Main Analyzer v2

Hello mates,
long time no see. As I remember, it was a good times styling weapons, sets and all kinds of stuff for MU :):
But today, I'll release my first program for MU. Of course some of your will say "there are similar programs already" or something like that.
But it's my first Byte Level program that I'm working on, and I ain't got that much of knowlage. I can say - I've gained some truly valuable experience. I've spent past 6 hours for this, not much if you compare it with anyone else who would do same thing at the speed of light, but it's a start - it always kinda goes like this :huh::laugh:

So basicly here's what it does:
It checks the main.exe for IP, Serial and Version with my original algorithm. Then you can edit these values and save the main.

I have tested it with only few different main.exe versions, so if you come across one that does something stupid - give me a heads up.

Maybe I'll add new features later, if you come up with any.

Hope I don't die for posting this :mellow::thumbup:

http://img207.imageshack.us/img207/2830/unledsf.png

Main Analyzer v1(2011-11-12):

• loads an IP Address, Serial Code and Version.
• allows you to edit your desired values in text boxes and then save the edited file.

Update to v2(2011-11-25):

• Main Analyzer now loads 6 IP Addresses instead of one. This allows to correctly changing the IP of the desired protocol.

Update to v2.1(2011-11-28):

• Main Analyzer now has Drag-n-Drop ability.
• Added exceptions to notify about errors.

P.S. .NET Framework 4.0 is needed.

Credits to me - gnomiux/Gyvastis :):

thanks for the share

Welcome to back :)
Thanks for release :)

Quote:

---

Of course some of your will say "there are similar programs already" or something like that.

---

As long as the only thing they do is flame and blame their posts should count 0 to you and anyone else. You know its your work, you're proud of your work, you know you learned something coding this application so you shouldn't care of them. Just report their shitty posts and moderators will take care of them.

Nice application and good luck in further versions/projects!

PS: Do your algorithm search by pattern or logical search?

Quote:

---

Originally Posted by [RCZ]ShadowKing

As long as the only thing they do is flame and blame their posts should count 0 to you and anyone else. You know its your work, you're proud of your work, you know you learned something coding this application so you shouldn't care of them. Just report their shitty posts and moderators will take care of them.

Nice application and good luck in further versions/projects!

PS: Do your algorithm search by pattern or logical search?

---

Thanks for the motivation :): I guess it's pattern-based, well I think it is:ehh:

Even if i don't use this kind of main programs(i always edit manually) i wanna say that for some mains it works, not on newer ones(s6) analyzer blocks. Also..it always shows me cs.muonline.in.th ip for japan mains and that is not the ip if u want to change it.
The serial and version its ok.

thanks for the share ...

Quote:

---

Originally Posted by duracel

Also..it always shows me cs.muonline.in.th ip for japan mains and that is not the ip if u want to change it.
The serial and version its ok.

---

eng mains the same

How can use this ?
and work for ?
please. tks

Quote:

---

Originally Posted by godhoang

How can use this ?
and work for ?
please. tks

---

Okey, I will try to explain as simply as possible, because it does a simple function.
It is used when you set up a server and you need to configure your main.exe - it allows you to set up your IP Address(so you can connect to your server) and Serial code (from Commonloc.cfg) to be equal to your servers. Also you can edit server version code if it's necessery.

Quote:

---

Originally Posted by <c>WebZen

eng mains the same

---

yes,i also find it,it always shows me cs.muonline.in.th ip mains and that is not the ip if i want to change it.
The serial and version its ok.
can you share the source code ? i am noob..

yes,i also find it,it always shows me cs.muonline.in.th ip mains and that is not the ip if i want to change it.
The serial and version it is ok.
can you share the source code ? i am noob.. and i just wanna it run with .net 2.0 instead of .net 4.0...

Ok, I'll make it so show all of the languages, when I have some free time, I thought it could be a problem :):

your program dont show the real ip address of main !

main chk?

Quote:

---

Originally Posted by boncha

your program dont show the real ip address of main !

