Problem with Armor

Hi everyone! I did as instructed of vormav http://forum.ragezone.com/f399/exter...-table-715041/ and add a new armor (da227 - new item from KPT), all good, but when I use the new armor is found wrong, I use F9 and see "tmABCD \ mc009 "(char pri) that looks like armor lvl39, I tried adding a different armor" da127 "(char K9) and everything is happening so. I think there must be a file that controls the display of armor, like fix "weapons hold" in a thread somewhere else on 4rum, but I'm not sure what file it is or how to display armor properly, please help me!

Re: Problem with Armor

Armours are different, you need to add "look" of armour too.

look for table like this:

Code:

.data:0060E610 ; LPCSTR off_60E610 .data:0060E610 off_60E610 dd offset aA001_ini ; DATA XREF: sub_4436E0+39r .data:0060E610 ; sub_4437C0+A5r ... .data:0060E610 ; "A001.ini" .data:0060E614 dd offset aA001_ini ; "A001.ini" .data:0060E618 dd offset aA002_ini ; "A002.ini" .data:0060E61C dd offset aA003_ini ; "A003.ini" .data:0060E620 dd offset aA004_ini ; "A004.ini" .data:0060E624 dd offset aA005_ini ; "A005.ini" .data:0060E628 dd offset aA006_ini ; "A006.ini" .data:0060E62C dd offset aA007_ini ; "A007.ini" .data:0060E630 dd offset aA008_ini ; "A008.ini" .data:0060E634 dd offset aA009_ini ; "A009.ini" .data:0060E638 dd offset aA010_ini ; "A010.ini" .data:0060E63C dd offset aA011_ini ; "A011.ini" .data:0060E640 dd offset aA012_ini ; "A012.ini" .data:0060E644 dd offset aA013_ini ; "A013.ini" .data:0060E648 dd offset aA014_ini ; "A014.ini" .data:0060E64C dd offset aA015_ini ; "A015.ini" .data:0060E650 dd offset aA016_ini ; "A016.ini" [...]

You need to add .inx file to tmABCD folder, add name of this file to .exe and offset to that name.

Re: Problem with Armor

Quote:

Originally Posted by Vormav

Armours are different, you need to add "look" of armour too.

look for table like this:

Code:

.data:0060E610 ; LPCSTR off_60E610 .data:0060E610 off_60E610 dd offset aA001_ini ; DATA XREF: sub_4436E0+39r .data:0060E610 ; sub_4437C0+A5r ... .data:0060E610 ; "A001.ini" .data:0060E614 dd offset aA001_ini ; "A001.ini" .data:0060E618 dd offset aA002_ini ; "A002.ini" .data:0060E61C dd offset aA003_ini ; "A003.ini" .data:0060E620 dd offset aA004_ini ; "A004.ini" .data:0060E624 dd offset aA005_ini ; "A005.ini" .data:0060E628 dd offset aA006_ini ; "A006.ini" .data:0060E62C dd offset aA007_ini ; "A007.ini" .data:0060E630 dd offset aA008_ini ; "A008.ini" .data:0060E634 dd offset aA009_ini ; "A009.ini" .data:0060E638 dd offset aA010_ini ; "A010.ini" .data:0060E63C dd offset aA011_ini ; "A011.ini" .data:0060E640 dd offset aA012_ini ; "A012.ini" .data:0060E644 dd offset aA013_ini ; "A013.ini" .data:0060E648 dd offset aA014_ini ; "A014.ini" .data:0060E64C dd offset aA015_ini ; "A015.ini" .data:0060E650 dd offset aA016_ini ; "A016.ini" [...]

You need to add .inx file to tmABCD folder, add name of this file to .exe and offset to that name.

