[Tut]Prepatch using Global's FTPS

Credits to haha01haha from HiddenStreet.

What's a prepatcher?
A prepatchers is a patch create by yourself, using the ftps .patch file. However, not all prepatchers pass...

What You Need:
a.xvi32, a freeware hex editor, can be downloaded from here:
b.computer
c.brain

IMPORTANT: To do a pre patcher nexon must be going under a patch. Also, hex and pictures belows are for prepatchers using v52-v53. Hexes for v59 might be different from what it's shown on the picture. I (and haha01haha) is not responsible if your client goes haywire, so use at your own risk.

Steps:
1.Go to Nexon's site and download the latest manual patcher (if u made a pre-patcher before, you can use your old one instead of downloading it from Nexon)
2.Now, go to , click on the directory for the next patch (E.G. were now in patch 0.59, Nexon are currently adding patch 0.59, so go to 00059)
3.If it doesn't appear try refreshing, if it still doesn't appear Nexon didn't add it yet, wait some time and try again.
4.After u clicked the directory, click to download the file you need (if you are making a pre-patcher for v0.59, you will need the one called 00058to00059.patch)
5.Go to and download the patch notice you need (Currently, v59's notice isn't there...)
6. Make sure that your files are in a folder.
7. After u downloaded all of the files, run xvi32, click file --> open and choose the manual patcher you got from step 1.
8.Click Ctrl + F, set the search settings like the picture below:

and search for WzPatch.
9.The software found WzPatch, but we need the next one, so press F3 to go to next one.
10.The blue mark should be standing on the W of WzPatch now.
11.Click edit --> delete from cursor
12.Click file --> insert... and choose the .patch file
13.Click file --> insert... and choose the .txt notice file
14.Press right click on the .patch file --> properties --> write down the size (in bytes, without the commas, and size not size on disk)
15.Click tools --> encode number --> in the number box put the size you wrote down before, and choose the following settings:

16.Click ok, a hexadecimal number should pop up in the box under "here:"
17.Copy it, including the spaces.
18.Click edit --> insert string --> use the settings in the picture below:

under "hex string" paste the number you copied.
19.Do steps 14-18 again but this time use the .txt notice file
20.Click edit --> insert string --> but this time paste this string under "hex string": F3 FB F7 F2
21.The blue mark should be on the "00" and on the square sign like in the picture below. if its not, the last hex number in your file is F2 (the end of the string F3 FB F7 F2 that we pasted before) you may skip the next stage.
22.Now, you should see a 00 at the hex. Press "Delete". the 00 and the square will be gone immediately.
23.Click file --> save as... and choose a name and directory for you pre-patcher. remember to add .exe in the end of the file's name.