[Guide] Make your RoseOnline server public!

Status
Not open for further replies.
Joined
Aug 16, 2006
Messages
1,317
Reaction score
49
Location
Ontario, Canada
[Guide] Make your RoseOnline Server Public [Behind a router]


1. Finding your LAN IP.

First your are going to need to find your IP....
Go to: Start > Run > CMD > ipconfig
Look for a IP starting with 192.168.XX.XXX
This will be your lan IP address!!

2. Forwarding Ports.

Go to that IP in your browser.
A login dialog box should pop up...
If not, disable hamachi if you are using it.
Try again, if it shows up, Username: admin | Password: admin
Now look around at: for your router.
Look at how to get to the port foward page.
After you get there, your going to need to forward:

Port: 29000
Port: 29100
Port: 29200
Protocol: TCP AND UDP


3. Fowarding Them

Alright put those ports in the box, Start: 29000 End: 29000. Do this for all the ports listed above.
Now close that page. Restart your router. Relaunch the server.

4. Bat....

Your bat file should now look like this....
TRose.exe @TRIGGER_SOFT@ _server
WhatIsMyIP.org = The ip that's supposed to be there.

__________________________________ERRORS______________________________

Q) My users still cant connect.
A) You didnt forward them correctly, try again. ENABLE THEM!

---

Q) SUBMIT ONE
A) SUBMIT ONE
ONLY IF YOU HAVE AN ERROR.!!..!!!!




 
Status
Not open for further replies.
Back