Great!!Vormav thanks a lot! you always have the great tutorial :D:

Quote:

Originally Posted by Vormav

Armours are different, you need to add "look" of armour too.

look for table like this:

Code:

.data:0060E610 ; LPCSTR off_60E610 .data:0060E610 off_60E610 dd offset aA001_ini ; DATA XREF: sub_4436E0+39r .data:0060E610 ; sub_4437C0+A5r ... .data:0060E610 ; "A001.ini" .data:0060E614 dd offset aA001_ini ; "A001.ini" .data:0060E618 dd offset aA002_ini ; "A002.ini" .data:0060E61C dd offset aA003_ini ; "A003.ini" .data:0060E620 dd offset aA004_ini ; "A004.ini" .data:0060E624 dd offset aA005_ini ; "A005.ini" .data:0060E628 dd offset aA006_ini ; "A006.ini" .data:0060E62C dd offset aA007_ini ; "A007.ini" .data:0060E630 dd offset aA008_ini ; "A008.ini" .data:0060E634 dd offset aA009_ini ; "A009.ini" .data:0060E638 dd offset aA010_ini ; "A010.ini" .data:0060E63C dd offset aA011_ini ; "A011.ini" .data:0060E640 dd offset aA012_ini ; "A012.ini" .data:0060E644 dd offset aA013_ini ; "A013.ini" .data:0060E648 dd offset aA014_ini ; "A014.ini" .data:0060E64C dd offset aA015_ini ; "A015.ini" .data:0060E650 dd offset aA016_ini ; "A016.ini" [...]

You need to add .inx file to tmABCD folder, add name of this file to .exe and offset to that name.

I found a table just like you said in client.exe, I tried to change a bit, it's quite fun :D:. But with the new armor is still the same (I mentioned above), I can change any old armor to display it differently, for example with char k9:
Phoenix Armor (da123) = mA022.ini, can I change it to mA023 (Frenzy Armor), mA024 (Highlander Armor), mA025 (Magic Armor - new armor), mA026 (Kronos Armor - new armor) .. ..... with the old armor can also do so. With the new armor is added, it always starts from **009.ini I can not change it even has more mA025.ini and mA026.ini (actually, I've replaced Cma001.ini = mA025. ini and Cma002.ini = mA026.ini), I think I have to do much more to add the new armor, can you tell me more?

Re: Problem with Armor

Quote:

Originally Posted by quanma

I found a table just like you said in client.exe, I tried to change a bit, it's quite fun :D:. But with the new armor is still the same (I mentioned above), I can change any old armor to display it differently, for example with char k9:
Phoenix Armor (da123) = mA022.ini, can I change it to mA023 (Frenzy Armor), mA024 (Highlander Armor), mA025 (Magic Armor - new armor), mA026 (Kronos Armor - new armor) .. ..... with the old armor can also do so. With the new armor is added, it always starts from **009.ini I can not change it even has more mA025.ini and mA026.ini (actually, I've replaced Cma001.ini = mA025. ini and Cma002.ini = mA026.ini), I think I have to do much more to add the new armor, can you tell me more?

I also have problems like you :(:

Re: Problem with Armor

I'm no longer using .ini files to load armours but I thing code where somewhere here:

Code:

