- Joined
- Oct 29, 2008
- Messages
- 40
- Reaction score
- 0
good night. I use a broadband modem router. is to use no-ip. " how do I set up to put online? I tried to get all the ips 127.0.0.1 to my ip address, but cause error.
127.0.0.1 for my ip diegojso.no-ip.info cause error why?
- Thread starter diegojso
- Start date
- Joined
- Jun 29, 2008
- Messages
- 5,021
- Reaction score
- 999
Don't edit all IP addresses as this will cause problems. Leave every ini file as it is and just change the IPAddress= and AddrForClient= in the worldsvr ini file to the external IP address.
Upvote
0
- Joined
- Oct 29, 2008
- Messages
- 40
- Reaction score
- 0
I swapped the ip of worldsvr but still not connecting. could you give me an example of how you have to get the ips? .. Thanks friend
this my loginsvr
[NetLib]
Port=38101
SendMaxBufSize=65536
SendMaxBufSizeUserHandler=131072
SendMaxBufSizeLinkHandler=1048576
ProcessDataLimit=10240
MaxUserNum=100
WatchsNoPackLimit=10000
SystemLogTTimeOut=100
ReactorTimeOut=-1
ConnectRetryTime=5000
ConnectRetryNum=10
LogLevel=3
[LoginSvr]
GroupIdx=1
Timer=1:10000,2:5000,3:5000
NoActiveLimitTime=120000
TestChannelGroupIdxStartPoint=50
UseAntiOnlineGameAddictionSystem=1
InstantPlayTimeClearIntervalMin=300
IDC=1
AffiliatedCorpIP=189.26.152.116;189.26.152.116;189.26.152.116;
AdminIP=189.26.152.116
# Client version to accept (22|1262)
# - Only if IgnoreClientVersion is 0
client_version=22
# Allows any client version if 0 (0|1)
# Use with MagicKey and NonClientCheck
IgnoreClientVersion=1
NormalClientMagicKey=1168110
###################################
#### ImageAuth Captcha ####
###################################
UseImageAuth=0
ImageAuthDataPath=./ImageAuth/
ImageAuthMaxTryCount=5
ImageAuthWaitTime=120000
BlockIfImageAuthFail=0
AdultAge=18
DefaultAdultAge=1
ServerListManualOrder=0
ServerListManualOrder=27,24,25,28
[GlobalMgrSvr]
Addr=10.1.1.10
Port=38170
[GlobalDBAgent]
Addr=10.1.1.10
Port=38180
[PSS]
UsePSS=0
CachedPSS=0
PssCacheDurationMin=1440
WebSvcRelativePath=/PSS/PSI.EXE
Addr=189.26.152.116
Port=80
this my loginsvr
[NetLib]
Port=38101
SendMaxBufSize=65536
SendMaxBufSizeUserHandler=131072
SendMaxBufSizeLinkHandler=1048576
ProcessDataLimit=10240
MaxUserNum=100
WatchsNoPackLimit=10000
SystemLogTTimeOut=100
ReactorTimeOut=-1
ConnectRetryTime=5000
ConnectRetryNum=10
LogLevel=3
[LoginSvr]
GroupIdx=1
Timer=1:10000,2:5000,3:5000
NoActiveLimitTime=120000
TestChannelGroupIdxStartPoint=50
UseAntiOnlineGameAddictionSystem=1
InstantPlayTimeClearIntervalMin=300
IDC=1
AffiliatedCorpIP=189.26.152.116;189.26.152.116;189.26.152.116;
AdminIP=189.26.152.116
# Client version to accept (22|1262)
# - Only if IgnoreClientVersion is 0
client_version=22
# Allows any client version if 0 (0|1)
# Use with MagicKey and NonClientCheck
IgnoreClientVersion=1
NormalClientMagicKey=1168110
###################################
#### ImageAuth Captcha ####
###################################
UseImageAuth=0
ImageAuthDataPath=./ImageAuth/
ImageAuthMaxTryCount=5
ImageAuthWaitTime=120000
BlockIfImageAuthFail=0
AdultAge=18
DefaultAdultAge=1
ServerListManualOrder=0
ServerListManualOrder=27,24,25,28
[GlobalMgrSvr]
Addr=10.1.1.10
Port=38170
[GlobalDBAgent]
Addr=10.1.1.10
Port=38180
[PSS]
UsePSS=0
CachedPSS=0
PssCacheDurationMin=1440
WebSvcRelativePath=/PSS/PSI.EXE
Addr=189.26.152.116
Port=80
Upvote
0
- Joined
- Jun 29, 2008
- Messages
- 5,021
- Reaction score
- 999
The examples are in my files. Every IP should be 127.0.0.1 other than in odbc.ini (which should have the windows IP) and the 2 values in worldsvr i mentioned before.
