Recommend a PC Case

[Mazo]

Alright, I'm building my new system so I'm looking for a new PC case. I have no idea which one I should go with so here's what I'm looking for.

Sub

 

[Sardaukar]

Take a look at the Coolermaster Stacker cases.. thsoe are perfect cases

Not sure on the price, but I -think- you may be able to find one for around 100 give or take with your monetary amount



My next modding case will be one.. so tahts definatly a good thing to own =)

Newegg.com - COOLER MASTER CM Stacker STC-T01-UWK Black/ Silver Aluminum / Steel ATX Full Tower Computer Case - Retail

 

[Mazo]

Decided to go with the Antec 900 case. Cheers anyway Sar

 

[deadly2003]

this one seems to hit all ur questions Antec Nine Hundred Ultimate Gaming Case ... and i have herd its a really nice case also...

(its been recommended to me a few times but i got the stacker 830 cos i had the monies)

where the dule fans are u can put a double rad... might beable to fit a triple in there not sure tho...

it also comes with a load of features which many cases dont have...

i would say for u get this one...

 

[NoPeace]

That 900 series case is going to be a pain to work with. Especially if you get a large pump like the D9s and using 1/2" tubing.

NoPeace - out

 

[Lithic]

That 900 series case is going to be a pain to work with. Especially if you get a large pump like the D9s and using 1/2" tubing.

NoPeace - out

Extremely true..


I just got a DangerDen Armor case...
Dont recommend it, thing weighs about 30 lbs empty.

 

[deadly2003]

That 900 series case is going to be a pain to work with. Especially if you get a large pump like the D9s and using 1/2" tubing.

NoPeace - out

u sure i seen one of thos u can make room if u remove the hdd cages then u get way more room to work with... just need to find a way to secure ur hdds which is not really hard... thats what i did to my one

the antec P180 is also a good case Linky

and for

 

[NoPeace]

u sure i seen one of thos u can make room if u remove the hdd cages then u get way more room to work with... just need to find a way to secure ur hdds which is not really hard... thats what i did to my one

the antec P180 is also a good case Linky

and for

 

[LifeExpired]

ThermalTake make nice cases, dunno if its what your looking for but it might be a nice idea to check there website out.

 

[deadly2003]

btw mazo u any good at modding cases... as if u do water cooling u will need to do a little self modding at times to get the parts to fit etc...

for my wc i has to do a little modding so its expected, but for u i think u should have a extenal wc as which the P182 it has rubber holes in the back for letting the tubes go out... this will basicly give you way more room inside the case and would look cooler if u set it up right...