[GUIDE] Cursor Broken/ Dissapears

Ok this post should be placed somehwere in Guides on top of the page. since its the most common problem i see on forums:

If you move your mouse over to your vendor, And if your Coursor dissapears , here is the guide how to fix that.

- Open Navicat.
- Double click on your database.
- Find Creature_names



--------------------------------------------------------------------------------------------
IF YOU SEE -MOUSEFLAGS- THEN FOLLOW THE NEXT STEPS:

1. CLICK ON FILE. (MAKE SURE U AT THE SAME SCREEN AS I AM)
2. CLICK -DESIGN TABLE-
3. NOW YOU WILL SEE A SCREEN WITH

- ENTRY
- NAME
- SUBNAME
-MOUSEFLAGS <------------------------- CLICK ONE TIME ON IT.

4. NOW SIMPLY REPLACE MOUSEGLAGS WITH Info_str
5. CLICK SAVE. OR CLOSE THE WINDOW AND IT WILL PROMPT SAVE FUNCTION

NOW:

1. Find a section called info_str (THAT YOU JUST MADE)
2. Scroll down to your vendors or whatever NPC in question.
3. In Info_str - next to your vendors/or npc in question - will be 0 (IF ITS EMPTY AND DOESHT HAVE 0 (ZEROS) THEN SCKIPTHIS GUIDE.

4. Remove Zeros (0) and leave it blank
5. Info_str must always be empty

NOW YOU NEED TO RESTART UR ASCENT SERVER AND DELETE YOUR CACHE FOLDER IN YOUR WOW DIRECTORY.


-------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------



FOR THOSE THAT HAVE ALREADY info_str (AND NOT MOUSEFLAGS)

1. Find a section called info_str
2. Scroll down to your vendors or whatever NPC in question.
3. In Info_str - next to your vendors/or npc in question - will be 0
4. Remove Zeros (0) and leave it blank
5. Info_str must always be empty

Here you go. Now go restart ur server. Delete your Cache In Your WOW folder.
restart ascent





iNFO_STR - MUST ALWAYS BE EMPTY .. IT CANNNOT HAVE 0 (ZERO) AS A VALUE.. ALWAYS EMPTY!

GOOD LUCK EVERYONE!oster_ss