004436E0 /$ 81EC 80000000 SUB ESP,80 004436E6 |. 53 PUSH EBX 004436E7 |. 8B1D 98405D00 MOV EBX,DWORD PTR DS:[<&KERNEL32.lstrcpy>; kernel32.lstrcpyA 004436ED |. 55 PUSH EBP 004436EE |. 8B2D 94405D00 MOV EBP,DWORD PTR DS:[<&KERNEL32.lstrcat>; kernel32.lstrcatA 004436F4 |. 56 PUSH ESI 004436F5 |. 57 PUSH EDI 004436F6 |. 33FF XOR EDI,EDI 004436F8 |> 33F6 /XOR ESI,ESI 004436FA |. 8D9B 00000000 |LEA EBX,DWORD PTR DS:[EBX] 00443700 |> 85F6 |/TEST ESI,ESI 00443702 |. 74 05 ||JE SHORT game.00443709 00443704 |. 83FE 0A ||CMP ESI,0A 00443707 |. 7C 2C ||JL SHORT game.00443735 00443709 |> A1 04D76000 ||MOV EAX,DWORD PTR DS:[60D704] 0044370E |. 50 ||PUSH EAX 0044370F |. 8D4C24 14 ||LEA ECX,DWORD PTR SS:[ESP+14] 00443713 |. 51 ||PUSH ECX 00443714 |. FFD3 ||CALL EBX 00443716 |. 8D1437 ||LEA EDX,DWORD PTR DS:[EDI+ESI] 00443719 |. 8B0495 10E66000 ||MOV EAX,DWORD PTR DS:[EDX*4+60E610] 00443720 |. 50 ||PUSH EAX 00443721 |. 8D4C24 14 ||LEA ECX,DWORD PTR SS:[ESP+14] 00443725 |. 51 ||PUSH ECX 00443726 |. FFD5 ||CALL EBP 00443728 |. 8D5424 10 ||LEA EDX,DWORD PTR SS:[ESP+10] 0044372C |. 52 ||PUSH EDX 0044372D |. E8 4EFEFFFF ||CALL game.00443580 00443732 |. 83C4 04 ||ADD ESP,4 00443735 |> 46 ||INC ESI 00443736 |. 83FE 12 ||CMP ESI,12 00443739 |.^7C C5 |\JL SHORT game.00443700 0044373B |. 83C7 42 |ADD EDI,42 0044373E |. 81FF 10020000 |CMP EDI,210 00443744 |.^7C B2 \JL SHORT game.004436F8 00443746 |. 5F POP EDI 00443747 |. 5E POP ESI 00443748 |. 5D POP EBP 00443749 |. B8 01000000 MOV EAX,1 0044374E |. 5B POP EBX 0044374F |. 81C4 80000000 ADD ESP,80 00443755 \. C3 RETN

Set BP's here, check if all your .ini (.inx) files are loaded,
try changing:
CMP EDI,210
to:
CMP EDI,252

Re: Problem with Armor

Quote:

Originally Posted by Vormav

I'm no longer using .ini files to load armours but I thing code where somewhere here:

Code:

004436E0 /$ 81EC 80000000 SUB ESP,80 004436E6 |. 53 PUSH EBX 004436E7 |. 8B1D 98405D00 MOV EBX,DWORD PTR DS:[<&KERNEL32.lstrcpy>; kernel32.lstrcpyA 004436ED |. 55 PUSH EBP 004436EE |. 8B2D 94405D00 MOV EBP,DWORD PTR DS:[<&KERNEL32.lstrcat>; kernel32.lstrcatA 004436F4 |. 56 PUSH ESI 004436F5 |. 57 PUSH EDI 004436F6 |. 33FF XOR EDI,EDI 004436F8 |> 33F6 /XOR ESI,ESI 004436FA |. 8D9B 00000000 |LEA EBX,DWORD PTR DS:[EBX] 00443700 |> 85F6 |/TEST ESI,ESI 00443702 |. 74 05 ||JE SHORT game.00443709 00443704 |. 83FE 0A ||CMP ESI,0A 00443707 |. 7C 2C ||JL SHORT game.00443735 00443709 |> A1 04D76000 ||MOV EAX,DWORD PTR DS:[60D704] 0044370E |. 50 ||PUSH EAX 0044370F |. 8D4C24 14 ||LEA ECX,DWORD PTR SS:[ESP+14] 00443713 |. 51 ||PUSH ECX 00443714 |. FFD3 ||CALL EBX 00443716 |. 8D1437 ||LEA EDX,DWORD PTR DS:[EDI+ESI] 00443719 |. 8B0495 10E66000 ||MOV EAX,DWORD PTR DS:[EDX*4+60E610] 00443720 |. 50 ||PUSH EAX 00443721 |. 8D4C24 14 ||LEA ECX,DWORD PTR SS:[ESP+14] 00443725 |. 51 ||PUSH ECX 00443726 |. FFD5 ||CALL EBP 00443728 |. 8D5424 10 ||LEA EDX,DWORD PTR SS:[ESP+10] 0044372C |. 52 ||PUSH EDX 0044372D |. E8 4EFEFFFF ||CALL game.00443580 00443732 |. 83C4 04 ||ADD ESP,4 00443735 |> 46 ||INC ESI 00443736 |. 83FE 12 ||CMP ESI,12 00443739 |.^7C C5 |\JL SHORT game.00443700 0044373B |. 83C7 42 |ADD EDI,42 0044373E |. 81FF 10020000 |CMP EDI,210 00443744 |.^7C B2 \JL SHORT game.004436F8 00443746 |. 5F POP EDI 00443747 |. 5E POP ESI 00443748 |. 5D POP EBP 00443749 |. B8 01000000 MOV EAX,1 0044374E |. 5B POP EBX 0044374F |. 81C4 80000000 ADD ESP,80 00443755 \. C3 RETN