Still, why are you editing by hand? This is exactly the wrong thing to do when you use my files, i wrote the cabal_config.sh script specifically because 99% of people don't understand this sort of stuff well enough to configure by hand. Run /home/cabal/cabal_config.sh and answer the questions it asks, the script will then create a set of config inis for you and as long as you gave it the right IP addresses and sql login details it will work.
Still, why are you editing by hand? This is exactly the wrong thing to do when you use my files, i wrote the cabal_config.sh script specifically because 99% of people don't understand this sort of stuff well enough to configure by hand. Run /home/cabal/cabal_config.sh and answer the questions it asks, the script will then create a set of config inis for you and as long as you gave it the right IP addresses and sql login details it will work.
Upvote
0
- Joined
- Oct 29, 2008
- Messages
- 40
- Reaction score
- 0
I did as you mentioned, but still not connect. my modem router is do not have anything there. " set up by your cabal_config.sh put my ip and even then just plug in a network. ja liberei all doors of the modem too and still nothing.
your loginsvr
[NetLib]
Port=38101
SendMaxBufSize=65536
SendMaxBufSizeUserHandler=131072
SendMaxBufSizeLinkHandler=1048576
ProcessDataLimit=10240
MaxUserNum=100
WatchsNoPackLimit=10000
SystemLogTTimeOut=100
ReactorTimeOut=-1
ConnectRetryTime=5000
ConnectRetryNum=10
LogLevel=3
[LoginSvr]
GroupIdx=1
Timer=1:10000,2:5000,3:5000
NoActiveLimitTime=120000
TestChannelGroupIdxStartPoint=50
UseAntiOnlineGameAddictionSystem=1
InstantPlayTimeClearIntervalMin=300
IDC=1
#AffiliatedCorpIP=121.170.135.105;222.122.130.2;222.66.83.12;
#AdminIP=127.0.0.1
# Client version to accept (22|1262)
# - Only if IgnoreClientVersion is 0
client_version=22
# Allows any client version if 0 (0|1)
# Use with MagicKey and NonClientCheck
IgnoreClientVersion=1
NormalClientMagicKey=1168110
###################################
#### ImageAuth Captcha ####
###################################
UseImageAuth=0
ImageAuthDataPath=./ImageAuth/
ImageAuthMaxTryCount=5
ImageAuthWaitTime=120000
BlockIfImageAuthFail=0
AdultAge=18
DefaultAdultAge=1
ServerListManualOrder=0
ServerListManualOrder=27,24,25,28
[GlobalMgrSvr]
Addr=127.0.0.1
Port=38170
[GlobalDBAgent]
Addr=127.0.0.1
Port=38180
[PSS]
UsePSS=0
CachedPSS=0
PssCacheDurationMin=1440
WebSvcRelativePath=/PSS/PSI.EXE
Addr=127.0.0.1
Port=80
ips correct? but not connect..