---

Share your main.exe, it would be realy helpful. You can send me it in PM, if you do not want to do it here :):

Quote:

---

Originally Posted by gnomiux

Share your main.exe, it would be realy helpful. You can send me it in PM, if you do not want to do it here :):

---

the attachments is my main.exe .
its ip is 127.0.0.2
but your software show ip is cs.muonline.in.th :?:

Quote:

---

Originally Posted by chenshida666

the attachments is my main.exe .
its ip is 127.0.0.2
but your software show ip is cs.muonline.in.th :?:

---

You will now be able to manage your IP :):

Main Analyzer v2 released.

not work on 1.08B+

Quote:

---

Originally Posted by lemiks

not work on 1.08B+

---

Give me the main.exe :):

don't work on Windows xP sp3 + Main 1.03k :P

Quote:

---

Originally Posted by mx_pro

don't work on Windows xP sp3 + Main 1.03k :P

---

Please give me main.exe, so I could work on it :):

Quote:

---

Originally Posted by mx_pro

don't work on Windows xP sp3 + Main 1.03k :P

---

works perfectly in XP SP 2 and 3 (1.03k)


thanks gnomiux

Quote:

---

Originally Posted by gnomiux

You will now be able to manage your IP :):

Main Analyzer v2 released.

---

thx!now it's work good:thumbup1::thumbup1:

U can hex this main 1.08 Main.exe

Thanks for share.
This Release work with Main 1.07V+ :: 1.07x :: 1.07G+ I Think this work with 1.07 Mains
But with Main 1.08A don't work

Thank for your sharing.
But in my main, it don't work...Please check my main my friend !!!
Main.rar

Quote:

---

Originally Posted by conan3000

Thank for your sharing.
But in my main, it don't work...Please check my main my friend !!!
Main.rar

---

This is some kind custom main, witch has his hex in icmmain.dat. Please be notice that my program only takes regular main.exe :):

Quote:

---

Originally Posted by gnomiux

This is some kind custom main, witch has his hex in icmmain.dat. Please be notice that my program only takes regular main.exe :):

---

i understand :wink:...But with the kind of custom main like that...Can we crack? Do u have some methods to find out the ip, serial, and version of this custom main? Regards

Quote:

---

Originally Posted by conan3000

i understand :wink:...But with the kind of custom main like that...Can we crack? Do u have some methods to find out the ip, serial, and version of this custom main? Regards

---

The file is packed I guess, because when I open the file in hex, it does not make any sense and this is most likely when a protection and/or compression is applied. So you should check the packing type with RDG Packer Detector or some familiar program, and when the packing type and name is shown, you should search the world wide web for the ability to unpack it, then you could try searching for info in it :):

Quote:

---

Originally Posted by gnomiux

The file is packed I guess, because when I open the file in hex, it does not make any sense and this is most likely when a protection and/or compression is applied. So you should check the packing type with RDG Packer Detector or some familiar program, and when the packing type and name is shown, you should search the world wide web for the ability to unpack it, then you could try searching for info in it :):

---

Thanks for your reply!!! Actually, i'm not good at unpack custom main like this...I use RDG to deteck file icmmain.exe (i changed icmmain.dat to icmmain.exe) and it shows me
Borland C++ 1999
Protection Plus v x
aPLib compresion (Algoritmo)

And the way to unpack is not easy to me!!! I'm not programmers !!!:laugh: So can you help me to find out this custom main ??? :rolleyes:

Quote:

---

Originally Posted by conan3000

Thanks for your reply!!! Actually, i'm not good at unpack custom main like this...I use RDG to deteck file icmmain.exe (i changed icmmain.dat to icmmain.exe) and it shows me
Borland C++ 1999
Protection Plus v x
aPLib compresion (Algoritmo)

And the way to unpack is not easy to me!!! I'm not programmers !!!:laugh: So can you help me to find out this custom main ??? :rolleyes:

---

Sorry, that is as far as I can get you, because I am not familiar with unpacking:/: But hey, search for guides on Google, you should find your way out, or post a thread in Mu Online Help Section, coz this is getting a little off-topic :):

Thanks!

Little update to version 2.1 :):

thank you but i can use ip to chang my ip in my main.exe
i need to help chang ip the main.exe to 127.0.0.1 plase.
Main.exe

awesome work!

I'm sorry! My English is not good
You can do an edit Main.exe tools to support other languages​​?

Input file is invalid ? how to fix ?

yes,it's useful~thaks for share

Quote:

---

Originally Posted by palamon123

Input file is invalid ? how to fix ?

---

This message is shown, when the program fails to load file. You could share your main(maybe in PM) and we could figure it out :):

NICE, NICE and NICE!

;) 10/10

It gives me the wrong version, although the serial's right. Any help ?

Quote:

---

Originally Posted by TeppHD

It gives me the wrong version, although the serial's right. Any help ?

---

Give me your main.exe :]

Greatful!

Suport Main S6 and Main Ex700 ?

Main.exe Analyzer v2.2


http://freakshare.com/files/yt88ugr3...-v2.2.rar.html
http://bitshare.com/files/v7wa1czk/M...-v2.2.rar.html

mirrors

Good program for Main , Thank's gnomiux