Really need your help. Can not configure Virtual box hook up to other players.

I had a problem. Server set, and everything works except:
1. Also my server is not who can not go.
2. Server not visible on the Internet.
3. Not one player can not ping my server.

Prompt how to set things up?
The same topics on the forum redefined fulfilled all that was written there, nothing helped. = (
I really hope for your assistance conditional.

- - - Updated - - -

my computer:

Code:

---

IP Configuration for Windows

        Computer name. . . . . . . . . : lanos
        Main DNS- suffix . . . . . . :
        Node type . . . . . . . . . . . . . : unknown
        IP- routing is enabled . . . . : no
        WINS- enabled proxy . . . . . . . : no

LAN connection - Ethernet adapter :

        DNS- suffix for this connection . . :
        Description . . . . . . . . . . . . : Atheros AR8161/8165 PCI-E Gigabit Ethernet Controller
        The physical address . . . . . . . . . 90 -2B- 34 -58 -ED-6B
        Dhcp enabled . . . . . . . . . . . : no
        IP- address . . . . . . . . . . . . : 10.76.80.34
        Subnet mask . . . . . . . . . . : 255.255.252.0
        Default Gateway . . . . . . . . . . : 10.76.80.1
        DNS- servers . . . . . . . . . . . : 192.168.48.21
                                                    192.168.51.21

VirtualBox Host-Only Network # 2 - Ethernet adapter :

        DNS- suffix for this connection . . :
        Description . . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter # 2
        The physical address . . . . . . . . . 08- 00 -27 -00 -1C-9A
        Dhcp enabled . . . . . . . . . . . : no
        IP- address . . . . . . . . . . . . : 192.168.62.1
        Subnet mask . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . . :

VirtualBox Host-Only Network - Ethernet adapter :

        DNS- suffix for this connection . . :
        Description . . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
        The physical address . . . . . . . . . 08- 00 -27 -00 -D8-EE
        Dhcp enabled . . . . . . . . . . . : no
        IP- address . . . . . . . . . . . . : 192.168.56.1
        Subnet mask . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . . :

---

virtual box:
There are 2 network:
1. NAT
2. Virtual host adapter

Adapter
ip: 192.168.62.1
Mask: 255.255.255.0
DHCP
Address: 192.168.62.100
Netmask:255.255.255.0
Lower limit:192.168.62.101
Upper limit:192.168.62.254

Code:

---

eth0      Link encap:Ethernet  HWaddr 08:00:27:35:5A:CD
          inet addr:10.0.2.15  Bcast:10.0.2.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fe35:5acd/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:191 errors:0 dropped:0 overruns:0 frame:0
          TX packets:188 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:79906 (78.0 KiB)  TX bytes:21920 (21.4 KiB)

eth1      Link encap:Ethernet  HWaddr 08:00:27:E5:15:4F
          inet addr:192.168.62.101  Bcast:192.168.62.255  Mask:255.255.255.0
          inet6 addr: fe80::a00:27ff:fee5:154f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:126 errors:0 dropped:0 overruns:0 frame:0
          TX packets:148 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:13832 (13.5 KiB)  TX bytes:25244 (24.6 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2553 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2553 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:5012653 (4.7 MiB)  TX bytes:5012653 (4.7 MiB)

---

Can anyone help with this problem?

can anyone help please? or not?

Judging from your IP address you don't have access to the internet router to open up ports in the NAT. How are you connecting to internet: mobile modem, wired modem, router?

Quote:

---

Originally Posted by cypher

Judging from your IP address you don't have access to the internet router to open up ports in the NAT. How are you connecting to internet: mobile modem, wired modem, router?

---

hello friends I have the same problem also want others to connect to my server
and I have full internet with usb wireless network adapter

and wanted to know if I could put my atydar to as fully served in nat mode
if and apology may remark here another topic.

thanks :)

Quote:

---

Originally Posted by cypher

Judging from your IP address you don't have access to the internet router to open up ports in the NAT. How are you connecting to internet: mobile modem, wired modem, router?

---

I have a cable connection goes. I tune ip as my ISP and I go to the internet. I think the connection is via a router, but to him I have access no.

Both of you cannot host a public server using your internet connection because you don't have public IP addresses and you can't open ports in your NAT. Your solutions are:

1. Change your internet connection.
2. Ask for a public IP address to be assigned to your account.
3. VPN

Quote:

---

Originally Posted by cypher

Both of you cannot host a public server using your internet connection because you don't have public IP addresses and you can't open ports in your NAT. Your solutions are:

1. Change your internet connection.
2. Ask for a public IP address to be assigned to your account.
3. VPN

---

ahhhh ok and how I can put my full nat server mode to play on a local network without using internet

if I could help with that thanks :)

Quote:

---

Originally Posted by cypher

Both of you cannot host a public server using your internet connection because you don't have public IP addresses and you can't open ports in your NAT. Your solutions are:

1. Change your internet connection.
2. Ask for a public IP address to be assigned to your account.
3. VPN

---

Understanding, I ask dedicated ip address from your ISP.
Can even tell how to open files ENS?

