343's complete package IP configuration

Hi guys.

I'm using 343's Complete Package and Ubuntu Server 10.04.3 32bit. I've installed it using VMware Player on Windows 7. I'm at the point where I have to configure the IP's in the three server files.

I got my WAN IP from this site (What Is My IP Address? Lookup IP, Hide IP, Change IP, Trace IP and more...)

and

My LAN IP from RUN> CMD> ipconfig and then looked at Ethernet adapter Local Area Connection:

IPv4 Address............: xxx.xxx.x.xxx

Now is this the right way to look for your WAN and LAN IP address? (I've used the LAN and WAN IP found in Windows 7) And if so, what parts do I change in the server files?

Please look at the picture for more info.

http://forum.ragezone.com/attachment...e-untitled.jpg

Help would be greatly appreciated.

lol, why did you censor your local ip? XDD

343's package is meant for retards to be able to install it. If it's really that hard, watch his video guide.

All is right but the second picture, make it your local IP...

Quote:

---

Originally Posted by Ozuru

lol, why did you censor your local ip? XDD

343's package is meant for retards to be able to install it. If it's really that hard, watch his video guide. All is right but the second picture, make it your local IP...

---

I've watched his video but thanks I'll try that.

Edit: That didn't work. If I use my LANIP/admin I get "Problem Loading Page" and if I use my WANIP/admin I get "The connection has timed out"

Here's a picture of what my hosts file looks like right now.

Quote:

---

Originally Posted by Ozuru

lol, why did you censor your local ip? XDD

343's package is meant for retards to be able to install it. If it's really that hard, watch his video guide.

All is right but the second picture, make it your local IP...

---

Ozuru why the hell you're always that rude with everyone, relax mate!
:thumbup:

Quote:

---

Originally Posted by brunno951

Ozuru why the hell you're always that rude with everyone, relax mate!
:thumbup:

---

Stupid questions deserve stupid answers =)

Wan IP is your public IP that you can find from sites that find you IP.

The Lan IP is whatever you put for the IP of your server when you were setting up Ubunutu. The Lan IP must be on the same Network as your other PCs if using bridged and must NOT be the same IP as any other device on the network.

Quote:

---

Originally Posted by Ozuru

Stupid questions deserve stupid answers =)

---

So my question was stupid? And if so, then I'm sure you could enlighten me why it still doesn't work, I've added a picture and more info to the other post above brunno's post.

Quote:

---

Originally Posted by Ozuru

lol, why did you censor your local ip? XDD

343's package is meant for retards to be able to install it. If it's really that hard, watch his video guide.

All is right but the second picture, make it your local IP...

---

eye for an eye and the world goes blind mate, there are noobs, couch potatoes, etc everywhere but lets at least try to be nice to everyone!:D:

Quote:

---

Originally Posted by Kodu

So my question was stupid? And if so, then I'm sure you could enlighten me why it still doesn't work, I've added a picture and more info to the other post above brunno's post.

---

Perfectworld ip = WAN ip

all other should be 127.0.0.1 the LAN ip for the server on your config file should be the lan ip of the pc, found with ifconfig on linux

this is a 1.4.4 hosts file, but the same applies. my server is host-only however:

Code:

---


#
# hosts                This file describes a number of hostname-to-address
#                mappings for the TCP/IP subsystem.  It is mostly
#                used at boot time, when no name servers are running.
#                On small systems, this file can be used instead of a
#                "named" name server.  Just add the names, addresses
#                and any aliases to this file...
#
# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
# should NEVER be named with the name of the machine.  It causes problems
# for some (stupid) programs, irc and reputedly talk. :^)
#

# For loopbacking.

127.0.0.1 localhost
192.168.96.131 perfectworld

192.168.96.131 aumanager
192.168.96.131 manager
192.168.96.131 link1
192.168.96.131 game1
192.168.96.131 game2
192.168.96.131 game3
192.168.96.131 delivery
192.168.96.131 database
192.168.96.131 backup
192.168.96.131 auth
192.168.96.131 gmserver

# End of hosts.

---

you could also have it like this:

Code:

---

#
# hosts                This file describes a number of hostname-to-address
#                mappings for the TCP/IP subsystem.  It is mostly
#                used at boot time, when no name servers are running.
#                On small systems, this file can be used instead of a
#                "named" name server.  Just add the names, addresses
#                and any aliases to this file...
#
# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
# should NEVER be named with the name of the machine.  It causes problems
# for some (stupid) programs, irc and reputedly talk. :^)
#

# For loopbacking.

127.0.0.1 localhost
192.168.96.131 perfectworld

127.0.0.1 aumanager
127.0.0.1 manager
127.0.0.1 link1
127.0.0.1 game1
127.0.0.1 game2
127.0.0.1 game3
127.0.0.1 delivery
127.0.0.1 database
127.0.0.1 backup
127.0.0.1 auth
127.0.0.1 gmserver

# End of hosts.

---

@Psytrac: Okay now I have it the same way you do (with my own IP of course) but it still doesn't work. I think I know why though, when I type in "./start.sh" to start the server, APACHE and MySQL won't start. I've made a screenshot for the error and yes I have installed xampp,lampp like in 343's tutorial video. (cd /root/notes
./setup.sh)

Quote:

---

Originally Posted by Kodu

So my question was stupid? And if so, then I'm sure you could enlighten me why it still doesn't work, I've added a picture and more info to the other post above brunno's post.

---

Yes, you didn't know what to put as your WAN or LAN ip...:rolleyes:

@kodu: "ls /opt/lampp/"

if those files do not exist (as it states in your screenie) chances are you also forgot to run setup.sh

@Psytrac: It lists the following: bin cgi-bin htdocs lib licenses logs security tmp.

@343: No, I did run setup.sh with "cd /root/notes" and then "./setup.sh". It installed a bunch of files and then I had to reboot, just like in your video. So I don't know why it didn't work, I've followed your video word by word.

lampp is not there? resetup your server

Okay I'f re-setup my whole server and it works now. You can't click "I Finished Installing" in VMware when it pops up, it will screw up your server or at least it did for me.

Now I'm at the point where I have to edit my serverlist.txt, whenever I change the standart ip to mine the server won't show up inside Perfect World.

It works when the IP is in this format 29000:10.0.0.51

But it doesn't work when the IP is in this format xxx.xxx.x.xxx

So I guess I have to convert my IP address to that new format?

Code:

---

Port      IP
29000:10.0.0.51

---

All IP addresses are in the format xxx.xxx.xxx.xxx There is no other format. Its just that you dont put 0 in from when its something else less than 3 digits. xxx is any number from 0-255 on all four parts.

Basically replace 10.0.0.51 with your IP. You do not need to convert it.

Also you might want to take a look here.
http://forum.ragezone.com/f695/absol...tcp-ip-709746/

How about a straight static ip no local ip... Setting it up with port forwarding is ok, works, but would rather shove it off to its own IP so I can send a subdomain to it.


Changing all LANIP to 127.0.0.1 and WAN to staticIP works fine.

if your using VMware you want to change your network type to Bridge instead of NAT and that should solve everything, as for starting programs ( them not running ) re follow the guides 100%. only change you will make is when running cp -R * / you want to type it as chmod u+rwx cp -R * / to give write / root access to all files since the VMWare does not run as an ex4 partition. thats all there is to it ^^