[Guide] How To Make A Private Server

[killerdog]

[Guide] Server Tutorial + More [Updated]

Client Files


Ok i am makeing this thread because i am sick of all the people asking for help on this subject. first you need the flyff client files you can find here,

Spoiler

_____
v11
_____

To view the content, you need to sign in or register

_____
v12
_____

To view the content, you need to sign in or register

After downloading one of the clients run the Flyff Installer.exe a window should popup asking if you want toinstall flyff. Go through the prompts untill the last part it will have a check box and say Run Flyff
UNCHECK THIS OR IT WONT WORK.
Blackbox says: or you can Update fully to eFlyff's version 13, and then just fix your res files
note: remember where you installed your flyff client to you will need this information later.



Server Files

http://forum.ragezone.com/f456/flyff-clients-download-468711/ Official Client in various languages - Zerbero

http://forum.ragezone.com/f457/share-c-source-469831/ C# Source - DarkMan82/Organic

i dont know if these work i havent tryed them but if you do please post your resaults on how they work thank you!


Downloading and setingup MySql & Navicat


First you need to download mysql at this link

To view the content, you need to sign in or register

i recomend downloading the MySQL Community Server because its free and very useful.
When installing MySql it will ask you Typical, Compleat, or Custom, Pick Compleat then hit install.

When you are done you will need to install Navicat,

To view the content, you need to sign in or register

, on the right side you will see Navicat for MySql. For Me, i downloaded The Non-commercial (Free) - Lite version, once again because its free and has almost the same features.



Configureing Navicat



When configureing Navicat make shure your port is 3306(default) then make a localhost connection. i seguest that if you make a password to your localhost connection that you make it short... about four digits it will help when configureing a website and your server. After your MySql and Navicat are finnished installing you should search on google for a good MySql Database

To view the content, you need to sign in or register

for you lazy people who cant type Flyff Sql Database into google >.<. When you get the database open up Navicat then open your localhost connection make a new database called flyff, right click it and Hit Run batch file and locate your database file you downloaded. when this is done you cna procead to the final step.


Final Steps


Finally, you need to open your client folder and extract your server files into it. there should be 3 servers World Server, Character Server, and the Login Server. look for all the .ini files when you open your world server.ini you need to edit the ip (127.0.0.1) and your mysql location(neer the bottom) the world server is also where you change the message of the day (motd) and rates. In the login server and character server you have to change the ip and mysql server location. when your done click the servers in order 1 2 3... you should be able to remember that lol.

New:Website

Makeing a website is pritty easy, this guide will show you how to edit a template and host it with port forwarding. Note: you can also do this with your server, i will make a guide for that later.
You will need :

To view the content, you need to sign in or register

- because it helps alot
A brain
Paitence
First, go to the

To view the content, you need to sign in or register

And find your router. i use WRT54G (Linksys). You can find your model id on the router box.

When you click on it find what you want to port forward (HTTP)

now connect up to your router, By default the ip address should be set to 192.168.1.1.

To view the content, you need to sign in or register

your username and password should be admin unless you changed it. when your signed in go to the security tab and make it look like this:

Next, open up the applications and gameing tab and make it look like this:

Configureing your Firewall

Now lets set up your firewall, Note: yours may look diffrent im useing vista.
First, open up your control panel (Start > Control Panel)

under security you see"Allow a Program Through Windows Firewall", Click it, you should get a little popup like this and you want to click add port...:

You will need to do this next step twice, Once for UDP and once for TCP

Makeing a Web Name On DYNDNS

After your done port forwarding test your connection.
How to:

Spoiler

Get your ip

To view the content, you need to sign in or register

and type it into the url bar if that dosnt work use this

To view the content, you need to sign in or register

check your port 80. if your port is open it should say "Port 80 is open on (your ip)" if it says "Port 80 is closed on (your ip)" then you did somthing wrong. if you have further questions please contact me.

