

**I figured it out, so nvm :)

i have a question, when i run Virtual box, and run Hrace009 server it says Network Error, and i cant run the pwAdmin? any one know what im doing wrong? should i change out the ip?

Nvm i got it :)

Quote:

---

Originally Posted by panca

guys. how to edit client, character, and armor + weapon

Pless I hope you can helpme

I very Need

---

http://forum.ragezone.com/f694/item-...erator-711597/


use this tool to put the stats on it you want
then copy all that number junk and slap it in pw admin and if you dont know what im talking about then you are not educated enough to be making a server just yet.


x3

---------- Post added at 03:35 AM ---------- Previous post was at 03:34 AM ----------

Quote:

---

Originally Posted by Psytrac

is there an easy way to update this?

---

It is already 1.3.6 patched 1.4.2 and if your going to go through the trouble to update it it just be easier to make a whole new image ijs o.o

http://imageshack.us/photo/my-images/834/unledddq.png/

can some1 help me?...

What's wrong?
Mount it with vmware @@

Quote:

---

Originally Posted by Nikol@

What's wrong?
Mount it with vmware @@

---

why isnt working with VBOX?

Because that's vmware extension, not from vbox lol :)

Quote:

---

Originally Posted by Nikol@

Because that's vmware extension, not from vbox lol :)

---

...

Virtualbox does support vmdk disk images...

See the OVF file there? Import it with Virtualbox (provided version you are using isn't ancient) and it will run just fine...

Quote:

---

Originally Posted by das7002

...

Virtualbox does support vmdk disk images...

See the OVF file there? Import it with Virtualbox (provided version you are using isn't ancient) and it will run just fine...

---

thank u verrry much das is working...i had to install the newest version of VBOX...i hope i get no errors and can open the server with no problmes

---------- Post added at 07:51 PM ---------- Previous post was at 07:37 PM ----------

[url=http://imageshack.us/photo/my-images/718/unledasc.png/]ImageShack

---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------

[url=http://imageshack.us/photo/my-images/718/unledasc.png/]ImageShack

---------- Post added at 08:29 PM ---------- Previous post was at 07:52 PM ----------

some1 please help meh?..

Quote:

---

Originally Posted by dolke

thank u verrry much das is working...i had to install the newest version of VBOX...i hope i get no errors and can open the server with no problmes

---------- Post added at 07:51 PM ---------- Previous post was at 07:37 PM ----------

ImageShack

---------- Post added at 07:52 PM ---------- Previous post was at 07:51 PM ----------

ImageShack

---------- Post added at 08:29 PM ---------- Previous post was at 07:52 PM ----------

some1 please help meh?..

---

http://forum.ragezone.com/f452/help-...6/#post6522628

Is Download parts 1 - 10 Here Free File Hosting Made Simple - MediaFire a split file or do i just import all 10 separate? The reason i am asking is that when i try to marge them i get error... split file not detected.

how can i login to DB if i need to add level of an player or change item stats ?

Quote:

---

Originally Posted by Aenoox

how can i login to DB if i need to add level of an player or change item stats ?

---

Use PwAdmin

Quote:

---

Originally Posted by Nikol@

Use PwAdmin

---

rlly ? than say me how can i level up a GM with pwAdmin, fix GM sellers,rename player,add new upgrades,edit (example wing speed) and more
or how to connect to batGM

S e a r c h ! !

Im learning with linux and dont found anything i was allready searching dear !!!

Quote:

---

Originally Posted by DigitalChaos

Is Download parts 1 - 10 Here Free File Hosting Made Simple - MediaFire a split file or do i just import all 10 separate? The reason i am asking is that when i try to marge them i get error... split file not detected.

---

what file got error?
Posted via Mobile Device

If someone have free time than update it pls with new files and new pwAdmin + fix that NPC sellers

I cant conect to the pwadmin server what should i do??

Quote:

---

Originally Posted by vitorigo

I cant conect to the pwadmin server what should i do??

---

I am having the same problem of not being able to connect to the pwAdmin server. I am stuck at this step:

Quote:

---

Let it load until it says its done
then go in your internet browser and go here : http://192.168.0.10:8080/pwAdmin/

---

I have followed all of the steps up to this point and the server says that it is running, however, when I type ifconfig in the vbox, it says that the inet is :127.0.0.1
in other words, no ip address is assigned. How can I fix this and is this thread still active?
Thanks

Hi all!

I found a solution, how u can public your server.

