How to Skip Port Forward

[I'm Not MentaL]

Plug your Ethernet Cable directly to your Modem, not Router.
then you no need to Port Forward.

 

[mukuba]

How can it be? the port is automatically forward to the modem? maybe not Sir LatneM.

 

[AsenDURE]

Good guide, I am using Fixed IP (static IP) , no port forward needed. Easy

 

[I'm Not MentaL]

Good guide, I am using Fixed IP (static IP) , no port forward needed. Easy

Using UniFi Biz?

 

[deedz12]

i want to learn how to port forwarding my router Bufallo WHR-G301N the only biggest problem is i cant read japanese >.< i can direct plug my internet wire but its only 1 socket so i need a extension. cause there is another using computer..

 

[tearhear18]

deedz12
on your computer
click start then find and click Run

type: cmd > then enter

in command prompt "
type: ipconfig then find your default gateway address: mine is 192.168.0.1

then open your beloved browser . mine is google chrome
in url type: your default gateway address mine is 192.168.0.1

then enter accounts: mine is default username:admin pass:admin (linksys) tplink-username=admin pass=password netgear:username=admin password=password buffalo username=admin pass=1234 or password or admin try any of them
or if someone is setting up your router you can easily reset your router, look at the back of your router inline with WAN PORTS use paper clip to press button 10 - 20 secs or until you see the power indicator is blinking

configure your port forward just look over the nav of router gui

 

[jyap1021]

when i plug it directly to my pc, what ip do i need to put on cfg and parram?

 

[I'm Not MentaL]

when i plug it directly to my pc, what ip do i need to put on cfg and parram?

Wan IP

 

[jyap1021]

i already plug it directly on router but
bind Error. Error Code:10049

 

[kalso11]

If you want to know how to port port forward using buffalo! just 1st you may know your Lan IP!

RUN > CMD > IP CONFIG/ALL

NOW IF YOU ALREADY KNOW YOU LAN IP

GO TO YOUR AIRSTATION SETTINGS. MINE IS [

You must be registered to see links

] THEN LOG IN WITH YOUR DESIRE USER AND PASSWORD

I THINK DEFAULT USER AND PASSWORD IS ROOT = 1234 CORRECT ME IF IM WRONG

IF YOU ALREADY YOUR AIRSTATION

GO TO LAN CONFIG > PORT FORWARDING MAKE A GROUP NAME OF YOU CFG PORT

THEN CHOOSE TCP / UDP > THEN PUT YOUR PORT THAT YOU WANT TO FORWARD

LAN SIDE IP ADDRESS IS YOUR LAN IP

AFTER THAT ON LAN SIDE PORT > PUT SAME PORT THAT YOU WANT TO FORWARD.

PRESS ADD.

AFTER THAT YOUR DONE.

IF YOU WANT TO PUT OTHER PORTS GO BACK TO THE GROUP NAME AGAIN
THEN FOLLOW THE INSTRUCTION AGAIN..