• Unfortunately, we have experienced significant hard drive damage that requires urgent maintenance and rebuilding. The forum will be a state of read only until we install our new drives and rebuild all the configurations needed. Please follow our Facebook page for updates, we will be back up shortly! (The forum could go offline at any given time due to the nature of the failed drives whilst awaiting the upgrades.) When you see an Incapsula error, you know we are in the process of migration.

Login Error

Omnija

凸(ಠ益ಠ)凸
Loyal Member
Joined
Jun 16, 2008
Messages
1,665
Reaction score
227
Is unable the segment. please shorty after tries?
 
Last edited:

grug

Newbie Spellweaver
Joined
Apr 5, 2009
Messages
8
Reaction score
0
That means the client was unable to connect.

You can check this post in the server setup guide for help. http://forum.ragezone.com/f96/server-setup-faq-troubleshooting-guide-361848/#post3206969

Basically, you need to change the ipdata.ini in the client files, set all patch server ports to 11030 and all login server ports to 11031. However, when setting up your server, use the port 11030 for everything. Everything can be setup with port 11030, I did try using port 2000, but it didn't work for me.

At least that's how I solved it.

Also for some reason, I needed to use numeric user names, as using anything else came with a "account does not exist" error.

Edit: There can also be a problem with your hex edited Gameserver.exe IP configuration, if you are behind a router you must use the IP supplied to you by your router, not the IP supplied to you from your ISP. This is also true for anything else that requires you to supply an IP for it to use. So if you are on the same network connecting to your server, you'll have to connect to the IP that your router supplied to your server. I hope that came out somewhat understandable.
 
Last edited:
You must log in or register to reply here.