If your connection works then it is ok to move on.
What you will need:

To view the content, you need to sign in or register

-Duh
Ports forwarded
----------------
First go to

To view the content, you need to sign in or register

When your there it should look like this, Type your website name in the example box

When your done Hit Add. it will ask you to make a new account

~!NOT DONE I WILL UPDATE LATER!~




i hope i didnt forget anything ill add it later if i did : ) hope this helps
~Thank And/Or Post Plox~
Adding more pictures and maby a video later

 

[Roxuw]

Re: How To Make A Private Server Semi-Compleat

nice and clear guide.

 

[killerdog]

well i wrote it like i made it. if i left somthing out it was because my server crased and i made this guide when i was remakeing my server xD

oops i put it in the wrong section can someone move it to the Release section?

 

[Blackbox]

Re: How To Make A Private Server Semi-Compleat

After downloading one of the clients fun the Flyff Installer.exe a window should popup asking if you want to
install flyff. Go through the prompts untill the last part it will have a check box and say Run Flyff
UNCHECK THIS OR IT WONT WORK.
note: remember where you installed your flyff client to you will need this information later.

You don't have to worry about that

Update fully to eFlyff's version 13, and then just fix your res files... :3

 

[killerdog]

You don't have to worry about that

Update fully to eFlyff's version 13, and then just fix your res files... :3

eh im to lazy to fix .res xD but i will add it to the guide

does anyone have any spelling corrections (dont do grammer xD) or any wrong facts that i added?

 

[Lulex]

Re: How To Make A Private Server

Can i make a flyff server without havind de original flyff?

 

[OmgItsParm]

Re: How To Make A Private Server Semi-Compleat

oops i put it in the wrong section can someone move it to the Release section?

Will do
And try not to double post please.

Really nice guide btw.

 

[killerdog]

Bump cuz i saw more questions about it ..... xD

 

[royke77]

Hey I got one little question.. I see cant find the .ini files you're talking about? And where do I edit em

 

[Blackbox]

Hey I got one little question.. I see cant find the .ini files you're talking about? And where do I edit em

Run the game client on the official server first and the client will make it for you.

 

[Cresil]

It seems as though I cannot locate the .ini file(s). I've looked in all the folders, looked in all the server folders, and all I've seemed to have found was .res files and .XML files. Any suggestions?

 

[killerdog]

~gasp~ im back ... you can find the .ini files in the flyff folder They should be named Character Server.ini, Login Server.ini, and World Server.ini. if you still cant find them try useing the search function in your folder

Hope this helps,
Killer~

 

[Atix520]

Could you give a bit more information on how to start the server using navicat and mysql

Thanks <:

 

[bigboss0118]

tnx for this.... i g0 check this out..

 

[teeplyr]

Nice guide, going to help all those 1st time sever people.

 

[Taylorphan]

Re: [Guide] Server Tutorial + More [Updated]

I found a spelling error. Where it says "fun" the flyff installer or something lol at the top.

I'm using this guide to make my own server :]
hopefully it works! Looks like a very nice guide that you put some effort in :]

Thanks for the guide!

I also have a very noobie question....sorry...

How do i configure navicat and mysql? im pretty sure i got the configuring for navicat done, but im just asking just incase because when i try to connect, it would say.
Cannot connect to Mysql localhost or it would say access denied for localhost using password:YES

 

[killerdog]

Re: [Guide] Server Tutorial + More [Updated]

I found a spelling error. Where it says "fun" the flyff installer or something lol at the top.

I'm using this guide to make my own server :]
hopefully it works! Looks like a very nice guide that you put some effort in :]

Thanks for the guide!

I also have a very noobie question....sorry...

How do i configure navicat and mysql? im pretty sure i got the configuring for navicat done, but im just asking just incase because when i try to connect, it would say.
Cannot connect to Mysql localhost or it would say access denied for localhost using password:YES

thanks ~fixes the error~ and that means your prly accessing the wrong account or useing the wrong password OR not submiting one at all.