Set BP's here, check if all your .ini (.inx) files are loaded,
try changing:
CMP EDI,210
to:
CMP EDI,252

Thank Vormav, this is code in my client.exe:

Code:

00441E00 /$ 81EC 80000000 SUB ESP,80 00441E06 |. 53 PUSH EBX 00441E07 |. 8B1D 34625C00 MOV EBX,DWORD PTR DS:[<&KERNEL32.lstrcpy>; kernel32.lstrcpyA 00441E0D |. 55 PUSH EBP 00441E0E |. 8B2D 3C615C00 MOV EBP,DWORD PTR DS:[<&KERNEL32.lstrcat>; kernel32.lstrcatA 00441E14 |. 56 PUSH ESI 00441E15 |. 57 PUSH EDI 00441E16 |. 33FF XOR EDI,EDI 00441E18 |> 33F6 /XOR ESI,ESI 00441E1A |. 8D9B 00000000 |LEA EBX,DWORD PTR DS:[EBX] 00441E20 |> 85F6 |/TEST ESI,ESI 00441E22 |. 74 05 ||JE SHORT game.00441E29 00441E24 |. 83FE 0A ||CMP ESI,0A 00441E27 |. 7C 2C ||JL SHORT game.00441E55 00441E29 |> A1 DCD45F00 ||MOV EAX,DWORD PTR DS:[5FD4DC] 00441E2E |. 50 ||PUSH EAX 00441E2F |. 8D4C24 14 ||LEA ECX,DWORD PTR SS:[ESP+14] 00441E33 |. 51 ||PUSH ECX 00441E34 |. FFD3 ||CALL EBX 00441E36 |. 8D1437 ||LEA EDX,DWORD PTR DS:[EDI+ESI] 00441E39 |. 8B0495 68E05F>||MOV EAX,DWORD PTR DS:[EDX*4+5FE068] 00441E40 |. 50 ||PUSH EAX 00441E41 |. 8D4C24 14 ||LEA ECX,DWORD PTR SS:[ESP+14] 00441E45 |. 51 ||PUSH ECX 00441E46 |. FFD5 ||CALL EBP 00441E48 |. 8D5424 10 ||LEA EDX,DWORD PTR SS:[ESP+10] 00441E4C |. 52 ||PUSH EDX 00441E4D |. E8 4EFEFFFF ||CALL game.00441CA0 00441E52 |. 83C4 04 ||ADD ESP,4 00441E55 |> 46 ||INC ESI 00441E56 |. 83FE 12 ||CMP ESI,12 00441E59 |.^ 7C C5 |\JL SHORT game.00441E20 00441E5B |. 83C7 36 |ADD EDI,36 00441E5E |. 81FF B0010000 |CMP EDI,1B0 00441E64 |.^ 7C B2 \JL SHORT game.00441E18 00441E66 |. 5F POP EDI 00441E67 |. 5E POP ESI 00441E68 |. 5D POP EBP 00441E69 |. B8 01000000 MOV EAX,1 00441E6E |. 5B POP EBX 00441E6F |. 81C4 80000000 ADD ESP,80 00441E75 \. C3 RETN

so just load the file from **010.ini to **018.ini. I do not understand, because when using the armor as "Phoenix Armor" still good even though it is mA022.ini (for char K9). I tried to change "CMP ESI,0A" to "CMP ESI,1" and "CMP ESI,12" to "CMP ESI,1B" but everything stays the same, the new armor is starting **009.ini also the old armor is still good. Can you just tell me what function definition armor and ini files of it?