Quote:

---

Originally Posted by andri21

ahhhh ok and how I can put my full nat server mode to play on a local network without using internet

if I could help with that thanks :)

---

Set the vm's network adapter to hostonly network. Then share your wan connection with the hostonly network adapter so that you will have internet inside the vm. After that you can change your IP subnet for the hostonly network adapter to something that you like (subnet is: 192.168.xxx.1) then set vm's ip address to 192.168.subnet.2 or what ip you want, netmask should be /24 (255.255.255.0), network: 192.168.xxx.0, broadcast: 192.168.xxx.255, gateway: 192.168.xxx.1, dns1: 8.8.8.8 (google resolver 1), dns2: 208.67.222.222 (opendns resolver 1).

Quote:

---

Originally Posted by antohhh93

Understanding, I ask dedicated ip address from your ISP.
Can even tell how to open files ENS?

---

Never heard of .ens files.

Quote:

---

Originally Posted by cypher

Never heard of .ens files.

---

I beg your pardon, I sealed. File Type ENC http://content.screencast.com/users/...01-11_1716.png

http://forum.ragezone.com/f451/enc-f...2/#post7271132

Quote:

---

Originally Posted by cypher

http://forum.ragezone.com/f451/enc-f...2/#post7271132

---

Thank you very much.

If you will not be difficult, you can tell how to change the language in the game client? For example, on Russian?
Easley use another game client - it does not help = (

Read this:

http://forum.ragezone.com/f729/cabal...llydbg-781438/

Then this:

http://forum.ragezone.com/f451/cabal...9/#post7838369

Quote:

---

Originally Posted by cypher

Set the vm's network adapter to hostonly network. Then share your wan connection with the hostonly network adapter so that you will have internet inside the vm. After that you can change your IP subnet for the hostonly network adapter to something that you like (subnet is: 192.168.xxx.1) then set vm's ip address to 192.168.subnet.2 or what ip you want, netmask should be /24 (255.255.255.0), network: 192.168.xxx.0, broadcast: 192.168.xxx.255, gateway: 192.168.xxx.1, dns1: 8.8.8.8 (google resolver 1), dns2: 208.67.222.222 (opendns resolver 1).

---

I do not understand there would be a little more or less a guide how to do it or to guide me

because my intention is to create a server but to serve pure nat so that another player is connected through a local network

I hope your answer...

Well for that you need another network adapter and a crossover rj-45 network cable to be able to network two devices without the need of a switch or router. After that you just share your WAN network adapter with the LAN adapter to provide internet to the local network. The instructions above will still be valid for this case too as long as you assign a unique IP address to the third device and you correctly place it in the same subnet as the other two.

If none of this makes sense you should study basic networking then try to make a game server.

Quote:

---

Originally Posted by cypher

Well for that you need another network adapter and a crossover rj-45 network cable to be able to network two devices without the need of a switch or router. After that you just share your WAN network adapter with the LAN adapter to provide internet to the local network. The instructions above will still be valid for this case too as long as you assign a unique IP address to the third device and you correctly place it in the same subnet as the other two.

If none of this makes sense you should study basic networking then try to make a game server.

---

mmmmm ok I get it thanks will try aver that such

Quote:

---

Originally Posted by cypher

Read this:
http://forum.ragezone.com/f729/cabal...llydbg-781438/
Then this:
http://forum.ragezone.com/f451/cabal...9/#post7838369

---

I knew about how to change the language. But for this you edit cabalmain, may suggest how it can be unpacked and then back to collect? After all, he exe expansion.
Or maybe something I do not understand correctly? can once again supporting please.

Open it with a debugger like OllyDbg


Sent from my iPad using Tapatalk

Quote:

---

Originally Posted by cypher

Open it with a debugger like OllyDbg

---

Thank you =)
There was one problem, when I try to go to the GM character, he can not enter the game, if I change to no nation or other, it comes.

And the following problem: how to register Forskalibur run events, and the Golem in the pathway? not using the GM team.
Where in the database is executed or which files I can find them?

Quote:

---

Originally Posted by cypher

]

---

Help please, after you reinstall the computer and install again the server encountered the following error. Help to fix them.