Hi i run my serwer and i create account all its ok but wheni run game login to my server and wanna make new character i chose wizard chose female and write name of my char and click make nothing happend, i chose worior and taos male and female and this same situation. Maybe you can help me with this problem.thanks for help
can't create character Mir3
- Thread starter Bubel
- Start date
- Joined
- Nov 19, 2003
- Messages
- 4,435
- Reaction score
- 78
you didnt set up your ODBC correctly. make sure it is pointing to mir3db as the default database.
- Joined
- Jun 27, 2003
- Messages
- 622
- Reaction score
- 0
There is more than one place that reference the database, if one of the programs has the wrong server name, the wrong IP etc - then bugger me, it wont work 
What I suggest is thus, check your DBSRV Setup (config) make sure that reads the right Server name (so it matches everything else) and has the right info throughout the config...
In fact - i would start again, go through each program in turn, check every single file (INI) and setting with each program, use the guide on here, the one i wrote whatever.. One ini file with the wrong info and the server will half work - could also be for exmaple MSSQL Demo (if thats what your using) has expired maybe?
You will no doubt swear blnd its all set up fine but then later on you will notice a file is wrong and you will kick yourself - use the server starter as this sets all the info for you anyhow and check setup.ini (.txt whatever you use) in /mir300 folder and make sure also that the sa password is correct there...
Are you running through a router maybe and it cannot talk to char server?
What I suggest is thus, check your DBSRV Setup (config) make sure that reads the right Server name (so it matches everything else) and has the right info throughout the config...
In fact - i would start again, go through each program in turn, check every single file (INI) and setting with each program, use the guide on here, the one i wrote whatever.. One ini file with the wrong info and the server will half work - could also be for exmaple MSSQL Demo (if thats what your using) has expired maybe?
You will no doubt swear blnd its all set up fine but then later on you will notice a file is wrong and you will kick yourself - use the server starter as this sets all the info for you anyhow and check setup.ini (.txt whatever you use) in /mir300 folder and make sure also that the sa password is correct there...
Are you running through a router maybe and it cannot talk to char server?
Last edited:
ok now i go to work and must find what is not good, i'm not in a router,
in folder C:\mir3server\Mud3\DBSrv300 in file !servertable.txt i found
;';' means Comment
; Followings have to be arrayed by server no.
;server no. connect-addr port connect-addr port.
1 81.96.161.3 7200
maybe i must change ip to 127.0.0.1 and change port to 7200??, but when i change this ip nothing happend still not can't make character
I make new topic with 2 new problem maybe second problem is connected with this problem. Thx for help
in folder C:\mir3server\Mud3\DBSrv300 in file !servertable.txt i found
;';' means Comment
; Followings have to be arrayed by server no.
;server no. connect-addr port connect-addr port.
1 81.96.161.3 7200
maybe i must change ip to 127.0.0.1 and change port to 7200??, but when i change this ip nothing happend still not can't make character
I make new topic with 2 new problem maybe second problem is connected with this problem. Thx for help
RaGEZONE Sponsor
RaGEZONE Partners