Re: Problem with Armor

I thought about modifing those:

Quote:

00441E5B |. 83C7 36 |ADD EDI,36
00441E5E |. 81FF B0010000 |CMP EDI,1B0

My client have different values here and have all official armours. How many armours yours have? Try to adjust those values.

Code that will chose your .ini file is here:

Code:

004437C0 /$ A1 7050C501 MOV EAX,DWORD PTR DS:[1C55070] 004437C5 |. 81EC 00010000 SUB ESP,100 004437CB |. 56 PUSH ESI 004437CC |. 8BB424 0801000>MOV ESI,DWORD PTR SS:[ESP+108] 004437D3 |. 3BC6 CMP EAX,ESI 004437D5 |. 74 19 JE SHORT game.004437F0 004437D7 |. A1 B8C39400 MOV EAX,DWORD PTR DS:[94C3B8] 004437DC |. 8B88 74010000 MOV ECX,DWORD PTR DS:[EAX+174] 004437E2 |. 85C9 TEST ECX,ECX 004437E4 |. 75 0A JNZ SHORT game.004437F0 004437E6 |. 8A88 EC380000 MOV CL,BYTE PTR DS:[EAX+38EC] 004437EC |. 84C9 TEST CL,CL 004437EE |. 75 0A JNZ SHORT game.004437FA 004437F0 |> 33C0 XOR EAX,EAX 004437F2 |. 5E POP ESI 004437F3 |. 81C4 00010000 ADD ESP,100 004437F9 |. C3 RETN 004437FA |> 83FE FF CMP ESI,-1 004437FD |. 75 02 JNZ SHORT game.00443801 004437FF |. 33F6 XOR ESI,ESI 00443801 |> 83FE 41 CMP ESI,41 00443804 |. 57 PUSH EDI 00443805 |. 8BB8 40390000 MOV EDI,DWORD PTR DS:[EAX+3940] 0044380B |. 7E 05 JLE SHORT game.00443812 0044380D |. BE 41000000 MOV ESI,41 00443812 |> 83FF 08 CMP EDI,8 00443815 |. 7E 02 JLE SHORT game.00443819 00443817 |. 33FF XOR EDI,EDI 00443819 |> A1 04D76000 MOV EAX,DWORD PTR DS:[60D704] 0044381E |. 50 PUSH EAX ; /String2 => "char\tmABCD\" 0044381F |. 8D4C24 0C LEA ECX,DWORD PTR SS:[ESP+C] ; | 00443823 |. 51 PUSH ECX ; |String1 00443824 |. FF15 98405D00 CALL DWORD PTR DS:[<&KERNEL32.lstrcpyA>] ; \lstrcpyA 0044382A |. 8B15 B8C39400 MOV EDX,DWORD PTR DS:[94C3B8] 00443830 |. 8B82 38390000 MOV EAX,DWORD PTR DS:[EDX+3938] 00443836 |. 3D 00100000 CMP EAX,1000 0044383B |. 7E 1C JLE SHORT game.00443859 0044383D |. 3D 02100000 CMP EAX,1002 00443842 |. 7F 15 JG SHORT game.00443859 00443844 |. 8B04BD 90F6600>MOV EAX,DWORD PTR DS:[EDI*4+60F690] 0044384B |. 6BC0 42 IMUL EAX,EAX,42 0044384E |. 03C6 ADD EAX,ESI 00443850 |. 8B0C85 50EE600>MOV ECX,DWORD PTR DS:[EAX*4+60EE50] 00443857 |. EB 13 JMP SHORT game.0044386C 00443859 |> 8B04BD 90F6600>MOV EAX,DWORD PTR DS:[EDI*4+60F690] 00443860 |. 6BC0 42 IMUL EAX,EAX,42 00443863 |. 03C6 ADD EAX,ESI 00443865 |. 8B0C85 10E6600>MOV ECX,DWORD PTR DS:[EAX*4+60E610] 0044386C |> 8D5424 08 LEA EDX,DWORD PTR SS:[ESP+8] 00443870 |. 51 PUSH ECX ; /StringToAdd 00443871 |. 52 PUSH EDX ; |ConcatString 00443872 |. FF15 94405D00 CALL DWORD PTR DS:[<&KERNEL32.lstrcatA>] ; \lstrcatA 00443878 |. A1 B8C39400 MOV EAX,DWORD PTR DS:[94C3B8] 0044387D |. C780 74010000 >MOV DWORD PTR DS:[EAX+174],1 00443887 |. A1 B8C39400 MOV EAX,DWORD PTR DS:[94C3B8] 0044388C |. 8D88 EC380000 LEA ECX,DWORD PTR DS:[EAX+38EC] 00443892 |. 51 PUSH ECX 00443893 |. 8D5424 0C LEA EDX,DWORD PTR SS:[ESP+C] 00443897 |. 52 PUSH EDX 00443898 |. 50 PUSH EAX 00443899 |. E8 1290FEFF CALL game.0042C8B0 0044389E |. 83C4 0C ADD ESP,0C 004438A1 |. 5F POP EDI 004438A2 |. 8935 7050C501 MOV DWORD PTR DS:[1C55070],ESI 004438A8 |. B8 01000000 MOV EAX,1 004438AD |. 5E POP ESI 004438AE |. 81C4 00010000 ADD ESP,100 004438B4 \. C3 RETN

