How to create a EP8 Cabal server Step by Step with Pictures

Initiate Mage
Joined
May 15, 2013
Messages
3
Reaction score
0
1. what client did you use?
2. what type of connection you use? LAN or WAN?
3. how much RAM you apply in VM ware for CentOS?
4.did you skip "yum update"?

also to @jazzdoit
 
Last edited:
Newbie Spellweaver
Joined
Nov 6, 2011
Messages
32
Reaction score
6


is your internal network 192.168.0.1? are you using a Cisco or another type of router?

The 127.0.0.1 are loopbacks and are fine.
 
Experienced Elementalist
Joined
Sep 26, 2008
Messages
211
Reaction score
2
1. what client did you use?
2. what type of connection you use? LAN or WAN?
3. how much RAM you apply in VM ware for CentOS?
4.did you skip "yum update"?


also to @jazzdoit

is your internal network 192.168.0.1? are you using a Cisco or another type of router?

The 127.0.0.1 are loopbacks and are fine.


I use VirtualBox and i reinstall the file server again and now work i see the server and i can play !!!

I use TGCabalEP8 with insternal file
I have a cisco EPC3825

192.168.0.1 are the gateway to rooter
192.168.0.16 are windows 7 ultimate (phisical )
192.168.0.17 are Centos 5.9 in VBOX

Can you tel me how i put the server online for the public?

Thanks for your help guys !
 
Initiate Mage
Joined
Jun 5, 2013
Messages
3
Reaction score
0
I have a problem.
When I launch the bat file of cabal-start.bat, the launcher comes up, I press play and nothing happens.
Also I have noticed that my processes are stoping (same as the other users, from ChatNode_01 right to the last one).
I have tried starting them by single commands but they are only switched on for maybe a few seconds.

My internal file is set up correctly and i have set up [service cabal config] correctly like it is said in the guide (I hope so.)
I used SkyCabal client.

Does any one know how to solve this ?
 
Newbie Spellweaver
Joined
Nov 6, 2011
Messages
32
Reaction score
6
1) When launching cabal-start.bat... you should have no launcher with a play button.
2) To start your services type service ChatNode_01 start. Same with all non started ones. then install the new start command that was released Service Cabal new commands - hefajstos
 
Initiate Mage
Joined
Jun 5, 2013
Messages
3
Reaction score
0
What happens is:

I click on cabal-start.bat which is located in my client folder.
The launcher shows up as it would normally if I was to play that server and starts updating.

I have copied the Data folder from the patch and put it in client folder.
My infernal file is located in SkyCabal/Data and it looks like this:

[MD5CHECK]LANGUAGE_SKIP = 1
ALL_FILE_CHECK = 0


[server]
IP=192.168.2.10
PORT=38101
IP_CHAT=192.168.2.10
IP_PORT=38121
CMK=0

Services still keep on stopping.

For example, I start the server via [service cabal start]
It shows all of the services are [OK]
Next I type the command service cabal status and all of services down from ChatNode_01 are stopped,
so than I switch them on manually one by one by the command service ChatNode_01 start.
After that I type service cabal status again to check weather the services are OK and the same ones are still stopped.
 
Experienced Elementalist
Joined
Sep 26, 2008
Messages
211
Reaction score
2
Did you use Vbox the last version becouse this are happent to me on vmware
 
Initiate Mage
Joined
Oct 5, 2012
Messages
3
Reaction score
0
hello
I have problem, after I follow tutorial from last page I got no server
 

Attachments

You must be registered for see attachments list
Initiate Mage
Joined
Jun 5, 2013
Messages
3
Reaction score
0
Did you use Vbox the last version becouse this are happent to me on vmware

Still the same problem with the processes.
They keep on stopping and yes it's the same ones as before.
I have downloaded the newest Vbox and installed it and still the same thing happens.

Any other ideas?
Someone help me ^^ pweasee
 
Newbie Spellweaver
Joined
Aug 6, 2010
Messages
69
Reaction score
10
Uploaded with

All services online, click on connect nothing happens. Any toughts?

Running "service cabal config" again and setting the "ip players connect" to my local network ip, not noip one, it logs..what now? cant put this online?
 
Last edited:
Newbie Spellweaver
Joined
Jun 13, 2013
Messages
5
Reaction score
0
hello to all ragezoner . i got same problem as @brunno951 can anyone guide about this problem thanks .
 
Newbie Spellweaver
Joined
Jun 27, 2013
Messages
15
Reaction score
1
hi there
i have a problem i installed everything my all services runs normally. i type my id and pw in client and when i press Okey buton "Moving to Select Seerver Screen" appears then fastly disappears
ant nothing happens , no any any errors just nothing i ve tried everythings its been 3 days i ve ready everythings about cabal in this forum but i couldnt fix it.i ve tried 3 differen clients
1-Simpy cabal
2-Cabal Machine
3-Nexus cabal
all clients doesnt move me to select server screen, nothing happens.
This is Screnshoot of login screen View attachment 133729

and there is my log files View attachment 133730
my english is not perfect but i hope u guys can understand what i mean
İf anybody help me that would be im going to loose my mindgreat have a nice day.


