[Help] my no-ip address not found when i try startup.exe

[shadowvzs]

pls somebody see the picture. why have error?

i used 1.02q server and 1.02q wind client

if port is 44405 then on launcher:
when i select my server inside the client its write me uo-left corner you are connected but i wait i wait and dont show me the login panel where i must type my name and password

if i use 55901 port then i build launcher then i can login and everything good, i can play and 10-15 sec disconnected me (second picture)

if i dont use my no ip adress (shadowvzs.myftp.org) and i use 44405 port then work, but every dial uping i have a new ip and i msut edit the files

information again:
i tryed everything(if i use actual ip then work properly then i think not mysql thing):

1. if everywhere is my actual ip then work fine

2. if i use everywhere my no-ip adress then i can conect to my server but client dont show me login panel

3. if i use in mapserver.dat and csconfid.cfg my no-ip adress and other place 127.0.0.1 then i can conect to my server but client dont show me login panel

3. if i use in mapserver.dat and csconfid.cfg my no-ip adress and other place my actual ip then i can conect to my server but client dont show me login panel

conclusion something have with no-ip adress.
my no-ip adress is shadowvzs.myftp.org
i use duc 2.2.1 no - ip program
now: "shadowvzs.myftp.org: DNS is current no update neeeded."
i use 1.02q server and 1.02q wind divison client
mysql server 2000
easyphp 8.1
muweb 0.6

ConnectServer\CsConfig.ini

# Using Customer End Edition , 1.00.xx - 1.02.xx (Translated by Forever)
[SETTING]
LISTenPort=44405
UdpLISTen=55557
MaxConnectNumber=20000
Does Not Renew)
Updatatime=60
UpOnline=13
Pattern (0 Disable , 1 Enable), Stochastic Computation in Striation Condition Progress
RanOnline=0

IP Address (Address for Service Length Cannot Surpass 16 Characters) + ", the" + Server Port
Parting Lines

[SERVER0]
LIST3=3,shadowvzs.myftp.org,55901

Data\IpList.dat (i tryed address with "" and without this symbol)

//IP List

"shadowvzs.myftp.org"

Data\lang\Chs\Commonloc.cfg

[ConnectServerInfo]
IP = shadowvzs.myftp.org
PORT = 55557

[GameServerInfo]
ClientExeVersion =1.02.13
ClientExeSerial =e8we2cw32dgr33dk
LootingTime = 60

Data\commonserver.cfg

............................................some row.....................................

Trade = 1 ; Trade (0 Disable , 1 Enable)
ChaosBox = 1 ; (0 Disable , 1 Enable)
ChaosEvent = 0
ChaosEventServer = shadowvzs.myftp.org

DevilSquareEventServer = shadowvzs.myftp.org
DevilSquareEventConnect = 0 ; The Regular Server Connects Ranking the Server Event Switch (0/1) (0 Connections)

;//~This is commonserver.cfg Edited and Translated by Forever~
;//----------------------------
EventChipServerConnect = 1 ; The Regular Server Connects the Valuable Box Event Server Switch (0/1)
EventChipServerIp = shadowvzs.myftp.org

............................................some rows.....................................

;//~This is commonserver.cfg Edited and Translated by Forever~
;//----------------------------

AttackSpeedTimeLimit = -2200 ; Don't Know !!!
MinimumAttackSpeedTime = -2200 ; Don't Know !!!
IsIgnorePacketHackDetect = 9999 ; Don't Know !!!
HackCheckCount = 5 ; Don't Know !!!
DecTimePerAttackSpeed = 0.01 ; Don't Know !!!
SpeedHackPenalty = 0 ; Don't Know !!!
IsKickDetecHackCountLimit = 0 ; Don't Know !!!
DetectedHackKickCount = 0 ; Don't Know !!!

EnableServerDivision = 0 ; Don't Know !!! (0 Disable , 1 Enable)
HackLogServer = shadowvzs.myftp.org ; Don't Know !!!
WriteChatLog = 0 ; Don't Know !!!
DisconnectHackUser = 0 ; Don't Know !!!
UseNPGGChecksum = 0 ; Don't Know !!!
WriteSkillLog = 0 ; Don't Know !!!
EnableCheckPenetrationSkill = 0 ; Don't Know !!!

Data\MapServerInfo.dat

// Map Server Infomation
// 1> . IpAddress:

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

BbBuMPpPpP​

 

[URun]

Re: [HELP] my no-ip address not found when i try startup.exe

Man use you global "noip" only in connect server and in connect server. In other places write 127.0.0.1 (in startup too)

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

Man use you global "noip" only in connect server and in connect server. In other places write 127.0.0.1 (in startup too)

but if i write only in Connect Server \ CsConfig.ini and to other file 127.0.0.1 then others can join to my server?

 

[URun]

Re: [HELP] my no-ip address not found when i try startup.exe

but if i write only in Connect Server \ CsConfig.ini and to other file 127.0.0.1 then others can join to my server?