If u have router (router ip example: 192.168.1.1, computer: 192,168.1.2)
First:

Quote:

---

nano /etc/network/interfaces

---

Ip: (example) 192.168.1.3
Network: 192.168.1.0
Gateway: 192.168.1.1
Broadcast: 192.168.1.255
DNS: 192.168.1.1

Second:

Quote:

---

nano /etc/resolv.conf

---

DNS:192.168.1.1

Third:

Quote:

---

nano /etc/hosts

---

Change all ip to 192.168.1.3 (expect localhost)

Fourth:
WinSCP
Host: 192.168.1.3
User: root
Pw: hrace009
In file manager go to PW folder and change all '192.168.0.10' ip in config files to 192.168.1.3
Then /etc folder and do the same like in my last sentence.
Close the file manager and restart the server.

Fifth:
Open ports (80,8080, 29000) on your router.
http://portforward.com/

Sixth:
Change ip in serverlist.txt to your external ip, (http://www.whatismyip.org/) and in dbserver.conf (yourdrive:/perfect world/elements)

Seventh:

Quote:

---

Enjoy, and sorry for crap english:blushing:

---

indeed,... basic networking... :wink:

Quote:

---

Originally Posted by 343

indeed,... basic networking... :wink:

---

if basic networking, then why no tutorial for it?

Quote:

---

Originally Posted by axelcro

if basic networking, then why no tutorial for it?

---

Well, technically there should not 'have ' to be one here since this is a forum for PW development specifically. However, I was still previously nice enough to attempt to start/sum up a basic networking guide quite a while ago here, IDK how you missed it since it IS stickied =\

http://forum.ragezone.com/f695/absol...6/#post6038760

One could also try, oh IDK, something like this:

Click Here!

@axelcro:
ty for the info. I know that this is all basic networking information, but it has been awhile since doing any networking in linux and especially through virtualbox. I will try with the information provided to get it going again. If not, then I will try 343's release (I tried to download that last night, but it stated that the files werent available to download).

OK I tried again and have the server up on 192.168.0.10. However, still unable to connect to the pwAdmin. When I run netstat -a in a dos box (not on the server, but same results) I get this:

Quote:

---

Active Connections

Proto Local Address Foreign Address
TCP 0.0.0.0:135 Clown:0
TCP 0.0.0.0:445 Clown:0
TCP 0.0.0.0:554 Clown:0
TCP 0.0.0.0:2508 Clown:0
TCP 0.0.0.0:2869 Clown:0
TCP 0.0.0.0:3261 Clown:0
TCP 0.0.0.0:5357 Clown:0
TCP 0.0.0.0:10243 Clown:0
TCP 0.0.0.0:49152 Clown:0
TCP 0.0.0.0:49153 Clown:0
TCP 0.0.0.0:49154 Clown:0
TCP 0.0.0.0:49156 Clown:0
TCP 0.0.0.0:49164 Clown:0
TCP 127.0.0.1:2559 Clown:0
TCP 127.0.0.1:3260 Clown:0
TCP 127.0.0.1:5939 Clown:0
TCP 127.0.0.1:49162 Clown:49163
TCP 127.0.0.1:49163 Clown:49162
TCP 192.168.0.10:139 Clown:0
TCP 192.168.2.4:139 Clown:0
TCP 192.168.2.4:3260 Clown:0
TCP 192.168.2.4:53757 50:http
TCP 192.168.2.4:54081 nuq04s06-in-f17:http
TCP 192.168.2.4:54082 nuq04s08-in-f2:https
TCP 192.168.2.4:54110 pz-in-f125:5222
TCP 192.168.2.4:54112 nuq04s09-in-f1:http
TCP 192.168.2.4:54114 nuq04s07-in-f9:http
TCP 192.168.2.4:54115 mrs02s01-in-f31:http
TCP 192.168.2.4:54119 nuq04s08-in-f6:http
TCP 192.168.21.1:3260 Clown:0
TCP [::]:135 Clown:0
TCP [::]:445 Clown:0
TCP [::]:554 Clown:0
TCP [::]:2869 Clown:0
TCP [::]:5357 Clown:0
TCP [::]:10243 Clown:0
TCP [::]:49152 Clown:0
TCP [::]:49153 Clown:0
TCP [::]:49154 Clown:0
TCP [::]:49156 Clown:0
TCP [::]:49164 Clown:0
UDP 0.0.0.0:3702 *:*
UDP 0.0.0.0:3702 *:*
UDP 0.0.0.0:5004 *:*
UDP 0.0.0.0:5005 *:*
UDP 0.0.0.0:5355 *:*
UDP 0.0.0.0:57780 *:*
UDP 127.0.0.1:1900 *:*
UDP 127.0.0.1:44301 *:*
UDP 127.0.0.1:48000 *:*
UDP 127.0.0.1:48001 *:*
UDP 127.0.0.1:61949 *:*
UDP 192.168.0.10:137 *:*
UDP 192.168.0.10:138 *:*
UDP 192.168.0.10:1900 *:*
UDP 192.168.0.10:61948 *:*
UDP 192.168.2.4:137 *:*
UDP 192.168.2.4:138 *:*
UDP 192.168.2.4:1900 *:*
UDP 192.168.2.4:61947 *:*
UDP [::]:3702 *:*
UDP [::]:3702 *:*
UDP [::]:5004 *:*
UDP [::]:5005 *:*
UDP [::]:5355 *:*
UDP [::]:57781 *:*
UDP [::1]:1900 *:*
UDP [::1]:61946 *:*
UDP [fe80::64e0:7f98:a156:7591%16]:1900 *:*
UDP [fe80::64e0:7f98:a156:7591%16]:61944 *:*
UDP [fe80::bdbf:1866:e7f:61ed%25]:1900 *:*
UDP [fe80::bdbf:1866:e7f:61ed%25]:61945 *:*

