After Login Nothing happens?

Greetings, I'm a bit desperate here after searching and messing with settings etc.

Basically My server files seem fine, and I've edited the jewel/main ip, serial to the best of my knowledge. However after login, nothing happens no character screen appears...

It is my first attempt to setup season 6 ep 3 so sorry for that, hehe. In fact I am pretty inexperienced with it all. Had season 2 and season 6 ep 1 running a lil while.

I use MuEngine files from here (http://forum.ragezone.com/f197/mueng...3-free-887358/) and the 1.04D Client, linked in the same thread.

Here are the screenshots of server windows, and the problem. I thank you, sincerely in advance. Happy new Year! =)

http://imageshack.us/scaled/thumb/571/487o.jpg
http://imageshack.us/scaled/thumb/607/pjao.jpg
http://imageshack.us/scaled/thumb/843/20w6.jpg
http://imageshack.us/scaled/thumb/36/h26z.JPG
http://imageshack.us/scaled/thumb/827/ly6k.jpg
http://imageshack.us/scaled/thumb/30/wi0g.JPG
http://imageshack.us/scaled/thumb/854/c0t3.jpg
http://imageshack.us/scaled/thumb/5/3vg8.jpg
http://imageshack.us/scaled/thumb/801/g6cx.jpg
http://imageshack.us/scaled/thumb/41/m14h.jpg
http://imageshack.us/scaled/thumb/833/1ix4.jpg
http://imageshack.us/scaled/thumb/836/ry5s.jpg

check port if all are opened
http://www.canyouseeme.org/

Hmm, here is an example of what happens to the port check, I am connected to my ISP directly with the cable to the network adapter. Therefore, I don't have much access beyond that etc.

http://img543.imageshack.us/img543/2064/rfri.jpg



Well I don't think it could be ports anyway? Cause this week I tested season 6 and season 2 servers which ran perfectly on the first try.. I only seem to have problems with Titantech or MuEngine files.

Thanks a lot for trying to help me though!

:thumbup1:
any way goodluck

@SergiusLT
you must run server first , then check if ports are running , how could the ports be used if udont run server? run server , check ports. if all ok then .

just be sure u opened 55901 or whatever port u use and enabled it from firewall , maybe something changed with ports on your files , recheck that mapserverinfo and connect - server list.dat