Problem with no-ip connection
Welcome. I have two hosts in no-ip (xxx.zapto.org and xxx.no-ip.org) and when I change the server and main, turning on the client, the animation comes around and nothing happens. I tried with both hosts, ports are certainly unlocked because Navicat started work after unlocking at this address. In the old internal ip it server server works well. I put my new address to connectser folder and the data folder.Ports are unloked form 1 to 65000, i have tt 11.00.. files. Any solution?
Re: Problem with no-ip connection
dont use DNS with " - " symbols
make sure you edit your main.exe IP correctly
put DNS on connectserverlist and mapserverinfo.dat the rest 127.0.0.1
if youre using router.. edit your HOST (located at C:\WINDOWS\system32\drivers\etc folder) , open it with notepad
then put your SERVER LAN IP and your DNS
example
Code:
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.0.101 evo.zapto.org
if youre using another computer in network to connect to the server..edit the host of that pc also.. and do the same thing put server lan ip and dns.. :wink:
Re: Problem with no-ip connection
Should work if... 1. you don't have blocked ports or blocking firewall, 2. server files is configured correctly, 3. you did not made any mistakes when you created no-ip address.
Re: Problem with no-ip connection
Still the same. adding lines to etc> host did not work. I even turned off the firewall on the router and on computer.
Re: Problem with no-ip connection
Re: Problem with no-ip connection
Re: Problem with no-ip connection
try using a short DNS like lmu.zapto.org or cris.zapto.org
and you didnt edit your main.exe correctly
ive checked your server with a launcher and it shows its online.. you just need to edit your main.exe correclty
Re: Problem with no-ip connection
Can you check whether you can log in?
ClientExeVersion=1.04.04
ClientExeSerial=xaxaxaxaxaxaxaxa
@What have I done wrong in main?
Thanks for your help
Re: Problem with no-ip connection
i dont have client .. i just check it with a launcher which shows if servers online or not...ports 44405, 55901 and 55902 are all ok. but i see your mapserverinfo.dat shows your gscs is using 55919... double check what port your GSCS is using (check it on serverinfo.dat on data folder of your gscs)
and you can post here your main.exe and ill edit the IP for you
Re: Problem with no-ip connection
The rest of my main working properly (for 127.0.0.1,192.168.1.20. And my day ip), so I doubt that I broke something
I have main from this tread
http://forum.ragezone.com/f197/main-...racked-820090/
Re: Problem with no-ip connection
Re: Problem with no-ip connection
You are a miracle worker. It works!
Big big thanks. By the way, could you tell me how you did this: D
Re: Problem with no-ip connection
Re: Problem with no-ip connection
Such a small mistake and I wasted it all morning ^ ^ Thanks again, I'll remember for the future. Thread to close