MOV ECX,DWORD PTR DS:[EAX*4+60E610]
This will point to offset to your .inx file.

Re: Problem with Armor

great, vormav :thumbup::thumbup:

Re: Problem with Armor

Vormav , how can I see if my new .ini have been loaded?
look,I have the same problem cuz when I add .ini to my game.exe I add the offset too , but it's still loading X011.ini..

some questions;

is there some rules for where .ini should be or order?
I have changed my CMP EDI,1B0 to an higher value but is not working and I changed all references to a "new table" with all offsets of .ini's contained my new .ini too

-----

well, "all references" including the that you quoted , look:

Quote:

004411A9 |> 8B04BD C08B5F0>MOV EAX,DWORD PTR DS:[EDI*4+5F8BC0]
004411B0 |. 6BC0 36 IMUL EAX,EAX,36
004411B3 |. 03C6 ADD EAX,ESI
004411B5 |. 8B0C85 5075580>MOV ECX,DWORD PTR DS:[EAX*4+4587550]
004411BC |> 8D5424 08 LEA EDX,DWORD PTR SS:[ESP+8]
004411C0 |. 51 PUSH ECX ; /StringToAdd
004411C1 |. 52 PUSH EDX ; |ConcatString
004411C2 |. FF15 3C115C00 CALL DWORD PTR DS:[<&KERNEL32.lstrcatA>] ; \lstrcatA

and that goes to new table with offsets of .ini's.

oh, here..;

Quote:

004411A9 |> 8B04BD C08B5F0>MOV EAX,DWORD PTR DS:[EDI*4+5F8BC0]

..is without changes cuz I have tried just add .ini of mechanician A026.ini.. but it failed

Re: Problem with Armor

Post your game.exe I will have a look.

Re: Problem with Armor

game.exe with changes or not ? I have tried to add on KPT1977, MajestyPT,MagicPT and QF1871
-
check your pms , contains all informations, i dont remember about link rules here

Re: Problem with Armor

With and without.

Any without A026.ini is good, I can compare it to one I have (with A026.ini).

___OK I got it.

But it's missing some game.dll so can't run it.

