How to save my ports?

[iliametla]

if i putted my ports on my router how do i save them?

guys please help me
i added the ports but how i make sure the ports will be open
how i open them.
and karLi if you here
in Main ip what i change you said 89.xxx.x.x you mean 196.168.0.1 to this>>>>>89.168.0.1

 

[KarLi]

just put ur

To view the content, you need to sign in or register

< ip to main.exe instead 89.xxx

and to be sure u opened , run ur server everything and go to

To view the content, you need to sign in or register

and put ur port numbs and test.

 

[iliametla]

karLi i tested it and its says
the he cant see the port service
can you say me how i activated it i seach in google and nothing
Modemlink 2760U
Please Tellme
here is a picture

To view the content, you need to sign in or register

 

[KarLi]

the server ip adress is wrong u must use the one from ur lan ip which u can find if u go to CMD > Type ipconfig > and copy the IPv4 ip . put it there instead 10.0.0.7 and it will work .otherwise nothing will work cus its wireless connection.

 

[iliametla]

Now its typing Connection is timed out?...

 

[KarLi]

u runned server first and then tested?

 

[iliametla]

i will try and replay you an answer today

and i got 1 question
all the ips with 127.0.0.1 should i change it to my GLOBAL IP or something?

ok i did all steps
i made in my router ports 44405 and 55901 with 10.0.0.1 that was in my Ip config
i have changed the main ip again to the global ip of mine
then i checked with Port Checker Tool and its says connection timed out and my Main giving still DC..
PLease karLi wright in steps what should i do like this:
1)First follow the guide of you
2)Change Ip Main and remove the Dll Main
3)Open ports 44405 and 55901 on my wireless router with 10.0.0.1
4)Check first Port Checker or Run Server First Which giving me Dissconnnect.
Guide me like this i will try to follow
And karLi i appreciate you godly help.

To view the content, you need to sign in or register

 

[Cryingsoul]

Don't replace "sa" with "admin", cus then it wont connect. How about disabling your firewall? And retry.

 

[iliametla]

ok i will try and replay to you.
i am kinda thought about that.

ok i did with the sa.
But do in StartUp i should change the 127/0/0/1 to my ip address?
or leave it.
and Another Question
i opened the ports and turned off the firewall and its said Connection Refused.
Another Question in do ineed change maybe ip on commonclist or ip list
or not?because you guide dont mention that.
look its still giving me this.

To view the content, you need to sign in or register

 

[KarLi]

i think the 10.0.0.1 its failed adress.

and the other problem could be that u have Wireless connection.

 

[iliametla]

here is some pictures of my router
if you think 10.0.0.1 if said address so what is right address?

To view the content, you need to sign in or register

To view the content, you need to sign in or register

To view the content, you need to sign in or register

 

[KarLi]

cmd>ipconfig and screenshot

 

[iliametla]

Ipv4 Address>>10.0.0.1
Subnet Mask>>255.255.255.0
Default Gateway >>>>10.0.0.138
This what is writing me only
Can you Tell me what is server IP address?

 

[KarLi]

its weird idk what the ipv4..
u have wireless thats the problem i guess .

 

[iliametla]

so what to do...

 

[KarLi]

i tell u what i need to know..

run ur server all again


go to

To view the content, you need to sign in or register

type 44405 and test.
tell me results..

same with 55901 port.

if it success
then u didnt edit ur files and client main.exe with ur ip correctly.

if error = bad. . cus of wireless
u must use hamachi or change connection to cable/router or modem.

 

[iliametla]

i found out that i got wireless
so i install hamachi what then?

 

[KarLi]

yea install hamachi or remove wireless and use internet with cable connection to ur router or modem or whatever.