Printable View
somebody can help me with this..i having trouble with port forwarding..i forward the port 80,44404,55919,55901 and i dont have idea wheres the error is..the port 80 already open when i check it on canyouseeme.org but the other ports are not..hope someone can help me out..more power RAGEZONERZ!...i post some pictures so you can get what i mean..thanks :D:
Attachment 104437Attachment 104438Attachment 104439Attachment 104440Attachment 104441
1st open port at ur lanip u put 192.168.2.100 , check if its correct start/cmd>ipconfig> the Ipv4 <
2nd open all ports in udp and tcp or both.
And no 44404 correct is 44405
i have the same problem btw,with other ruter
well open ports run ur server and at canyouseeme.org check if the are opened
whats your ISP?
make sure that your server is online to make PORT CHECK :D
yah i see it online now.but other computer still cant connect.i use wan ip at my server config and i forwarded my lan ip..what should i put on main?..lan and wan? i use PLDT DSL connection.
*what do you mean by other computer cant connect? are they connecting thru ONLINE connection or just LAN connection?Quote:
Originally Posted by hunter1989
*on your main.exe use your GLOBAL IP (make sure your global ip is STATIC)
and in server side just put your GLOBAL IP on serverlist (connectserver folder) and mapserverinfo.dat (data folder)
*try this....
go to C:\WINDOWS\system32\drivers\etc
then open HOST with notepad
put SERVER LAN IP then your GLOBAL IP
example:
server lan IP : 192.168.0.101
global IP : 111.111.111.111
if you got other pc on your network that you want to connect to your server pc, edit their HOST too.Code:
# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.0.101 111.111.111.111
if ip is not STATIC,where is the problem ?we can connect both but when my ip will change i must make Just a new main to share and change to map server,serverlist or No?
Karli what if i use no-ip because my wan ip keep changing i think i got dynamic ip..what should i do i already forwarded the ports and its already open..what are the configuration when i use no-ip..should i use no-ip rather than wan-ip on (connectserver folder) and mapserverinfo.dat (data folder)?
example my lan ip is 192.168.0.100 and i use also no-ip example muonline.zapto.org how should i configurate this?..i dont think so that i can use my wan ip because its always changing because i got dynamic ip..
put ur noip in mapserverinfo.dat , serverlist.dat, commonloc.dat , iplist.dat , and at last line in startup.cfg and main.exe and done.
run the server 1st before u check in canyouseeme.org
I Already fixed this problem..thanks guyz.
windows firewall :)Quote:
Originally Posted by hunter1989
my Thomson TG585 V8 imppasble for port forward ;)