I think I see few problems:

1)

Code:

.wzr:045875B8 dd offset aA025_ini ; "A025.ini" .wzr:045875BC dd offset aA123_ini ; "A123.ini" .wzr:045875C0 dd offset aA026_ini ; "a026.ini" .wzr:045875C4 dd offset aA001_ini ; "A001.ini" .wzr:045875C8 dd offset aA001_ini ; "A001.ini"

Code:

.data:0060E678 dd offset aA025_ini ; "A025.ini" .data:0060E67C dd offset aA026_ini ; "A026.ini" .data:0060E680 dd offset aA001_ini ; "A001.ini" .data:0060E684 dd offset aA001_ini ; "A001.ini" .data:0060E688 dd offset aA001_ini ; "A001.ini"

PT might use A001.ini 3 times as some "separation mark" so try to add your offsets this way:
offset to A025.ini
offset to A123.ini
offset to A026.ini
offset to A001.ini
offset to A001.ini
offset to A001.ini

2)
Code I mentioned before:

Code:

00441E5B |. 83C7 36 |ADD EDI,36 00441E5E |. 81FF B0010000 |CMP EDI,1B0

Code:

0044373B |. 83C7 42 |ADD EDI,42 0044373E |. 81FF 10020000 |CMP EDI,210

You added 2 armours so I guess it should be:

Code:

36 42 4E 1D0 210 250

But that's just speculation, if you have client that don't have A025.ini then we can check it :)

Re: Problem with Armor

till A123.ini is working I just tried to add A026 , I thought(is not more) that PT use just 2 A001.ini but not -_-" is 3 ...
---
how can I calculate that value ?

each armor is 40?

oh, I can see now;

Quote:

36 42 4E
1D0 210 250

this value was not 36 = 1B0 ?

0044108B |. 83C7 36 |ADD EDI,36
0044108E |. 81FF D0010000 |CMP EDI,1B0

36/1B0 = till A123 is working
I added A026.ini and put 1D0 , is wrong?

i'm confused now :huh:

check your pm again -_- ,

--
Quanma I'm sorry for use your topic but if I can fix it I'll teach you later

Re: Problem with Armor

Quote:

Originally Posted by TrAnCe ^^

Quanma I'm sorry for use your topic but if I can fix it I'll teach you later

Great, wish you success, I wait for news from you :)::):

Re: Problem with Armor

How to enable window mode on your client?
Maybe you have clean kPT client without A026.ini?

Re: Problem with Armor

okay, I have tried much times and the same problem happen ,
look, Vormav check your pms,I send the hotuk, with that you can enable window mode, and the "Clean Version" .exe that I sent to you is without A026.ini...

----
I tried to change a offset that is working for my new .ini and it have been loaded, so new offset added is not working ,is not loading.. still loading A011.ini -_-" 1 D0NT UND3R5T4ND :(

Re: Problem with Armor

About .ini... you send me only .exe and .dll >=P

__EDIT__
I don't see da126 in your client, how did you name it?

1 Attachment(s)

Re: Problem with Armor

Vormav, fragments? what it is?

okay , look at this

180102 = DA124 = Frenzy Armor ;A023.ini | Working 100%
190102 = DA305 = Mythril Armor ; A024.ini |Workin 100%
1A0102 = DA125 = Highlander Armor ; A025.ini |Working 100%
1B0102 = DA304 = Hades Armor ; A123.ini | Working 100%
1C0102 = DA127 = New armor that I want to add; | A011.ini (need be A026.ini)-_- is *not working ,

till 1B0102 is working perfectly

Game.exe KPT 1977 without Xtrap;

Attachment 94434

.

Re: Problem with Armor

Quote:

Originally Posted by TrAnCe ^^

1C0102 = DA127 = New armor that I want to add; | A011.ini (need be A026.ini)-_- is working ,

A026.ini is da126.
IMHO it should be A027.ini (also in exe).