your loginsvr
[NetLib]
Port=38101
SendMaxBufSize=65536
SendMaxBufSizeUserHandler=131072
SendMaxBufSizeLinkHandler=1048576
ProcessDataLimit=10240
MaxUserNum=100
WatchsNoPackLimit=10000
SystemLogTTimeOut=100
ReactorTimeOut=-1
ConnectRetryTime=5000
ConnectRetryNum=10
LogLevel=3
[LoginSvr]
GroupIdx=1
Timer=1:10000,2:5000,3:5000
NoActiveLimitTime=120000
TestChannelGroupIdxStartPoint=50
UseAntiOnlineGameAddictionSystem=1
InstantPlayTimeClearIntervalMin=300
IDC=1
#AffiliatedCorpIP=121.170.135.105;222.122.130.2;222.66.83.12;
#AdminIP=127.0.0.1
# Client version to accept (22|1262)
# - Only if IgnoreClientVersion is 0
client_version=22
# Allows any client version if 0 (0|1)
# Use with MagicKey and NonClientCheck
IgnoreClientVersion=1
NormalClientMagicKey=1168110
###################################
#### ImageAuth Captcha ####
###################################
UseImageAuth=0
ImageAuthDataPath=./ImageAuth/
ImageAuthMaxTryCount=5
ImageAuthWaitTime=120000
BlockIfImageAuthFail=0
AdultAge=18
DefaultAdultAge=1
ServerListManualOrder=0
ServerListManualOrder=27,24,25,28
[GlobalMgrSvr]
Addr=127.0.0.1
Port=38170
[GlobalDBAgent]
Addr=127.0.0.1
Port=38180
[PSS]
UsePSS=0
CachedPSS=0
PssCacheDurationMin=1440
WebSvcRelativePath=/PSS/PSI.EXE
Addr=127.0.0.1
Port=80
ips correct? but not connect..
Last edited:
Upvote
0
- Joined
- Jun 29, 2008
- Messages
- 5,021
- Reaction score
- 999
The login server ini isn't going to do me any good, really i need to see the logfiles at a point where you tried logging on as the logfiles will tell you exactly what is happening. It could even be mssql conection problems and if it is changing p addresses isn't going to help.
Upvote
0
- Joined
- Oct 29, 2008
- Messages
- 40
- Reaction score
- 0
this is my logs
when I try to get in LAN, I can come up after the selection of channel but freeze, with the ip of the Internet i go at loginsvr enter. It would not be a problem for the loginsvr ip?
thanks =)
when I try to get in LAN, I can come up after the selection of channel but freeze, with the ip of the Internet i go at loginsvr enter. It would not be a problem for the loginsvr ip?
thanks =)
Upvote
0
- Joined
- Jun 29, 2008
- Messages
- 5,021
- Reaction score
- 999
Well the IP you should be using in the client internal.txt is 189.26.145.47 looking at the logs but as it is an external IP and not a LAN one there is a good chance it won't work unless your router supports loopback (which many don't). Try running cabal_config.sh again and using the lan ip as the ip players will connect to and the lan ip in internal.txt. If that works but using the wan ip doesn't then your router doesn't support loopback and hamachi is your only solution.
Upvote
0
- Joined
- Oct 29, 2008
- Messages
- 40
- Reaction score
- 0
I use the modem dlink 500b, do not have anything to do the same server running without the hamachi with this modem?
Upvote
0
- Joined
- Jun 29, 2008
- Messages
- 5,021
- Reaction score
- 999
I don't know anything about that modem and in most cases even the manual wouldn't tell me if it supported loopback or not. The simplest way to find out is to try it using lan addresses so you know your config is right and then test using the wan address, if it fails then you know you don't have loopback and you will have to use hamachi.
Upvote
0
- Joined
- Oct 29, 2008
- Messages
- 40
- Reaction score
- 0
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:993439 errors:0 dropped:0 overruns:0 frame:0
TX packets:993439 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1192857595 (1.1 GiB) TX bytes:1192857595 (1.1 GiB)
my modem supports loopback .. What's wrong then = /
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:993439 errors:0 dropped:0 overruns:0 frame:0
TX packets:993439 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1192857595 (1.1 GiB) TX bytes:1192857595 (1.1 GiB)
my modem supports loopback .. What's wrong then = /
Upvote
0
RaGEZONE Sponsor
RaGEZONE Partners
