Welcome!

Join our community of MMO enthusiasts and game developers! By registering, you'll gain access to discussions on the latest developments in MMO server files and collaborate with like-minded individuals. Join us today and unlock the potential of MMO server development!

Join Today!

Installing ''Microsoft Loopback Adaptor''

HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
go : Start>Control Panel>ADD HardWare and fallow the next steps! easy!


Step 1
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP 2
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP 3
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP 4
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP 5
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP 6
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP7
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


STEP 8
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


---------''Microsoft Loopback Adaptor'' DONE---------​

RESTART YOUR PC!

Now go START --- RUN--- Type cmd--- then type ipconfig

and you will see:

HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


If you dont see this make sure you have both Network connection set to get Automatical IP and RESTART Agin the PC!

And go to Network connection and you will se the Local Area Connection2
Configurate the IP like this:

HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums
 
HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

After this go to your router and create a DNS Server with your local IP: 192.168.1.xx

HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


And from Advenced Security open the ports!
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums




Than go : C:\Windows\system32\drivers\etc\
Open the ''Host file'' and u will see the followed information :

Code:
# Copyright (c) 1993-1999 Microsoft Corp.
#
# Dit is een voorbeeld HOSTS-bestand dat wordt gebruikt door Microsoft TCP/IP for Windows.
#
# Dit bestand bevat de toewijzingen van IP-adressen naar hostnamen. Elke vermelding
# moet op een afzonderlijke regel staan. Het IP-adres dient in de eerste kolom te worden
# geplaatst, gevolgd door de bijbehorende hostnaam. Het IP-adres en de hostnaam dienen 
# gescheiden te zijn door ten minste
 
Last edited:
Newbie Spellweaver
Joined
Jul 7, 2008
Messages
16
Reaction score
1
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

ths is for play in same pc with server?
 
Newbie Spellweaver
Joined
Jul 14, 2008
Messages
31
Reaction score
0
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

why should i use this?how can it helps me?
 
HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

ths is for play in same pc with server?

yes

♥ Deiulicious ♥;3856838 said:
why should i use this?how can it helps me?

Because some people who have Router cant open server! And they shay...

Hey man i have a problem I start server all Good all run OK but i cant see the server what happend?......


Soo here i come, with my guide!
 
Newbie Spellweaver
Joined
Jan 7, 2007
Messages
13
Reaction score
0
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

I havent router, i install "Microsfot LoopBack Adapter".
And CS show error "Connection network disconnected" in red color.
LoopBack connection "Connectivity limited or nulled" and i dissabled connection default from windows.
I have selected option "Obtain an IP address automatically" I select the option below?.
Sorry for my bad english, im from Argentina.
 
HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

you must set the IP on LoopBack Adapter

Like here:

HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


And dont forget about PORTS!

[ tienes que usar todo como es en la imagen, si usas los mismos tiene que andar!(sorry for my bad cattalan) suerte]
I no te olvidas de abrir los ports!
 
Legendary Battlemage
Loyal Member
Joined
Dec 13, 2007
Messages
613
Reaction score
161
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

tks..
 
Newbie Spellweaver
Joined
Aug 27, 2008
Messages
6
Reaction score
2
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

Do u have the guide for linksys instead? From the dns part i dun understand, if ur talking about the router, if ur not talking bout the router, then tell us the site?
 
Divine Celestial
Loyal Member
Joined
Aug 24, 2007
Messages
890
Reaction score
5
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

where i can download this Microsoft Loopback Adapter?

is this software or drives or a kind of thing?
 
HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

where i can download this Microsoft Loopback Adapter?

is this software or drives or a kind of thing?

Start>Control Panel>ADD HardWare and fallow the steps
turn the Control Panel to clasic view!
 
HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

Do u have the guide for linksys instead? From the dns part i dun understand, if ur talking about the router, if ur not talking bout the router, then tell us the site?

go to your router and create a DNS Server with your local IP: 192.168.1.xx

exemple in this img:
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums


And from Advenced Security open the ports!
The ports are someting like TCP IP:192.168.1.xx start to: 80 end : 80

do not open ports like start 80.... end 55999 this is crapy!:punch:

exemple in this img:
HurryPoker - Installing ''Microsoft Loopback Adaptor'' - RaGEZONE Forums
 
Newbie Spellweaver
Joined
Sep 6, 2006
Messages
14
Reaction score
0
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

go to your router and create a DNS Server with your local IP: 192.168.1.xx

exemple in this img:


And from Advenced Security open the ports!
The ports are someting like TCP IP:192.168.1.xx start to: 80 end : 80

do not open ports like start 80.... end 55999 this is crapy!:punch:

exemple in this img:


Im look u post neet more information of routers
 

Attachments

You must be registered for see attachments list
Divine Celestial
Loyal Member
Joined
Aug 24, 2007
Messages
890
Reaction score
5
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

Im look u post neet more information of routers
put your local ip in x:\windows\system32\drivers\etc\hosts
 
Newbie Spellweaver
Joined
Mar 3, 2007
Messages
44
Reaction score
3
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

thax.
 
Junior Spellweaver
Joined
Aug 14, 2006
Messages
103
Reaction score
6
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

there is a video
 
Initiate Mage
Joined
May 22, 2005
Messages
1
Reaction score
0
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

what ports i should open >? why you deleted numbers from ports?
 
HOT z
Joined
Sep 9, 2005
Messages
316
Reaction score
8
Re: [Guide] Installing ''Microsoft Loopback Adaptor''

what ports i should open >? why you deleted numbers from ports?
because are secret for my server security! the server ports like:


JoinServer
Port = 55970 or your port!


DataServer1
Port = 55961 or your port!


DataServer2
Port = 55963 or your port!


ExDataServer
Port = 55906 or your port!


EventServer
Port = 44456 or your port!

RankingServer
Port = 44455 or your port!
 
Last edited:
Back
Top