Authentication error v17

Hello, i am gettin autehtication error and patry patch again when i try to log in, i am using v17 client with v17 features v18 files, everything is done correctly, model/world are same msgver, are same and i am gettin this error, ill copy just a piece of it. Hope that someone can help me with fix it, thx alot..i

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UpresiaGrass01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UpresiaGrass01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UplesiaBush01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UplesiaBush01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UplesiaBush01.o3d Ŕб⠽ÇĆĐ

2012/ 4/21 08:38:18 Model\obj_UplesiaBush01.o3d : ĂŁŔ» Ľö ľřŔ˝

2012/ 4/21 08:38:18 LoadObject : obj_UplesiaBush01.o3d Ŕб⠽ÇĆĐ

If you're using a precompiled neuz, I wouldn't recommend changing the msgver/port; change it back to what it was when u got it.

If you're using source, go to Neuz folder, open NeuzMsgProc.cpp and look for this:

Code:

---

        g_Neuz.m_uCachePort = atoi( "15600" ); // NEUZ CONFIG - CACHE PORT
        strcpy( g_szProtocolVersion, "34339935" ); // NEUZ CONFIG - VERSION

---

Make sure these are the same too. I've had the same problem, but changing these solved it.

I think there are couple of other msgver/ports/IPs underneath that, so check them too.

i dont have an source :( what shall i do ? still get the same problem..

You could follow through one of the guides on how to compile a source.
I've already said this in my previous post, but use msgver and port that was there when u got the files.
Open your Neuz.exe with reshacker and double check if the port and msgver is the same as your .ini files.

I can't see any other solution to this. I can't see any other reason why you're getting that error either. I'm not quite certain but it's also possible that you've got flyff.a flyff.b protection active; make sure that your resource files are the same client sided as server sided. Same goes for flyff.a and flyff.b (use merge.exe).

well i wil try another neuz.exe, cuz everything is same ! flyf.a flyff.b merged..resource files are same as client...i follow guide by
http://forum.ragezone.com/f724/video...-v17-w-823868/
follow his steps one by one.. :(

i did everything and i still gettin the error, running it on w7-64 bit... Guys please help me with solve !! :D COMON GUYZ :(

It could be a Database prob ?

Look at the ini files, somewhere there is a version stated. If you open neuz.exe you will also find a version number (at the same location as your ip) make sure these are the same.

they were, prob was in neuz.exe