[root@localhost ~]# service cabal start
Starting AuthDBAgent: [ OK ]
Starting DBAgent_01: [ OK ]
Starting RockAndRollITS: [ OK ]
Starting GlobalMgrSvr: [ OK ]
Starting GlobalDBAgent: [ OK ]
Starting CashDBAgent: [ OK ]
Starting PCBangDBAgent: [ OK ]
Starting EventDBAgent: [ OK ]
Starting PartySvr_01: [ OK ]
Starting ChatNode_01: [ OK ]
Starting EventMgrSvr: [ OK ]
Starting AgentShop_01: [ OK ]
Starting LoginSvr_01: [ OK ]
Starting WorldSvr_01_01: [ OK ]
[root@localhost ~]# service cabal status
AuthDBAgent (pid 3702) is running...
DBAgent_01 (pid 3728) is running...
RockAndRollITS (pid 3749) is running...
GlobalMgrSvr (pid 3766) is running...
GlobalDBAgent (pid 3783) is running...
CashDBAgent (pid 3809) is running...
PCBangDBAgent (pid 3835) is running...
EventDBAgent (pid 3859) is running...
PartySvr_01 (pid 3886) is running...
ChatNode_01 (pid 4207) is running...
EventMgrSvr (pid 3927) is running...
AgentShop_01 (pid 4248) is running...
LoginSvr_01 (pid 3962) is running...
WorldSvr_01_01 (pid 4287 3979) is running...
 
Skilled Illusionist
Joined
Jun 3, 2007
Messages
315
Reaction score
9
Hello guys, All services are running....got the client..replaced the internal file ....if someone could just tell me how to register an account into the db...it would be greatly appreciated. I've read four guides on ep8 thus far and all four stopped after..."starting the client". So...any help with this would be awesome. (Maybe it should even be stickied). Just tried to register account (dbo.cabaltool.register account ) query ended with errors. account not registered. Also...when we edit the client patch...do we need to change the port value? (for instance...to 1433) or leave it alone ? and both IPs change to Centos Ip ? Oh..and here is the errors I got when executed cabaltool.... Msg 8152, Level 16, State 11, Procedure cabal_tool_registerAccount, Line 6 String or binary data would be truncated. The statement has been terminated. Msg 515, Level 16, State 2, Procedure cabal_tool_registerAccount, Line 12 Cannot insert the value NULL into column 'UserNum', table 'Account.dbo.cabal_charge_auth'; column does not allow nulls. INSERT fails. The statement has been terminated.
 
Last edited:
Newbie Spellweaver
Joined
Jun 27, 2013
Messages
15
Reaction score
1
What about this how i could fix that error
[Sun Jun 30 2013 12:10:29.723542 3078441840]: [##ERROR##] OnIPCAuthAccount fail (ID: ananinami, usernum: 0, Time: 72)
[Sun Jun 30 2013 12:10:29.723653 3078441840]: [##ERROR##] DB ERROR(MSG) : [FreeTDS][SQL Server]Must declare the scalar variable "@IP".
[Sun Jun 30 2013 12:10:29.723695 3078441840]: [##ERROR##] DB ERROR(CODE) : 137
[Sun Jun 30 2013 12:10:29.723730 3078441840]: [##ERROR##] DB ERROR(VAR_INFO) :
[Sun Jun 30 2013 12:10:29.723765 3078441840]: [##ERROR##] DB ERROR(SQLSTATE) : 42000
[Sun Jun 30 2013 12:10:29.723800 3078441840]: [##ERROR##] DB ERROR(STM_TEXT) : {call dbo.cabal_sp_auth_netcafe( ? , ? , ? , ? , ? )}
[Sun Jun 30 2013 12:10:29.804551 3078441840]: Database Connect success!
[Sun Jun 30 2013 12:10:29.804855 3078441840]: [##ERROR##] 'OnIPCAuthAccount' fail (Database/Auth.cpp:262)
[Sun Jun 30 2013 12:10:29.804923 3078441840]: [##ERROR##] UsrMap Fail : MainCmd(30) Ret(106:0:262) Addr(127.0.0.1) CharIdx(0)
 
Skilled Illusionist
Joined
Jun 3, 2007
Messages
315
Reaction score
9
I tried both xp_md5.dll (32) and xp_md5_64.dll ...I placed each in a different loction (multiple times) and still have the same registering error ....could anyone share their Account table...or a means to fix this and register an account please ?
 
Skilled Illusionist
Joined
Jun 3, 2007
Messages
315
Reaction score
9
Anyone? Please reply. Many of us are looking for the same answer on this. personally, I think any guide should have server setup AND client setup instructions...beginning to end....why would anyone make a guide and stop in the middle ?? I think that could be one of the biggest reasons why there are so many people asking soooooo many questions (most of which are the same ones) ....ALL the guides I have read have stopped at patching the client....NONE of the guides on the ep8 files have explained how to create an account....NONE of the guides on the ep8 files even mention the xp_md5.dll at all. And the people that have been fortune enough to figure it out....are being very tight lipped about it. It's horribly frustrating to almost get things working and then run into a brick wall.
So...could someone kindly explain why we are getting the error when trying to register an account?? Does it have anything to do with the columns within the database NOT allowing Nulls ??
 
Initiate Mage
Joined
Jul 4, 2013
Messages
2
Reaction score
0


i had same problem, i think u need to use (CentOS-5.8-i386-bin-DVD), not x86 or x64...
 
Newbie Spellweaver
Joined
Jun 22, 2012
Messages
30
Reaction score
8
for me, it seems to be an internal communication problem. is your firewall enabled? try "service iptables stop" and then restart the cabal services