Sorry and mapserverinfo.dat and in conect server configs
Yes all can join to your

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

Sorry and mapserverinfo.dat and in conect server configs
Yes all can join to your

port: 44405
dont work.

i cannot login(cannot show me login panel), i wrote to mapserverinfo.dat and in conectserver\CsConfig.ini my noip (shadowvzs.myftp.org) and other files 127.0.0.1 and dont work

there is the screenshot and all files where was ip, pls se it.......

port: 55901

i cant select server because automatical i can type my id and password, i can select my caracter and i can play but after 15sec diconnect me something(disconnecting from wind)

 

[teroare]

Re: [HELP] my no-ip address not found when i try startup.exe

god damn dude .. use ur ip in the onfigs :|

 

[URun]

Re: [HELP] my no-ip address not found when i try startup.exe

port: 44405
dont work.

i cannot login(cannot show me login panel), i wrote to mapserverinfo.dat and in conectserver\CsConfig.ini my noip (shadowvzs.myftp.org) and other files 127.0.0.1 and dont work

there is the screenshot and all files where was ip, pls se it.......

port: 55901

i cant select server because automatical i can type my id and password, i can select my caracter and i can play but after 15sec diconnect me something(disconnecting from wind)

I Dont like this connect server... use CzF CS
EDIT: CONNECT SERVER ADDED

 

[URun]

Re: [HELP] my no-ip address not found when i try startup.exe

god damn dude .. use ur ip in the onfigs :|

Really? see my configs? I test now 1.00.16 and it's my 1.00.16 configs. All works, and "global ip" only in 2 files csconfig.ini and in mapserverinfo.dat

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

I Dont like this connect server... use CzF CS
EDIT: CONNECT SERVER ADDED

same probleme with i wrote...

see the screenshot pls, now mysql password or id the probleme?

 

[URun]

Re: [HELP] my no-ip address not found when i try startup.exe

mysql? may be mssql? yes it's connect to base error. check your odbc

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

i tryed everything(if i use actual ip then work properly then i think not mysql thing):

1. if everywhere is my actual ip then work fine

2. if i use everywhere my no-ip adress then i can conect to my server but client dont show me login panel

3. if i use in mapserver.dat and csconfid.cfg my no-ip adress and other place 127.0.0.1 then i can conect to my server but client dont show me login panel

3. if i use in mapserver.dat and csconfid.cfg my no-ip adress and other place my actual ip then i can conect to my server but client dont show me login panel

conclusion something have with no-ip adress.
my no-ip adress is shadowvzs.myftp.org
i use duc 2.2.1 no - ip program
now: "shadowvzs.myftp.org: DNS is current no update neeeded."
i use 1.02q server and 1.02q wind divison client
mysql server 2000
easyphp 8.1
muweb 0.6

 

[URun]

Re: [HELP] my no-ip address not found when i try startup.exe

i tryed everything(if i use actual ip then work properly then i think not mysql thing):

1. if everywhere is my actual ip then work fine

2. if i use everywhere my no-ip adress then i can conect to my server but client dont show me login panel

3. if i use in mapserver.dat and csconfid.cfg my no-ip adress and other place 127.0.0.1 then i can conect to my server but client dont show me login panel

3. if i use in mapserver.dat and csconfid.cfg my no-ip adress and other place my actual ip then i can conect to my server but client dont show me login panel

conclusion something have with no-ip adress.
my no-ip adress is shadowvzs.myftp.org
i use duc 2.2.1 no - ip program
now: "shadowvzs.myftp.org: DNS is current no update neeeded."
i use 1.02q server and 1.02q wind divison client

Shadow, IT's not Connect server or IP CONFIG's Error! IT's DSN/ODBC Error! Join server don't connect to DB and in game u don't see login panel.

 

[Lightcookie]

Re: [HELP] my no-ip address not found when i try startup.exe

Lol u just need ur global ip in connectserver, joinserver, iplist, mapserverinfo, commonloc. all other 127.0.0.1

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

Shadow, IT's not Connect server or IP CONFIG's Error! IT's DSN/ODBC Error! Join server don't connect to DB and in game u don't see login panel.

i think it's imposible because if everywhere is my global ip then i can create my character and next time i can load with his stat.

Lol u just need ur global ip in connectserver, joinserver, iplist, mapserverinfo, commonloc. all other 127.0.0.1

yes but my global ip changeing every dial up and i sign up to ni-ip.org, i downloaded the progrem, i used but everytime when i write somewhere my no-ip adress i cannot login :/

 

[Lightcookie]

Re: [HELP] my no-ip address not found when i try startup.exe

Yea, i have the same problem as you.

So i use my dynamic ip and make every day a new launcher lol

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

Yea, i have the same problem as you.

So i use my dynamic ip and make every day a new launcher lol

nice =)) then we cannot resolve this dinamic ip probleme, because imposible

 

[danse]

Re: [HELP] my no-ip address not found when i try startup.exe

god damn dude .. use ur ip in the onfigs :|

and what if he has dynamic ip wich he has actually. Hym, will you change ip's in all files and launcher ( or main ) each time he restarts his PC ?

 

[shadowvzs]

Re: [HELP] my no-ip address not found when i try startup.exe

and what if he has dynamic ip wich he has actually. Hym, will you change ip's in all files and launcher ( or main ) each time he restarts his PC ?

not when restart my pc, but when i connect to the net. (i must change ips evreywhere including launcher and dont work with no-ip adress)