Re: Problem with Armor

"DA126" show on inventory , what is the difference?;

item have drop normal-ly but on body is not working , just it .. and see it;

A123.ini = DA304 = Working :( ,

------
okay I tried change DA127 to DA126 and not work , just removed image armour in inventory -_-

Re: Problem with Armor

Thought there might be connection, but I think I see where problem might be:

CTRL + R your .ini table and find:

imul eax, 36h

tell me what value you get on EAX/ECX in:
mov edx, ds:off_4587550[ecx*4]

also try changing 36h to 42h

and tell me what value you get than.

Code:

.text:004411A9 mov eax, dword_5F8BC0[edi*4] .text:004411B0 imul eax, 36h .text:004411B3 add eax, esi .text:004411B5 mov ecx, ds:off_4587550[eax*4]

and

Code:

.text:004412D4 mov ecx, dword_5F8BC0[ebx*4] .text:004412DB imul ecx, 36h .text:004412DE add ecx, esi .text:004412E0 mov edx, ds:off_4587550[ecx*4]

Re: Problem with Armor

I tried change 36 to 42 and not work ,

look at this;

Quote:

004412C9 |. 03CE ADD ECX,ESI
004412CB |. 8B148D 00855F0>MOV EDX,DWORD PTR DS:[ECX*4+5F8500]
004412D2 |. EB 13 JMP SHORT GameMaje.004412E7
004412D4 |> 8B0C9D C08B5F0>MOV ECX,DWORD PTR DS:[EBX*4+5F8BC0]
004412DB | 6BC9 42 IMUL ECX,ECX,42 //36 Before
004412DE |. 03CE ADD ECX,ESI
004412E0 |. 8B148D 5075580>MOV EDX,DWORD PTR DS:[ECX*4+4587550]
004412E7 |> 8D4424 10 LEA EAX,DWORD PTR SS:[ESP+10]

Quote:

004411A0 |. 8B0C85 00855F0>MOV ECX,DWORD PTR DS:[EAX*4+5F8500]
004411A7 |. EB 13 JMP SHORT GameMaje.004411BC
004411A9 |> 8B04BD C08B5F0>MOV EAX,DWORD PTR DS:[EDI*4+5F8BC0]
004411B0 | 6BC0 42 IMUL EAX,EAX,42 //36 before
004411B3 |. 03C6 ADD EAX,ESI
004411B5 |. 8B0C85 5075580>MOV ECX,DWORD PTR DS:[EAX*4+4587550]
004411BC |> 8D5424 08 LEA EDX,DWORD PTR SS:[ESP+8]

maybe something wrong on transference of table?
do you think that I need do all again?
maybe I try again add on game 1977 ..yeah?

Re: Problem with Armor

I just added new armour, try changing your items ID it look like .ini selection is based on it.

1C0102 = DA127

Try 2A0102? Or just different and check if anything changed on your client.

Re: Problem with Armor

Hey, i think that can be here;

Quote:

KPT Table;
005FC03C 005CBD40
005FC04C 005CBD40 005CBD34 005CBD28 005CBD1C
005FC05C 005CBD10 005CBD04 005CBCF8 005CBCEC
005FC06C 005CBCE0 005CBCD4 005CBCC8 005CBCBC
005FC07C 005CBCB0 005CBCA4 005CBC98 005CBC8C
005FC08C 005CBC80 005CBC74 005CBC68 005CBC5C
005FC09C 005CBC50 005CBD40 005CBC44 005CBC38
005FC0AC 005CBC2C 005CBD40 005CBD40 005CBD40
005FC0BC 005CBD40

---------------------------

wow, I have some changes, now changed to 2A0102
and loaded A024.ini, but with "disconnect", so i'm confused now because I dont remember which changes I did on game.exe.

I will do this process again but with some difference... but why its loading A024 and not A026 ...?

====

cuz if PT was restarting the count of .ini, why it starting from A011.ini and not A001.ini ?

---------

Note 2;

yeah it restarting the count of .inis, Vormav you saved my life... =) later I post result and if you want Quan, I help you with it

-------

Now, restartin the process...

Re: Problem with Armor

So, its working now?

I usually don't have problems like that because I stick with YD standards =P