---

As you can see, there is no port 8080 open for me to connect to. Can someone please provide some assistance?
Thank you in advance
WyCKyD

Update to situation. While running ifconfig, I get an address now instead of the loopback of 127.0.0.1, but am still unable to see that the port is open. I am running Win7 Ultimate and I have the VirtualBox allowed through the firewall.

Alright


On the step where I said change the settings under preferences to 192.168.0.1 I forgot to mention that you have to go to adapters in control panel and change the ivp4 settings from 192.168.56.1 to 192.168.0.1 otherwise everytime you change it to 192.168.0.1 in vbox it will change it back to 192.168.56.1 because of what windows has it set to

how can i to change exp rate?

sorry for my bad english :laugh:

search !

Quote:

---

Originally Posted by mildlife

how can i to change exp rate?

sorry for my bad english :laugh:

---

here i help you Let me google that for you

hi why i cant download the server files???

helo pw client cant download alsoooo mehhhh???

Ok, so, I searched and read every post.
I still can't find a way to make it work.

I have the VBox running, it says the server is running, as well as the Apache and MYSQL. So it should be online, but it's not.

When I try to acess http://192.168.0.10:8080/pwAdmin/, trough Google Chrome, it's offline, can't acess the webpage, etc..

I configured the Vbox connections to 192.168.0.1, i went to Control Panel IPV4 settings and it's also 192.168.0.1, the other is 255.255.255.0 as well.

I just can't acess http://192.168.0.10:8080/pwAdmin/

Idk if it has something to do, but my usual IP is that one aswell, my router IP, the one I use to acess router page.

I also have Windows7, and the VBox Network is "Public Network" and not "Domestic Network".

Wonder if someone could help me with that, thanks a lot.

why when i import the files i get an error like this

The SHA 1 digest of'PW-Server-hrace009.vmdk
doesn't match to the one in 'PWServer-hrace009.mf

or picture

http://img519.imageshack.us/img519/9516/errorn.gif

help me pleaseee

help meeeeee http://img519.imageshack.us/img519/9516/errorn.gif


please!!!

Quote:

---

Originally Posted by admin1999

why when i import the files i get an error like this

The SHA 1 digest of'PW-Server-hrace009.vmdk
doesn't match to the one in 'PWServer-hrace009.mf

or picture

http://img519.imageshack.us/img519/9516/errorn.gif

help me pleaseee

help meeeeee http://img519.imageshack.us/img519/9516/errorn.gif


please!!!

---

i have the best fix for you Use 343's Release

what u mean 343 realease??

http://forum.ragezone.com/f694/compl...ackage-736572/

Please.. so hard isnt it.

Quote:

---

Originally Posted by 80085

http://forum.ragezone.com/f694/compl...ackage-736572/

Please.. so hard isnt it.

---

How You Download THe Server Files CLient And Other Download Links All Down:*:

Dude, they work perfect. NO links down.. seriously? Wtf you ever doing on the thread? Did you ever try download or?

please..

Ok, Number ONE - MY LINKS ARE NOT DOWN //facepalm

Number TWO - STOP HI-JACKING THEADS

ps: now are down :-X

DUH, mega-upload got shut down by the feds, DUH (oi)